User's Manual Part 6

STAREX-IS BSM Manual

Page:574(877)

Issue:1.

SMD-011-PMA210

4.9.6.3.7.5. Status Display

Fig 4.9-34 Display Status by Board

4.9.6.3.7.6. Alarm Display

Fig. 4.9-35 Alarm Display by Board.

4.9.6.4. Suggestions on Operation.

4.9.6.4.1. Status Management

The status and alarm are displayed in turn at 2-minute intervals in managing each

board.

If there is no Alarm it displays the status color.

4.9.6.4.2. The Order of Priority

The stmGUI receives the process results of the status block (STMX) and fault block

(TRMX) to reprocess them. Therefore, both of the two blocks should be normally

operated for the normal operation. If the initial data setup of STMX has not been done

while BSM is running, stmGUI may display undefined values. In this case, press update