User's Manual Part 1

STAREX-IS BSM Manual
Page:41(877)
Issue:1.
0
SMD-011-PMA210
BSM collects and stores the data that are needed to evaluate behavior and trend that
occur in BTS and BSC and to determine the extension or reduction of the system by
interworking with BTS and BSC. Regarding the performance data collection, it is divided
into the following: to collect data in a cycle (5min./1hr./1day/1 month) and to collect the
data at the operator’s request. At the operator’s request, it displays the statistical data
that are stored or controls the statistical functions that are currently executed. The
collected data are as follows: call-related data, NE use rate, frequency of fault
occurrence, etc.
1.2.4. Security Management of System
It authorizes the manager that operates and manages BSM, develops log for messages
that are generated in the system and the command by the user and processes the
information.
 All the BSM commands have the execution authority level.
 Operator ID should have passwords, and when logging in, the passwords should
be input.
 The user with the upper level can have all the authorities that the user with the
lower level has.
 Only the user with the upper most level can change the command class.
 When performing the work through the network, if there are too many users
that perform the work at the same time, all the on-line messages that come to
the system should be notified to the system and the message that comes
through the command should be displayed on the corresponding window.
BSM Application
Access
Right
Check
User
Log-in
Login
Check
Command
Out
p
ut
User Data