User's Manual Part 2
STAREX-IS BSM Manual
Page:442(877)
Issue:1.
0
SMD-011-PMA210
the original data to validate the quality of voice. (FER measured at SLP)
• Data Rate
User can designate voice data rate to be used for testing call. The data rate is divided
into the following: Full rate, Half rate, Quarter rate, Eighth rate, and Variable rate.
4.5.5.1. BSC Virtual Call Setup Function
Function to designate various options and setting up Call to a specific MS or all the
MSs MS to be tested should be entered to BSM DB with INS-TEST-MS command.
When TEST_KEY is not input, testing calls are set up for all the MSs stored in DB.
Testing Call is attempted for 60 minutes at a maximum. Once a Call is set up, it is
maintained for 60 minutes. If a call is disconnected due to the occurrence of faults, or
when a user released the call at random, a message for the reason of call release is
displayed.
• Command SET-TEST-CALL :BSC=a ,BTS=b ,SECTOR=c ,CDMA=d ,SCI=e ,SCM=f ,
OPTI=g ,DTYPE=h ,TIME=i [,TEST_KEY=j];
a: BSC number (0~11)
b: BTS number (0~47)
c: sector (ALPHA/BETA/GAMMA/DELTA/ZETA/EPSILON)
d: CDMA number (0~11)
e: SLOT CYCLE Index (0~7)
f: SLOT mode (SLOT_M, NON_SLT_M)
g: option (MKV_13K/MKV_8K/LB_13K/LB_8K)
h: Data Rate (VARIABLE/FULL/HALF/QUART/EIGHT )
i: TIME(1~60min)
j: Test Key(1 ~ 100)
• Input/Output