User's Manual Part 3

STAREX-IS BSM Manual

Page:531(877)

Issue:1.

SMD-011-PMA210

c : Fault Code Number

• Input INH-FLT-MSG:BSC=0,BTS=0,FN=1000;

• Display

Fig. 4.8-12 Display Result of Inhibition/Allowance for Fault Message Display

4.8.2.4. Alarm Message Suppress Command

This command is used for the following cases: when previously checked alarm(by

the user) is generating and burden BSM; when suppressing the report for the alarm

message from subsystem in order to monitor other important message.

This is the command blocking the message itself for the unnecessary alarm contrary

to the command (INH-ALM-MSG) which inhibits the alarm message to be displayed on

the BSM console window.

• Command SUP-ALM-MSG:[BSC=a],[BTS=b],[SRC_CODE=c];

a : BSC Number(0 ~ 11)

b : BTS Number(0 ~ 47)

c : Alarm Source Code Number(1 ~ 9999)

• Input SUP-ALM-MSG:BSC=0,BTS=0,SRC_CODE=30001;

• Display