User's Manual Part 2

STAREX-IS BSM Manual

Page:382(877)

Issue:1.

SMD-011-PMA210

4.4.1.4. Processor Restart Command

Function to restart Processors

• Command : RST-PRC[:BSC=a][,BTS=b],RANGE=c,SIDE=d,CLS=e;

a : BSC Number (0~11)

b : BTS Number (0~47)

c : Scope of restart(All the Processors of CCP, PNP,NCP,PCP., etc.)

d : Side to restart (A,B,BOTH)

e : Class (RESTART, REBOOT, FLASH)

RESTART : Restart O/S and receive loading of PLD only.

REBOOT : It executes BOOTER. In case of the processors equipped with Flash

ROM, they check upper level processors and version of each block. If they are

different, they receive loading from the upper level processors. However, if

they are the same, they do not receive loading from the upper level

processors. The processors with no Flash ROM receive loading from the upper

level processors without checking version.

. For reference, Active Side before and after reboot does not change.

FLASH : Delete Flash content of the Processor with Flash ROM equipped and

reboot it to receive loading of all the files from the upper level Processor. For

reference, Active Side before and after Flash Reboot changes.

Input : RST-PRC:BSC=0,BTS=0,RANGE=RCP00,SIDE=A,CLS=RESTART;

Fig. 4.4-4 Result of Processor Restart Command