User's Manual Part 2

STAREX-IS BSM Manual
Page:435(877)
Issue:1.
0
SMD-011-PMA210
Fig. 4.5-12 Result of Trunk BER Test Performance
4.5.4.2. PING Test Function
Function to check Link Status for the Target Processor by the Master Processor that
was input to MMI of BSM by using the Ping command
Ping test is divided into Point To Point Test and Point To Multi Test.
• Command TEST-PING:SRC=a,DST=b[,BSC=c][,BTS=d][,SMP=e
][,VMP=f][,PCF=g];
a: Source Processor
b: Destination Processor(If there is input, it is PTP, if not, it is PTM)
c: BSC number(0~11)
d: BTS number(0~47)