User's Manual Part 3

STAREX-IS BSM Manual

Page:532(877)

Issue:1.

SMD-011-PMA210

Fig. 4.8-13 Display Result of the Suppress Alarm Message Command

4.8.2.5. Fault Message Suppress Command

This command is used for the following cases: when previously checked fault

message(by the user) is generating and burden BSM; when suppressing the report for

the fault message from subsystem in order to monitor other important message.

This is the command blocking the message itself for the unnecessary fault message

contrary to the command (INH-FLT-MSG) which inhibits the fault message to be

displayed on the BSM console window.

• Command SUP-FLT-MSG:[BSC=a],[BTS=b],[SRC_CODE=c];

a : BSC Number(0 ~ 11)

b : BTS Number(0 ~ 47)

c : Fault Source Code Number(1 ~ 1000)

• Input SUP-FLT-MSG:BSC=0,BTS=0,SRC_CODE=31001;

• Display

Fig. 4.8-14 Display Result for the Fault Message Suppress Command