User's Manual Part 6

STAREX-IS BSM Manual
Page:582(877)
Issue:1.
0
SMD-011-PMA210
Adding neighbor belongs to other MSC requires the user to input all the information.
Fig. 4.9-46 Default Value upon Input
Select a field to be input then the system shows the default values. To select a value
input the value onto the corresponding input space or select one among the values in
the lower part with mouse. Press OK after the input is done or press Cancel to return
to the Main screen.
4.9.7.3.5. Neighbor Deletion
Deletion can be completed with two kinds of method.
Press the corresponding line in the lower part or press the BTS sector button.
4.9.7.4. Suggestions in Operation
4.9.7.4.1. The order of priority
Graphic Neighbor is a tool for adding/deleting neighbors. Therefore, performing
extension or deletion with MMC can bring out a wrong result while the Graphic
Neighbor is being used. And if it is performed the user should run the Graphic
Neighbor once again. The neighbor intercommunicates with the configuration block
(CDMX) through MMI block. Consequently, the two blocks should be in normal
operation.