User's Manual Part 6

STAREX-IS BSM Manual
Page:554(877)
Issue:1.
0
SMD-011-PMA210
4.9.3.6. Batch Job Operation
4.9.3.6.1. Open Window
Select IO menu of “INTERM”, which is command I/O window, and click Batch Job then
the window is opened.
4.9.3.6.2. Job Input
Job name is the key value that controls DB so it should be the one and only value.
When selecting insert menu it would not be stored unless the job name is input. The
data field restricts the number of letters when inputting the data; emits alarm sound
when it is exceeded. The figure input part is configured with the field in which the
figure can be input manually and the buttons that change the figures. The maximum
and minimum value is designated so if the figure exceeds this scope, it is set as a
minimum value; if a letter is input the system emits alarm sound. After one command is
input in the command input field, press ‘Enter’ key then it added into the command list.
If a wrong command is added, select the list and press ‘Delete’ menu then it will be
deleted.
Fig. 4.9-7 Batch Job Input