User's Manual

50
ENG
ENGLISH
CUSTOMIZING SETTINGS
Setting Description
Tile Mode Setting
Tile Mode You can display the image on multiple sets and view it in a larger size. To use
the Tile Mode on multiple sets with same signal.
Auto Config. This option optimizes the screen when you connect the set to a new computer
or change to a different mode. If you are not satisfied with the adjustment, you
can manually change the "Position" or "Size".
Position You can set the position.
Size You can set the size.
Natural
The image is omitted by the distance between the screens to be naturally
shown.
Reset Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
Portrait mode Rotate OSD clockwise (90°,270°)
Option
90° Rotate OSD clockwise 90°.
270° Rotate OSD clockwise 270°.
90° 270°
Fan Setting
Mode This option indicates the monitor's internal temperature and controls the fan.



Hysteresis The difference in temperature between when the fan is switched on and when
it is off.
Set Temperature Set the temperature at which the fan is switched on.
Current
Temperature
Current temperature inside the set.
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address and home
page.
NOTE
We recommend that you use the Auto mode to prevent any malfunctions resulting from
incorrect fan settings.

Move
OK
OPTION
           

Move
OK
OPTION
           