LCD TV PLASMA TV OWNER’S MANUAL LCD TV MODELS PLASMA TV MODELS 37LB5D 42LB5D 47LB5D 52LB5D 47LC7DF 50PY3D 60PY3D Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S.
R is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. TruSurround XT TruSurround XT LG TV with this logo displays Full HD(high-definition) 1080p native resolution by receiving and processing a Full HD 1080p signal. LG TV with this logo can play MP3 music from a MP3 player, such as iPOD, and JPEG images from a digital camera through the USB device.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”.
9 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 12 Refer all servicing to qualified service personnel.
CONTENTS SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 MEDIAHOST FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 MEDIAHOST PREPARATION Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . .
TIME SETTING Clock Setting - Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 - Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FEATURE OF THIS TV What is a Plasma TV? Using plasma is the best way to achieve flat panel displays with excellent image quality and large screen sizes that are easily viewable. The Plasma TV can be thought of as a descendant of the neon lamp and or a series of fluorescent lamps. How does it work? Plasma TV is an array of cells, known as pixels, which are comprised of three sub-pixels, corresponding to the colors red, green, and blue.
PREPARATION ACCESSORIES M TE EN U + R HT IG BR EN T ER M TI RA TI O SIMPLIN K FA V TV CH IN PU T PO W TV AU DIO DV M D CA ODE BL E ER IN PU T VC R T- B IGH ST BR M FA V 4 LCD TV PLASMA TV R SIMPLIN K 1.5V 1.5V CH 2 7 5 Owner's Manual TE ER M TI M UT E + IT EX RA TIO L U HT IG BR EN VO 1 EN PREPARATION Ensure that the following accessories are included with your product.
PREPARATION FRONT PANEL INFORMATION PREPARATION ■ Here shown may be somewhat different from your TV. ■ NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). Plasma TV Model 50/60PY3D Remote Control Sensor Program Display Touch Pad . . ENTER Power/Standby Indicator Illuminates red in standby mode. Illuminates white when the set is switched on.
PREPARATION LCD TV Model 37/42/47/52LB5D CH CHANNEL (D,E)Buttons VOL VOLUME (F,G)Buttons ENTER 2 1 ENTER Button MENU MENU Button INPUT INPUT Button 3 /I POWER Button 47LC7DF 1 Intelligent Eye Adjusts picture according to the surrounding conditions. 2 Remote Control Sensor 3 Power/Standby Indicator Illuminates red in standby mode. Illuminates green when the set is switched on.
PREPARATION BACK PANEL INFORMATION ■ Here shown may be somewhat different from your TV.
PREPARATION 1 HDMI/DVI IN Connect a HDMI signal to 1, 2 or 3. Or DVI (VIDEO) signal to the 1, 2 or 3 port with a DVI to HDMI cable. 2 COMPONENT IN Connect a component video/audio device to these jacks. 3 RGB (PC) AUDIO (RGB/DVI) Connect the monitor output from a PC to the appropriate input port. 4 REMOTE CONTROL PORT Connect your wired remote control. 5 RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. 6 ANTENNA/CABLE IN Connect over-the air signals to this jack.
PREPARATION STAND INSTALLATION (Only 37LB5D) PREPARATION 12 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Assemble the product stand with the product as shown. 3 Securely install the 4 bolts provided.
NOT USING THE DESK-TYPE STAND (For Plasma TV) ■ It is applied to when installing only the 60PY3D model as wall-type. PREPARATION When not using the desk-type stand, install the supplied desk-type stand fixture protection rubber caps as shown at the figure. RUBBER ■ It is applied to when installing only the 50/60PY3D model as wall-type.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. PREPARATION Plasma TV Model 1 Hold the CABLE MANAGEMENT with both hands and pull it backward as shown. 45° CABLE MANAGEMENT 14 2 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 3 Install the CABLE MANAGEMENT as shown.
1 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT as shown. PREPARATION LCD TV Model CABLE MANAGEMENT Bundle the cables using the supplied TWISTER HOLDER. 3 ! NOTE G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken.
PREPARATION ATTACHING THE TV TO A WALL ■ Here shown may be somewhat different from your TV. PREPARATION We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.
DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4inches on all four sides from the wall. LCD TV Model 4 inches 4 inches 4 inches CAUTION PREPARATION Plasma TV Model 4 inches G 4 inches 4 inches 4 inches 4 inches Ensure adequate ventilation by following the clearance recommendations.
PREPARATION VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. PREPARATION Plasma TV Model LCD TV Model 600 mm (47/52 inches only: 800 mm) 600 mm USB AV IN 2 VIDEO L/MONO AUDIO R S-VIDEO 400 mm 400 mm ! NOTE G 18 Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide.
ANTENNA OR CABLE CONNECTION ■ Here shown may be somewhat different from your TV. R 1. Antenna (Analog or Digital) PREPARATION AV IN 2 USB Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model. ■ HD RECEIVER SETUP EXTERNAL EQUIPMENT SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
