User's Manual Part 2

STAREX-IS BSM Manual
Page:447(877)
Issue:1.
0
SMD-011-PMA210
4.5.6. TRAFFIC PATH TESTING FUNCTION
it is a test enabling to decide if there is presence of failure with designated traffic
path by setting a traffic path for BSC virtual call for a specific MS with the designated
call resources and then measuring PER.. The kinds of virtual call include Markov and
Loop Back., There are 8K and 13K respectively by service option. Call resources that
the user can designate are as follows: Selector Slave Processor, Trunk, and BTS
channel Chip. In one BSC, 100 virtual calls can be set up simultaneously separated
from testing function of virtual call. Once a call is set up, a message type which is
identical to the message type coming from BSC virtual call setup process is displayed.
4.5.6.1. Traffic Path Testing Setup Function
Function to set up a Call for the designated Traffic Path
• Command SET-PATH-CALL : IMSI=a , BSC=b , SMP=c , SLP=d , SLPSLV = e [,TRK =
f], BTS= g ,SECTOR = h ,CDMA = i ,RCP= j , MCPA=k , CHIP=l , SCI=m , SCM=n ,
OPTI=o , DTYPE=p [,TIME=q];
a : IMSI
b : BSC_Number(0~11)
c : SMP_Number(0~4)
d : SLP_Number(0~19)
e : SLP_Slave_Number(0~3)
f : Trunk_Number(0~19)
g : BTS_Number(0~47)
h : Sector_Id(0~5)
i : CDMA_Channel_Number(0~11)
j : RCP_Number(0~9)
k : MCPA_Number(0~9)
l : CHIP_Number(0~1)
m : Slot_Cycle_Index(0~7)
n : Station_Class_Mark(SLOT_M, NON_SLT_M)
o : Service_Option(MKV_13K, MKV_8K, LB_13k, LB_8K)
p : Test_data_Type(VARIABLE, RATE_FULL, RATE_HALF, RATE_QUAR, RATE_EIGHT)
q : TRACE_TIME(1~60min)
• Input/Output