MUSIC LIST You can use the Music List menu to play MP3 files form a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different. USB Supported music file: *.MP3 Bit rate range 8Kbps ~ 320Kbps • Sampling rate (Sampling Frequency) MPEG1Layer 3 : 8KHz ~ 48KHz • Music Max Length : 999.59 Sec. Screen Components 1 2 MENU ENTER Select U S B.
USB Music Selection and Popup Menu Up to 6 music titles are listed per page. MUSIC LIST USB Device Page 1/1 No Marked DriveA Title Arirang A Free Space 150MB Duration Up Folder Arirang 04:12 Good Bye 05:30 00:00 / 04:16 Up Folder USB Move PopUp Menu CH MUSIC LIST Move Page Q.
Using the Music List Option, play MUSIC LIST USB Device Page 1/1 No Marked DriveA Title Arirang A Free Space 150MB Duration Set audio. Sound Mode Cinema Auto Volume Off Clear Voice ll Off Up Folder Arirang 04:12 Good Bye 05:30 00:00 / 04:16 Up Folder Move PopUp Menu CH Balance Move Page Q.MENU Option MARK Mark 0 L R Exit Exit Show the S o u n d M o d e. 2 Make appropriate adjustments. ■ USB 1 Q.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio. Q.Menu Aspect Ratio F Vivid Sound Mode Standard G Just Scan Set By Program Cinema Zoom Zoom 4:3 English Multi Audio Sleep Timer Off Del/Add/Fav Add Eject USB Eject PICTURE CONTROL Close 1 Q.MENU Select the A s p e c t R a t i o. 2 Select the desired picture format. 3 Q.
16:9 4:3 Adjust the picture horizontally, in a linear proportion to fill the entire screen. Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Just Scan Zoom Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. Just Scan PICTURE CONTROL Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video.
PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily following each step. When you adjust the image to L o w, R e c o m m e n d e d or H i g h, you can see the example of the changes you made. White Level Move 90 50 60 60 0 Set the screen above identical to the Recommended sample below.
i.e) Horizontal Sharpness Complete Select (an) input(s) to apply the settings. Set the screen above identical to the Recommended sample below. DTV TV AV1 AV2 Recommended 50 E • H Sharpness High Component1 Component2 E Low RGB HDMI1 HDMI2 HDMI3 Next Warning: The picture quality may vary according to the different types of signal and inputs. Adjust H o r i z o n t a l S h a r p n e s s.
PICTURE CONTROL ENERGY SAVING It reduces the TV’s power consumption. The default factory setting complies with the E n e r g y S t a r requirements and is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the P i c t u r e M o d e. P i c t u r e M o d e -C i n e m a”.
PRESET PICTURE SETTINGS (PICTURE MODE) There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually. Q.Menu Aspect Ratio F F Picture Mode G G Standard Sound Mode Vivid Standard Off Caption English Multi Audio CH 16:9 16:9 Vivid Vivid Sleep Timer Off Del/Add/Fav Add Eject USB Eject Cinema Expert2 Expert1 Game Sport Close Q.MENU Select P i c t u r e M o d e.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT-USER MODE Adjust the picture appearance to suit your preference and viewing situations. PICTURE Move Enter Aspect Ratio : 16:9 Picture Wizard Energy Saving : Intelligent Sensor 90 • Brightness 50 • Sharpness 60 • Color 60 • Tint 0 • Contrast 80 E R E E • Contrast E Picture Mode : Standard Enter G E PICTURE CONTROL 1 MENU Select P I C T U R E. ENTER Select P i c t u r e M o d e.
PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video seeing differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Reset” function for each Picture Mode.
PICTURE CONTROL EXPERT PICTURE CONTROL E x p e r t 1 and E x p e r t 2 provide more categories which users can set as By segmenting categories, they see fit, offering the optimal picture quality for users. This may also be used be a professional to help optimize the TV performance in the environment the TV is in.
Color Temperature Dynamic Contrast Dynamic Color Noise Reduction Gamma Black Level Color Gamut Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish. ■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. ■ Adjusts screen colors so that they look livelier, richer and clearer.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move Enter PICTURE Move E E • Contrast • Brightness • H Sharpness • V Sharpness • Color • Tint 90 50 60 60 60 0 i R G • Contrast 90 • Brightness 50 • H Sharpness 60 • V Sharpness 60 Resetting video configuration... • Color 60 • Tint 0 R • Expert Control • Reset Screen (RGB-PC) 1 PICTURE CONTROL MENU Select P I C T U R E. ENTER Select R e s e t.
IMAGE STICKING MINIMIZATION (ISM) METHOD A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost image.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. Q.Menu Aspect Ratio F Sound Mode G Standard Music F Standard G Multi Audio English Sleep Timer Off Del/Add/Fav Add Eject USB Eject Game Sport SOUND & LANGUAGE CONTROL Close 1 Q.MENU Select S o u n d M o d e.
SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Move : Off Clear Voice II : On +3 Balance Sound Mode Enter 0 L R : Standard AUDIO : Off Clear Voice II : On Sound Mode MENU 2 ENTER • Infinte Sound: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 ENTER Treble 50 Bass 50 Off Close Select S o u n d M o d e. Select S t a n d a r d, M u s i c, C i n e m a, S p o r t, or G a m e. Select T r e b l e or B a s s.
SOUND & LANGUAGE CONTROL INFINITE SOUND Select this option to sound realistic. AUDIO Move Auto Volume : Off Clear Voice II : On +3 Balance Sound Mode Enter 0 L R : Standard AUDIO : Off Clear Voice II : On 0 Sound Mode SOUND & LANGUAGE CONTROL 1 MENU ENTER • Infinite Sound: Off Off 50 • Treble 50 On • Bass 50 • Bass 50 : On MENU 80 • Reset TV Speaker : On Select A U D I O. Select I n f i n i t e S o u n d. Select O n or O f f.
BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Move : Off Clear Voice II : On +3 0 L R : Standard AUDIO : Off Clear Voice II : On Sound Mode • Infinte Sound: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 MENU Select A U D I O. ENTER Select B a l a n c e. 2 3 ENTER Make appropriate adjustments. 4 BACK MENU Return to the previous menu.
SOUND & LANGUAGE CONTROL TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. In A V, C o m p o n e n t, R G B and H D M I with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system or a SRS System, turn off the TV’s internal speakers.
AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move Auto Volume : Off Clear Voice II : On +3 Balance Sound Mode AUDIO Enter 0 : Standard • Infinte Sound: Off L R : Off Clear Voice II : On 50 • Treble 50 • Bass 50 • Bass 50 2 ENTER Select A U D I O. Select R e s e t. 3 ENTER Initialize the adjusted value. L R • Reset TV Speaker : On SOUND & LANGUAGE CONTROL 1 MENU 0 Sound Mode : Standard i Resetting audio configuration...
SOUND & LANGUAGE CONTROL STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Q.Menu Aspect Ratio F Vivid Sound Mode Standard F F Multi Audio English English G Off Sleep Timer Del/Add/Fav Add Eject USB Eject SOUND & LANGUAGE CONTROL Close Analog TV 1 Q.
AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. 2 ENTER 3 ENTER OPTION Language Input Label Input Label Move Enter Audio SIMPLINK : On SIMPLINK Key Lock : Off Key Lock : Off Caption : Off Caption : Off ISM Method : Normal ISM Method : Normal Set ID :1 Set ID :1 Initial Setting : Store Demo Initial Setting : Store Demo Select O P T I O N. Select L a n g u a g e.
SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. Move Enter Language ENTER 3 ENTER 4 ENTER SIMPLINK Key Lock : Off Key Lock : Off Caption : Off Caption : Off ISM Method : Normal ISM Method : Normal Set ID :1 Set ID :1 Initial Setting : Store Demo Initial Setting : Store Demo Select O P T I O N. Select L a n g u a g e. Select M e n u. Select your desired language.
CAPTION MODE Analog Broadcasting System Captions Captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
SOUND & LANGUAGE CONTROL Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On.
Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is turned On.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
Manual Clock Setup If the current time setting is wrong, set the clock manually. TIME Move Enter Clock TIME Move Enter F Clock Manual G Off Time : Off Off Time : Off Year On Time : Off On Time : Off Month 2 Date 21 Hour 2 AM Sleep Timer : Off Sleep Timer : Off 2008 Minute 10 Eastern Time Zone Daylight Saving Auto Close 1 MENU Select T I M E. G ENTER Select C l o c k. ENTER Select M a n u a l.
TIME SETTING AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The O f f T i m e function overrides the O n T i m e function if they are both set to the same time. The TV must be in standby mode for the O n T i m e to work. If you do not press any button within 2 hours after the TV turns on with the O n T i m e function, the TV will automatically revert to standby mode.
SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. Q.Menu Aspect Ratio 16:9 16:9 F Vivid Sound Mode Standard Off Caption English Multi Audio Sleep Timer CH G Picture Mode F Off Del/Add/Fav Add Eject USB Eject G Close 1 Select S l e e p T i m e r. ■ 2 Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0, or 2 4 0 minutes. 3 Q.MENU Return to TV viewing.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Lock System 1 MENU 2 1 2 4 5 6 7 8 9 Enter : Off LOCK Move Lock System : On Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Enter Off On Select L O C K. 3 Input the password. 0 3 4 ENTER Select O n or O f f.
PARENTAL CONTROL / RATINGS Set Password Change the password by inputting a new password twice. LOCK Move Lock System 1 2 1 2 4 5 6 7 8 3 9 : Off LOCK Lock System Set Password Set Password Block Channel Block Channel TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block Select L O C K. Input the password. PARENTAL CONTROL / RATING 96 Select S e t p a s s w o r d.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Lock System Enter : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block 1 MENU 2 1 2 4 5 6 7 8 3 9 ENTER Ch.Change Move CH Move Page Previous Block/Unblock Select L O C K. Input the password. 0 3 4 ENTER Select a channel to block or unblock. 5 Block or unblock a channel.
PARENTAL CONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) - For USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
TV Rating Children - For USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
PARENTAL CONTROL / RATINGS TV Rating General - For USA only Based on the ratings, blocks certain TV programs that you and your family do not want to view.
TV Rating English - For CANADA only Selecting English rating system. LOCK Move Lock System Enter : Off LOCK Move Lock System Enter Blocking off : Permits all : Off programs Set Password Set Password Block Channel Block Channel TV Rating-English TV Rating-English TV Rating-French TV Rating-French Downloadable Rating Downloadable Rating Input Block Input Block E C C8+ G PG 14+ 18+ Blocking Off 1 MENU 2 1 2 3 4 5 6 7 8 9 ENTER Select L O C K. ■ Input the password.
PARENTAL CONTROL / RATINGS TV Rating French - For CANADA only Selecting Canadian French rating system.
DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Region5 Rating data.
PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input.
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries. *This feature is not available for all models.
The audio function does not work. Press the VOL or VOLUME button. Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ ■ Picture OK & No sound No output from one of the speakers ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS MODEL 50PK550 (50PK550-UA) 60PK550 (60PK550-UA) 42PJ350 (42PJ350-UB) Dimensions (Width x Height x Depth) With stand 46.1 x 30.9 x 12.1 inches 1171.4 x 786.2 x 309.7 mm 54.8 x 36 x 14.4 inches 1392 x 915 x 367 mm 38.8 x 27.1 x 10.2 inches 988 x 688.5 x 260 mm Without stand 46.1 x 28.5 x 2.1 inches 1171.4 x 724.4 x 55.3 mm 54.8 x 33.5 x 2.1 inches 1392 x 852 x 55.3 mm 38.8 x 24.3 x 2.1 inches 988 x 617.8 x 55.3 mm Weight With stand Without stand 68.3 lbs / 31 kg 63.
APPENDIX MODEL 50PK350 (50PK350-UA) With stand 38.8 x 27.2 x 10.2 inches 988 x 692.7 x 260 mm 46.1 x 30.9 x 12.1 inches 1171.4 x 786.2 x 309.7 mm 46.1 x 30.7 x 12.1 inches 1171.4 x 781.8 x 309.7 mm Without stand 38.8 x 24.4 x 2.1 inches 988 x 621.8 x 55.3 mm 46.1 x 28.5 x 2.1 inches 1171.4 x 724.4 x 55.3 mm 46.1 x 28.3 x 2.1 inches 1171.4 x 720.9 x 55.3 mm Weight With stand Without stand 47.6 lbs / 21.6 kg 44.0 lbs / 20 kg 66.1 lbs / 30kg 60.8 lbs / 27.6 kg 68.3 lbs / 31 kg 63.0 lbs / 28.
IR CODES (This feature is not available for all models.) 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
APPENDIX (Hexa) Code Function Note 08 POWER Remote control Button (Power On/Off) D6 45 Q.
EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. ■ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software.
APPENDIX RS-232C Configurations Either cable below can be used. 7-Wire Configuration (Serial female-female NULL modem cable) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DTR DSR RTS CTS Set ID Use this function to specify a TV ID number. Refer to ‘Real Data Mapping’.
Command Reference List COMMAND1 COMMAND2 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select k x k k k k k k k k k k a b c d e f g h i j k l COMMAND1 COMMAND2 21. Channel Tuning m a DATA (Hexadecimal) 00 ~ 01 (G p.118) (G p.118) 00 ~ 01 00 ~ 01 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 01 COMMAND1 COMMAND2 13. Remote Control Lock Mode 14. Treble 15. Bass 16.
APPENDIX 01. Power (Command: k a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge.
12. OSD Select (Command: k l) 18. ISM Method (Command: j p) To select OSD (On Screen Display) on/off. To avoid having a fixed image remain on screen. Transmission [k][l][ ][Set ID][ ][Data][Cr] Transmission [ j ][p][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 02: Orbiter 04: White Wash 08: Normal 20: Color Wash Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] 13.
APPENDIX Data 05: 7 Main/Sub Picture 0 Main 1 Sub 6 Two/One Part Channel 0 Two 1 One Using Physical Channel 4 3 2 1 0 Step 0 Use x 0 0 0 0 1 No Use x 0 0 0 1 x 0 0 1 0 x 0 0 1 1 x 0 1 0 0 x 0 1 0 1 x 0 1 1 0 x 0 1 1 1 NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved ... Reserved 5 The table above lists the binary code which must be converted to Hexadecimal before sending.
APPENDIX 119
120
