User's Manual Part 5

STAREX-IS BSM Manual

Page:541(877)

Issue:1.

SMD-011-PMA210

4.8.4.6. Humidity Set Command

This is the command to set the threshold value of humidity of which the environment

monitoring module takes control. If humidity surpasses this threshold value, the alarm

is generating.

• Command SET-ENV-HUMI:[BSC=a],[BTS=b],[HI_HUMI=c];

a : BSC Number(0 ~ 11)

b : BTS Number(0 ~ 47)

c : High Humidity(0 ~ 100)

• Input SET-ENV-HUMI:

• Display

a : Locate Information

b : ##PROC_NOT_EQUIP

##PROC_ABNORMAL

##THIS COMMAND IS IN SERVICE

##NOK - BTS TYPE MISMATCH

##NOK - BAMA ABNORMAL

##NOK - ACU ABNORMAL

##NOK - RECTIFIER ABNORMAL

##NOK - BAMA NO RESPONSE

##NOK - ACU or REC NO RESPONSE

##NOK - UNKNOWN REASON

##OK - SET ACU HUMIDITY COMPLETED

4.8.4.7. Environment Alarm Display Command

This is the command to display the parameter value, flag status, history and other

things presently stored in the environment monitoring module.

MSC(0x00) date time

M8035 SET ACU HIGH HUMIDITY ALARM LIMITS VALUE

LOCATE = a

RESEON = b