User's Manual Part 3

STAREX-IS BSM Manual
Page:535(877)
Issue:1.
0
SMD-011-PMA210
needed any more, it is highly recommended to release the suppress by this command.
If the alarm is not generated in the required situation the suppress matter should be
checked.
• Command REL-ALM-MSG:[BSC=a],[BTS=b],[SRC_CODE=c];
a : BSC Number(0 ~ 11)
b : BTS Number(0 ~ 47)
c : Alarm Source Code Number(1 ~ 9999)
• Input REL-ALM-MSG:BSC=0,BTS=0,SRC_CODE=30001;
• Display
Fig. 4.8-18 Display Result of Release Command for Suppressed Alarm Message
4.8.3.5. Release Command for Suppressed Fault Message
This is the command to release randomly suppressed fault message by the user. If
there were any follow-up measures to the suppressed message and the suppressing is
not needed any more, it is recommended to release the suppress by this command.
• Command REL-FLT-MSG:[BSC=a],[BTS=b],[SRC_CODE=c];
a : BSC Number(0 ~ 11)
b : BTS Number(0 ~ 47)
c : Fault Source Code Number(1 ~ 1000)
• Input REL-FLT-MSG:BSC=0,BTS=0,SRC_CODE=31001;
• Display