User's Manual Part 3

STAREX-IS BSM Manual
Page:529(877)
Issue:1.
0
SMD-011-PMA210
4.8.1.8. Display Command for the List of the Suppressed Fault Message
This is the command to display the Fault Source Code List for the suppressed fault
message.
• Command DIS-SUP-FLT:[BSC=a],[BTS=b];
a : BSC Number(0 ~ 11)
b : BTS Number(0 ~ 47)
• Input DIS-SUP-FLT:BSC=0,BTS=0;
• Display
Fig. 4.8-9 Display Result of Display Command for the Suppress Fault Message List
4.8.2. Alarm/Fault Inhibition
4.8.2.1. Inhibition Command for Alarm Message
This is the function to inhibit the alarm message to be displayed on the console
window. If any Alarm Code is not designated it inhibits the entire alarm message
generated in the designated system.
• Command INH-ALM-MSG:[BSC=a],[BTS=b],[AN=c];
a : BSC Number(0 ~ 11)
b : BTS_GRP Number(0 ~ 47)
c : Alarm Code Number(0 ~ 9999)
• Input INH-ALM-MSG:BSC=0,AN=4600;
• Display