User's Manual Part 1

STAREX-IS BSM Manual

Page:151(877)

Issue:1.

SMD-011-PMA210

Fig. 4.2-3 Flash Memory Update Result

4.2.1.4. Processor Loading Request on the Standby Side (SBY-LDNG-

PRC)

It is the function that requests the loading to standby side of the processors. The

target processors that can perform the Standby loading should be duplicated and both

A and B sides should be normally operated. (If they are not duplicated or abnormal, the

Standby loading cannot be performed.)

The target processors that can request the processor loading on the standby side are

as follows: CNP, PNP, PCP, PMP, NCP, CCP, SCP, and BSP.

 Command : SBY-LDNG-PRC:[BSC=a,][BTS=b,]PROC=c ;

a : BSC ID [ Number 0~11 ]

b : BTS ID [ Number 0~47 ]

c : Processor Name [ CNP, PNP, PCP0, PCP1, PCP2, PMP0,

PMP1, PMP2, NCP, CCP, SCP, BSP ]

4.2.1.5. Processor Switching-over (ACT-PRC)

The command to switch over the processors is switch over the Active Side of the

target processors which operate as NORM(OLD) and NORM(NEW) after performing

standby loading.