User's Manual Part 6

STAREX-IS BSM Manual
Page:551(877)
Issue:1.
0
SMD-011-PMA210
.
4.9.3.3. Batch Processing Set Area
Job Name
It is the name of the work to be set and added into the Job Group when storing. The
maximum length of the name is restricted into 40 letters.
Run Type
Set if the work to be operated with a cycle, or at the specific time. (ONCE, CYCLE)
Start Time
It is the starting time of the work and the present time of the system is filled in the
data field as a basic value.
End Time
It is the ending time of the work and the next date for the present time of the system
is filled in the data field as a basic value. If the ending time has passed the present
time it takes the Run Flag off.
Cycle Time
It designates the hour and minute to execute the next command when the Run Type is
set as Cycle.
Interval
It is the time between each command represented in seconds (1~6000) when several
commands are input in single work name. Interval over 5sec is recommended.
Run Flag
It represents whether the set batch processing is executed. (ON, OFF)
List Area
Job Group
It is the list of registered works and the key value, which controls DB.
Command List
It is the list of commands for single work. Maximum four commands can be input.
Command Input Text Field
It is the field on which the command is input.
4.9.3.4. Menu Field
Test
It is the menu to test if the command for the presently selected work or the work for
which the input is performed is input without error.
Insert