User's Manual Part 3

STAREX-IS BSM Manual
Page:525(877)
Issue:1.
0
SMD-011-PMA210
4.8.1.4. Display Command for the Present Alarm Status
This is the display command for the information about the presently generated alarm.
If the user would like to see the alarm code only, input nothing or OFF in the Detail
Option.
• Command DIS-ALM-STS[:BSC=a],[BTS=b],[DETAIL=c];
a : BSC Number(0 ~ 11)
b : BTS Number(0 ~ 47)
c : DETAIL Option(ON/OFF)
ON : Alarm Code + Alarm Info. + Alarm Generated Location
OFF: Alarm Code + Corresponding Alarm count(default)
(1) In the case of DETAIL = ON
• Input DIS-ALM-STS:BSC=0,BTS=0,DETAIL=ON;
• Display
Fig. 4.8-4 Display Result of Display Command for the Present Alarm Status
(2) In the case of DETAIL = OFF
• Input DIS-ALM-STS:BSC=0,BTS=0,DETAIL=OFF;
• Display