OWNER’S MANUAL LED LCD TV / LCD TV PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. P/NO : SAC34134203 (1001-REV03) www.lge.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. 6 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories specified by the manufacturer. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
SAFETY INSTRUCTIONS 4 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS WARNING / CAUTION ............................2 SAFETY INSTRUCTIONS ........................3 CONTENTS ......................................................6 FEATURE OF THIS TV ............................. 8 PREPARATION Accessories...........................................................10 Optional Extras ..................................................... 11 Front Panel Information .................................... 12 Back Panel Information.....................................
NETCAST Netcast Menu.................................................... 123 YOUTUBE........................................................... 124 PICASA............................................................... 126 PICTURE CONTROL Picture Size (Aspect Ratio) Control............ 128 Picture Wizard................................................... 130 ᰚ Energy Saving ............................................ 132 Preset Picture Settings (Picture Mode).....
FEATURE OF THIS TV ᯫ Some of these features are not available on all models. High-definition television. Highresolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080p, 1080i, and 720p resolutions. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories.
AV Mode is three preset picture and audio settings. It allows the viewer to quickly switch between common settings. It includes Cinema, Sports, and Game Modes. View videos and photos and listen to music on your TV through USB 2.0 (‘videos’ dependent on model). Automatically enhances and amplifies the sound of human voice frequency range to help keep dialogue audible when background noise swells. IMPORTANT INFORMATION TO PREVENT “IMAGE BURN / BURN-IN” ON YOUR TV SCREEN ᯫ ᯫ ᯫ When a fixed image (e.g.
PREPARATION PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. PREPARATION 1.5V 1.
32/42/46/52/60LD550, 47/55LD650 PREPARATION (For 32/42LD550) x8 (M4 x 20) Screws for stand assembly (Refer to P.22) Screw for stand fixing (Refer to P.32) Protection Cover (Refer to P.23) Power Cord 42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500 (47/55LE8500) (55LE5500, 55LE7500) x8 x4 (M4 x 20) x4 x8 (M4 x 24) (M4 x 16) (M4 x 16) Screws for stand assembly (Refer to P.
PREPARATION FRONT PANEL INFORMATION ᯫ Image shown may differ from your TV. 50/6O K750 PREPARATION Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. SPEAKER Intelligent Sensor Adjusts picture according to the surrounding conditions Touch Button You can operate the button just by touching the button lightly with your finger.
BACK PANEL INFORMATION ᯫ Image shown may differ from your TV.
2 3 LAN Network connection for Netflix, Yahoo! TV Widgets, etc (for USA). Also used for video, photo and music files on a local network. HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio. Doesn’t support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included). RGB IN (PC) Analog PC Connection. Uses a D-sub 15 pin cable (VGA cable). AUDIO IN (RGB/DVI) 0.32 cm (1/8 inch) headphone jack for analog PC audio input.
PREPARATION STAND INSTRUCTIONS (For 50/60PK750,50/60PK950) ᯫ Image shown may differ from your TV. PREPARATION INSTALLATION (For 50PK750, 50PK950) 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. STAND BODY 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. M5 x 14 3 Assemble the TV as shown. 4 Install the 4 screws into the holes shown.
1 PREPARATION DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 50PK750 2 Remove the screws that hold the stand on. M4 x 28 3 60PK750 M4 x 30 Detach the stand from TV. PROTECTION COVER After removing the stand, install the included PROTECTION COVER over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click. When installing the wall mounting bracket, use the PROTECTION COVER.
PREPARATION STAND INSTRUCTIONS (For 32/42/46/52/60LD550, 47/55LD650) ᯫ Image shown may differ from your TV. PREPARATION INSTALLATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. AC IN CABLE MANAGEMENT 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. STAND BODY M4 x 20 STAND BASE AC IN CABLE MANAGEMENT 3 Assemble the TV as shown. 4 Install the 4 screws into the holes shown.
1 2 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Remove the screws that hold the stand on. AC IN CABLE MANAGEMENT PREPARATION DETACHMENT AC IN CABLE MANAGEMENT AC IN 3 Detach the stand from TV. CABLE MANAGEMENT PROTECTION COVER After removing the stand, install the included PROTECTION COVER over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click.
PREPARATION VESA WALL MOUNTING PREPARATION Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.
PREPARATION ! NOTE ŹScrew length needed depends on the wall mount used. For further information, refer to the instructions included with the mount. ŹStandard dimensions for wall mount kits are shown in the table. ŹWhen purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. ŹDo not use screws longer than the standard dimension, as they may cause damage to the inside to the TV.
PREPARATION CABLE MANAGEMENT ᯫ Image shown may differ from your TV. PREPARATION Plasma TV 1 After connecting the cables as necessary, install the CABLE HOLDER as shown and bundle the cables. In case of the LAN cable, install as shown to reduce the electromagnetic wave.
PREPARATION ATTACHING THE TV TO A DESK (For 32/42LD550) ᯫ Image shown may differ from your TV. PREPARATION The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Stand 1-Screw (provided as parts of the product) Desk WARNING ŹTo prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND ᯫ We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.
PREPARATION ᯫ ᯫ To prevent damage do not connect to the power outlet until all connections are made between the devices. Image shown may differ from your TV. PREPARATION ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP ᯫ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ᯫ Image shown may differ from your TV. HD RECEIVER SETUP This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device. 1.
HDMI Connection 1. How to connect LAN 1 (SERVICE 3 (RGB/DVI) OPTICAL DIGITAL 2 AUDIO IN 1 No separate audio connection is necessary. HDMI supports both audio and video. WIRELESS CONTROL ᯫ Turn on the digital set-top box. (Refer to the owner’s manual for the digital settop box.) ᯫ Select the HDMI1, HDMI2, HDMI3, or HDMI4 input source on the TV using the INPUT button on the remote control. 2 Y PB PR L 1 VIDEO 1 2.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection EXTERNAL EQUIPMENT SETUP 2 Connect the DVI output of the digital set-top box to the HDMI/DVI IN 1, 2, 3, or 4* jack on the TV. (RGB/DVI) OPTICAL DIGITAL 2 AUDIO IN 1 ꔡ WIRELESS CONTROL 2 Y PB ᯫ Select the HDMI1, HDMI2, HDMI3, or HDMI4* input source on the TV using the INPUT button on the remote control. ! NOTE ŹA DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio connection is necessary.
DVD SETUP Component Connection 1. How to connect Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO 1, 2, or 3* jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). 2 Connect the audio outputs of the DVD to the COMPONENT IN AUDIO 1, 2, or 3* jacks on the TV. Y PB RS-232C IN (SERVICE ONLY) /DVI IN 3 2 AUDIO IN 1 S L VIDEO L(MONO) AUDIO R AUDIO OUT COMPONENT IN Turn on the DVD player, insert a DVD.
EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection 1. How to connect (SERVICE ONLY) /DVI IN 3 (RGB/DVI) OPTICAL DIGITAL 2 AUDIO IN 1 S L 2. How to use VIDEO L(MONO) AUDIO R AUDIO OUT 2 Y PB PR L AUDIO VIDEO ᯫ ᯫ ᯫ R 1 Turn on the DVD player, insert a DVD. Select the AV1 or AV2 input source on the TV using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. COMPONENT IN Connect the AUDIO/VIDEO jacks between TV and DVD.
HDMI Connection 1. How to connect RS-232C IN RGB IN (PC) Connect the HDMI output of the DVD to the HDMI/DVI IN 1, 2, 3 or 4 jack on the TV. LAN 3 AUDIO IN 2 No separate audio connection is necessary. HDMI supports both audio and video. 1 ꔡ WIRELESS CONTROL 2 Y PB 2. How to use 1 ᯫ PR L R 1 VIDEO ᯫ VIDEO L(MONO) AUDIO R AUDIO OUT Select the HDMI1, HDMI2, HDMI3, or HDMI4 input source on the TV using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP VCR SETUP Antenna Connection 1. How to connect EXTERNAL EQUIPMENT SETUP 42 1 2 Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN socket on the TV. Connect the antenna cable to the RF antenna in socket of the VCR. ANTENNA/ CABLE IN 1 ANT OUT S-VIDEO ANT IN OUTPUT SWITCH 2 VIDEO L Wall Jack 2. How to use ᯫ ᯫ Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
Composite (RCA) Connection 1. How to connect Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) EXTERNAL EQUIPMENT SETUP 1 RS-232C IN RGB IN (PC) (SERVICE ONLY) /DVI IN 3 2. How to use AUDIO IN SS OL 2 Y P B PR L R 1 AUDIO VIDEO 1 ! NOTE ŹIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect Video Game Set ᯫ ᯫ Select the AV1 or AV2 input source on the TV using the INPUT button on the remote control. Operate the corresponding external equipment. IN 4 2. How to use 1 AV IN 2 44 L USB IN 1 VIDEO /P VIDEO L(MONO) AUDIO R H EXTERNAL EQUIPMENT SETUP Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors.
2. How to use USB IN 1 After connecting the USB IN jack, you use the USB function. (Źp.93) /P H ᯫ or Me ryK o m e y EXTERNAL EQUIPMENT SETUP Connect the USB device to the USB IN 1 or 2 jack on the side of TV. L(MONO) AUDIO R 1 IN 4 1.
EXTERNAL EQUIPMENT SETUP HEADPHONE SETUP (FOR LED LCD TV/LCD TV) You can listen to the sound through the headphone. EXTERNAL EQUIPMENT SETUP 46 1 Plug the headphone into the headphone socket. 2 To adjust the headphone volume, press the VOL +/- button. If you press the MUTE button, the sound from the headphone is switched off. ! NOTE ŹAUDIO menu options are disabled when connecting a headphone. ŹWhen changing AV MODE with a headphone connected, the change is applied to video but not to audio.
AUDIO OUT CONNECTION Send the TV’s audio to external audio equipment via the Audio Output port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). ( 1. How to connect ) ( ) 3 (RGB/DVI) OPTICAL DIGITAL Connect one end of the optical cable to the TV port of OPTICAL DIGITAL AUDIO OUT.
EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT WIRELESS CONNECTION (OPTIONAL EXTRAS) LG TVs with a Wireless Control port support the LG Wireless Media Box, which is sold separately. When you connect the wireless ready dongle (included with the media box) to the TV, external devices can be connected to the LG Wireless Media Box and video and audio will be sent to the TV wirelessly.
PC SETUP This TV provides Plug and Play capability, meaning that a PC adjusts automatically to the TV's settings. VGA (D-Sub 15 Pin) Connection RS-232C IN RG BIN (PC) LAN 3 1 Connect the VGA output of the PC to the RGB IN (PC) jack on the TV. VIDEO L(MONO) AUDIO R AUDIO IN ꔡ 1 IRELESS ONTROL AUDIO OUT 2 Y P PR B L R 1 2 Connect PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. VIDEO 2. How to use 2 ᯫ ᯫ 1 Turn on the PC and the TV.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect LAN EXTERNAL EQUIPMENT SETUP 1 Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. 2. How to use ᯫ ᯫ (RG /BDVI) OPTICAL DIGITAL 2 AUDIO IN 1 WIRELESS CONTROL VIDEO L(MONO) AU AUDIO OUT 2 Y P B PR L 1 VIDEO 1 2 Turn on the PC and the TV. Select the HDMI1, HDMI2, HDMI3, or HDMI4* input source on the TV using the INPUT button on the remote control.
! NOTE ŹTo get the the best picture quality, adjust the PC graphics card to 1920x1080. ŹDepending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. ŹAvoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. ŹThe synchronization input form for Horizontal and Vertical frequencies is separate.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution EXTERNAL EQUIPMENT SETUP You can choose the resolution in RGB-PC mode. The Position, Phase, and Size can also be adjusted. You can choose this option only when the PC resolution is set to 1024X768, 1280X768 or 1360X768.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Returns Position, Size, and Phase to the default initial settings. This feature operates only in RGB-PC mode.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment or if text is shaking, adjust the picture phase manually. This feature operates only in RGB-PC mode. EXTERNAL EQUIPMENT SETUP PICTURE ᯒ 0RYH ᯙ (QWHU SCREEN Resolution ؒ &RORU ؒ 7LQW R * ؒ &RORU 7HPS W C ؒ $GYDQFHG &RQWURO ؒ 3LFWXUH 5HVHW ۻ Auto Config.
NETWORK SETUP Wired Network Connection This TV can be connected to a local area network (LAN) via the LAN port. After making the physical connection, the TV needs to be set up for network communication.
EXTERNAL EQUIPMENT SETUP Wired Network Setup If wired and wireless networks are both available, wired is the preferred method. After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For detail information, contact your internet provider or router manual. If you already set the Network Setting 1(7:25.
! NOTE ŹA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this TV or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this TV may not be allowed to connect when a PC is already connected.
EXTERNAL EQUIPMENT SETUP Wireless Network IN2 B S U IN1 B S U IN4 /P R H AUDIO EO ID V NO O L(M ) EXTERNAL EQUIPMENT SETUP The LG Wireless LAN for Broadband/DLNA Adaptor, which is sold separately, allows the TV to connect to a wireless lan network. The network configuration and connection method may vary depending on the equipment in use and the network environment. Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings.
Wireless Network Setup Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network. ᯒ 0RYH ᯙ (QWHU ؒ 1HWZRUN 6HWWLQJ :LUHG ؒ 1HWZRUN 6WDWXV ,QWHUQHW LV FRQQHFWHG 1HWZRUN 7\SH :LUHG QHWZRUN LV UHFRPPHQGHG ؒ /HJDO 1RWLFH ؒ (61 6HOHFWLQJ WKH ZLUHOHVV QHWZRUN VHWWLQJ W\SH 3UHYLRXV VHWWLQJ YDOXH H[LVWV 'R \RX ZDQW WR FRQQHFW ZLWK WKH SUHYLRXV VHWWLQJ" 6HOHFW WKH ZLUHOHVV QHWZRUN VHWWLQJ W\SH 6HWWLQJ IURP WKH $3 OLVW 6LPSOH VHWWLQJ 3%& 0RGH
EXTERNAL EQUIPMENT SETUP When a security code is already set PIN (Personal Identification Number) If you want to connect the AP (Access Point) or router with PIN, use this feature. 6HOHFWLQJ $3 EXTERNAL EQUIPMENT SETUP &RQQHFWLQJ ZLWK 3,1 PRGH 6HOHFW $3 \RX ZDQW WR FRQQHFW PDJH 1/1 ,37,0( ,QVHUW 3,1 QXPEHU DW WKH $3 ZHESDJH DQG SUHVV ؋&RQQHFW، EXWWRQ LSWLPH 3,1 18%0(5 &RQQHFW ASW $FFHVV 3RLQW 6HDUFK 1HWZRUN )RU PRUH LQIRUPDWLRQ FKHFN WKH $3 PDQXDO ᯙ 1H[W ᯕ &RQQHFWLQJ ZLWK 3,1 P
AD-hoc Mode This is the method of communicating directly with the machine to communicate without AP. This is the same as connecting two PCs with a cross cable. 6HWWLQJ $G KRF QHWZRUN 6HWWLQJ $G KRF QHWZRUN 6HOHFW WKH ZLUHOHVV QHWZRUN VHWWLQJ W\SH ,QVHUW WKH VHWWLQJ LQIRUPDWLRQ LQWR WKH GHYLFH )HDWXUHV XVLQJ H[LWLQJ QHWZRUN FDQ EH XQDYDLODEOH 'R \RX 6HWWLQJ IURP WKH $3 OLVW ZDQW WR FKDQJH QHWZRUN FRQQHFWLRQ" (QWHU 6HWWLQJ $G KRF QHWZRUN ᰿ ([LW &DQFHO ᯕ &KDQJLQJ WKH VHWWLQJ LQIRUPDWLRQ ᯙ 1H[W
EXTERNAL EQUIPMENT SETUP Network Status 1HWZRUN 6HWWLQJ 1(7:25. ᯒ 0RYH ᯙ (QWHU 79 ؒ 1HWZRUN 6HWWLQJ :LUHG ؒ 1HWZRUN 6WDWXV ,QWHUQHW LV FRQQHFWHG 1HWZRUN FRQQHFWLQJ EXTERNAL EQUIPMENT SETUP ؒ /HJDO 1RWLFH ؒ (61 6HWWLQJ 7HVW &ORVH 6HOHFW WKH ZLUHOHVV QHWZRUN VHWWLQJ W\SH 1HWZRUN 6HWWLQJ 6HOHFW WKH ZLUHOHVV QHWZRUN VHWWLQJ W\SH 6HOHFW WKH ,3 VHWWLQJ PRGH ,3 0RGH ܁,3 $XWR 6HWWLQJ ۽ ᯘ,3 $GGUHVV ᯘ6XEQHW 0DVN ᯘ*DWHZD\
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. The remote control may differ from the images below. POWER Turns the TV on from standby or off to standby. T H LIG LIGHT EA D O M ENERG Y V INP T U TV ENERGY SAVING INS V AG 4IHG C B A 3EDF AV MODE 5LKJ 6NMO INPUT 7RQPS 8TUV 9ZYXW T IS L 0 FLASHBK TV RK A M L O V RA TIO EL D ETE H C P A G E — (DASH) UTE M ENU M ENU .
WATCHING TV / CHANNEL CONTROL VOLUME UP/DOWN T H LIG FAV EA D O M ENERG Y V Adjusts the volume. Set up desired favorite channels list. Źp.79 INP T U TV MARK INS V AG Select the input to apply the Picture Wizard settings. Źp.131 1 2 WATCHING TV / CHANNEL CONTROL 4IHG C B A 5LKJ 3EDF Use to mark or unmark a photo/music/movie. 6NMO RATIO 7RQPS 8TUV 9ZYXW T IS L 0 Źp.105, 110, 116 CHAR/NUM Changes the aspect ratio. Źp.128 Shifts the Character or Number for internet service.
Simple Remote Control (For 42/47/55LE7500, 47/55LE8500) POWER POWER TV/INPUT CH VOL TV/INPUT VOLUME UP/ DOWN MUTE Rotates through inputs. Also switches the TV on from standby. Źp.83 Adjusts the volume. Switches the sound on or off. Źp.66 Changes the channel. NUMBER button FLASHBK — (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASHBK Tunes to the last channel viewed.
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV 1 First, connect power cord correctly. At this moment, the TV switches to standby mode. ᯫ In standby mode to turn TV on, press the / I, INPUT, CH (ᰜ or ᰝ) button on the TV or press the , INPUT, CH (ᰜ or ᰝ), Number (0-9) button on the remote control. WATCHING TV / CHANNEL CONTROL 2 Select the viewing source by using the INPUT button on the remote control. 3 When finished using the TV, press the POWER button on the remote control.
INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. ᯫ ᯫ Step 1. Selecting Language 1 :(/&20( Select Menu Language. 7KDQN \RX IRU FKRRVLQJ /* 6WHS /DQJXDJH 2 (QJOLVK ENTER (VSDñol )UDQ«DLV 䭢⍴㮻 WATCHING TV / CHANNEL CONTROL ᯫ Default selection is “Home Use”.
WATCHING TV / CHANNEL CONTROL Step 3. Power Indicator (For LED LCD TV) 1 6WHS 3RZHU ,QGLFDWRU 6WDQGE\ /LJKW Select On or Off. ܁2II ۽ 2 ᰙ 3UHYLRXV ᯙ 1H[W WATCHING TV / CHANNEL CONTROL ᯫ ENTER This function is disable in “Step2. Mode Setting - Store Demo”. Step 4. Time Zone 1 Select Time Zone option. 6WHS 7LPH =RQH 7LPH =RQH ( ܁DVWHUQ ۽ 'D\OLJKW 6DYLQJ 2 Select Daylight Saving option. Auto ᰙ 3UHYLRXV ᯙ 1H[W 3 ENTER Step 5.
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. 1 2 3 ENU M Display each menu. ENTER Select a menu item. 4 Return to TV viewing.
WATCHING TV / CHANNEL CONTROL 1(7:25. ᯒ 0RYH ᯙ (QWHU ؒ 1HWZRUN 6HWWLQJ 1RQH ؒ 1HWZRUN 6WDWXV 1RW FRQQHFWHG ؒ /HJDO 1RWLFH 1(7:25. ؒ (61 WATCHING TV / CHANNEL CONTROL ᯒ 0RYH ,QSXW /LVW 79 86% 86% $9 $9 &RPSRQHQW &RPSRQHQW 5*% 3& +'0, +'0, +'0, +'0, ,1387 ᯕ ,QSXW /DEHO 0< 0(',$ 0< 0(',$ 0RYLH /LVW 3KRWR /LVW 0XVLF /LVW 3UHVV (QWHU ᯙ WR VHH PRYLHV IURP WKH 86% ᯕ 2SWLRQ ᰙ ([LW *$0( *$0( -803 +2/( ,1 21( :+$&.
QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. ܁$VSHFW 5DWLR ۽ ᯙ turns off automatically. ᰃ Del/Add: Select channel you want to add or delete. ᰔ Caption: Select on or off. ᯲ USB Device: Select “Eject” in order to eject a USB device. ᰙ ([LW 1 2 Q.MENU Display each menu. ENTER Make appropriate adjustments.
WATCHING TV / CHANNEL CONTROL CUSTOMER SUPPORT Software Update You can update the TV with the latest software to enhance the product operation and/or add new features. You can update the software by connecting the TV directly to the software update server. The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG Electronics Service Center then update your TV.
Picture Test/Sound Test This function is a customer support function that can execute picture and sound tests. ۳ 6RIWZDUH 8SGDWH ۳ 6RXQG 7HVW " 'R \RX KDYH D SUREOHP LQ WKLV WHVW VFUHHQ" ۳ 3URGXFW 6HUYLFH ,QIR ۳ 1HWZRUN 7HVW Yes 1R &ORVH ۳ 6RIWZDUH 8SGDWH ۳ 3LFWXUH 7HVW ᯡ 6RXQG 7HVW " 'R \RX KDYH D VRXQG SUREOHP LQ WKLV VFUHHQ" ۳ 3URGXFW 6HUYLFH ,QIR ۳ 1HWZRUN 7HVW &ORVH 1 ENU M 2 RED Select Customer Support. ENTER Select Picture Test or Sound Test. ENTER Select Yes.
WATCHING TV / CHANNEL CONTROL Product/Service Info. This function shows support and product information. Customer Service Center can differ by country. 1 ENU M WATCHING TV / CHANNEL CONTROL 2 3 BACK IT X E RED Select Customer Support. ENTER Select Product/Service Info.. You can check the various product/Service infomation based on your model. Return to the previous menu. Return to TV viewing. Network Test Check the newtwork status.
SIMPLE MANUAL You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. 1 ENU M Select Simple Manual. Select the part of the manual you would like to see. RED BLUE 3 EXIT Go to the Index page. Play the Simple Manual automatically or manually. Return to TV viewing.
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Auto Tuning memorizes only the channels available at the time.
Add/Delete Channel (Manual Tuning) When selecting DTV or Cable DTV input signal in Manual Tuning, you can view the on-screen signal strength monitor to see the quality of the signal being received. &+$11(/ ᯒ 0RYH ᯙ (QWHU ؒ 0DQXDO 7XQLQJ ؒ $XWR 7XQLQJ ᯙ ᯐ ؒ &KDQQHO (GLW ؒ 0DQXDO 7XQLQJ ؒ &KDQQHO (GLW ᯒ 0RYH ᯙ (QWHU ' ܁79 ۽ 6HOHFW FKDQQHO W\SH DQG 5) FKDQQHO QXPEHU &KDQQHO 2 '79 ؒ 6LJQDO 6WUHQJWK ؒ 6LJQDO 4XDOLW\ 'HOHWH &ORVH 1 2 ENU M Select
WATCHING TV / CHANNEL CONTROL Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using CHهنbutton during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select it in the Channel Edit menu.
FAVORITE CHANNEL SETUP Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select all the in-between channels. 1 ᰙ ([LW )DYRULWH /LVW P A G E CH DTV DTV 4IHG C B A 3EDF 5LKJ 6NMO 7RQPS 8TUV 9ZYXW Select your desired channel. 2 AR M K Select your desired favorite channel group from A to D. A FV CHAR M U /N ᯙ ᯱ 3 YELLOW BLUE 4 ᯕ &K 5HJ ᯕ &K (GLW Go to the “CHANNEL menu - Channel Edit”.
WATCHING TV / CHANNEL CONTROL CHANNEL LIST You can check which channels are stored in the memory by displaying the channel list. &KDQQHO /LVW ᰙ ([LW DTV ᯢ DTV ᯙ ᯱ This padlock is displayed when the channel is locked with parental control. WATCHING TV / CHANNEL CONTROL ᯕ &K (GLW Displaying Channel List 1 Display the Channel List. LIST BLUE Tune to the “CHANNEL menu - Channel Edit”. Selecting a channel in the channel list 1 2 Select a channel.
CHANNEL INFORMATION ᯦ '79 &11 %ULHI ,QIR 7LWOH 7HVW ᯐ &K &KDQJH ۽1H[W ᯙ :DWFK $0 $0 0XOWLOLQJXDO ᯿ &DSWLRQ ᰇ L ᯢ 79 3* ' / 6 9 ᯱ Displaying Channel Information 1 INFO 2 Show the current channel program Information on the screen. Show a previous or next channel’s pro gram information 3 IT X E Return to TV viewing. ᯕ 8S ᯕ 'RZQ WATCHING TV / CHANNEL CONTROL 1R LQIRUPDWLRQ 6DUDK %UDGOH\ 6WHYH *UD\ DQG %UHQGRQ 3RQJLD SUHVHQW WKH ODWHVW LQ IDVKLRQ WK
WATCHING TV / CHANNEL CONTROL CHANNEL BRIEF INFORMATION Brief Info shows the present screen information. 1 2 ENTER Shows the current channel’s brief info screen. ENTER Return to TV viewing. WATCHING TV / CHANNEL CONTROL 6 3 ᯦ '79 1 4 &11 2 6XQ )HE $0 %ULHI ,QIR 7LWOH 7HVW $0 ᱏ 5 $0 0XOWLOLQJXDO ᯿ &DSWLRQ ᰇ L ᯢ 79 3* ' / 6 9 1H[W $0 1HZV Multilingual : The program contains two or more audio services. Use the Q.
INPUT LIST Only these input signals which are connected to a TV can be activated and selected. ,QSXW /LVW ᯒ 0RYH 86% 86% $9 $9 &RPSRQHQW &RPSRQHQW 5*% 3& +'0, +'0, +'0, +'0, INPUT ENTER ᯫ ᯫ ᯫ ᯫ ᯫ ᯫ ᯫ Disconnected inputs are inactive (grayed out) ᰙ ([LW Select the desired input source. ᯫ You can also select the desired input source in the INPUT menu. When new external device is connected, this popup menu is displayed automatically.
WATCHING TV / CHANNEL CONTROL INPUT LABEL This indicates which device is connected to which input port. ie) Change the input label using Blue button ,QSXW /LVW ,QSXW /DEHO WATCHING TV / CHANNEL CONTROL ܁ $9 ܁ ۽ &RPSRQHQW ܁ ۽ &RPSRQHQW ܁ ۽ 5*% 3& ܁ ۽ 9&5 79 86% 86% $9 $9 &RPSRQHQW &RPSRQHQW 5*% 3& +'0, +'0, +'0, +'0, &ORVH ᯕ ,QSXW /DEHO 1 INPUT BLUE 3 K C A B IT X E ᯙ (QWHU ۽ ᯝ 2 84 $9 ᯒ 0RYH Select the desired input source.
RESET TO FACTORY DEFAULT (INITIAL SETTING) This function resets the TV to factory default and erases all stored channels. 237,21 ᯒ 0RYH ᯙ (QWHU ؒ /DQJXDJH ؒ &DSWLRQ ᯒ 0RYH ᯙ (QWHU ؒ /DQJXDJH 2II ؒ &DSWLRQ 2II ؒ 3RZHU ,QGLFDWRU ᯙ ᯐ ؒ ,QLWLDO 6HWWLQJ +RPH 8VH ؒ ,QLWLDO 6HWWLQJ ؒ 0RGH 6HWWLQJ $OO XVHU VHWWLQJV DQG FKDQQHO VHWWLQJV ZLOO EH UHVHW 6WLOO FRQWLQXH" +RPH 8VH Yes 1 2 ENU M Select OPTION. ᯫ ENTER Select Initial Setting. ᯫ ENTER Select Yes.
WATCHING TV / CHANNEL CONTROL MODE SETTING Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best picture in your home environment. 237,21 ᯒ 0RYH ᯙ (QWHU ؒ /DQJXDJH ؒ &DSWLRQ ᯒ 0RYH ᯙ (QWHU ؒ /DQJXDJH 2II ؒ &DSWLRQ ؒ 3RZHU ,QGLFDWRU WATCHING TV / CHANNEL CONTROL ؒ ,QLWLDO 6HWWLQJ +RPH 8VH ᯰ ᯙ ؒ 0RGH 6HWWLQJ +RPH 8VH 6HOHFW >+RPH 8VH@ ZKHQ VHWWLQJ 79 XS LQ KRPH
DEMO MODE Displays a slide show to explain the various feature of this TV. 237,21 ᯒ 0RYH ᯙ (QWHU ؒ /DQJXDJH ؒ &DSWLRQ ᯒ 0RYH ᯙ (QWHU ؒ /DQJXDJH 2II ؒ &DSWLRQ ؒ 3RZHU ,QGLFDWRU ؒ 3RZHU ,QGLFDWRU ؒ ,QLWLDO 6HWWLQJ +RPH 8VH ᯰ ᯙ ؒ 0RGH 6HWWLQJ 2II L 6HOHFWLQJ WKH HQYLURQPHQW &KRRVH WKH VHWWLQJ PRGH \RX ZDQW 6HOHFW >6WRUH 'HPR@ IRU LQ VWRUH GVSOD\ )RU XVH 6WRUH 'HPRLQ KRPH VHOHFW >+RPH 8VH@ +RPH 8VH 6WRUH 'HPR ؒ 'HPR 0RGH 2II &ORVH 1 2 3 ENU M Select OPTION.
WATCHING TV / CHANNEL CONTROL AV MODE AV Mode toggles through preset Video and Audio settings. WATCHING TV / CHANNEL CONTROL 1 AV MODE 2 Off &LQHPD &LQHPD Game Sport Press the V AM DEbutton repeatedly to O select the desired source. ᯫ ENTER ᯫ ᯫ ᯫ ᯫ ᯫ 88 If you select “Cin ema / Cin ema” in AV mode, Cin ema / Cin ema will be selected both for “PICTURE menu - Picture Mode” and “AUDIO menu - Sound Mode” respectively.
GAME Allows you to enjoy the games installed on the TV. *$0( -803 +2/( ,1 21( :+$&. $ 02/( 6$9,1* &5<67$/ ,19$'(5 85*(17 6859,9$/ 68'2.8 &22.,1* %85*(5 *$0( 1 2 3 ENU M Select GAME. ENTER Select the desired game. ENTER Enter the selected game mode. 4 EXIT Return to TV viewing.
WATCHING TV / CHANNEL CONTROL SIMPLINK SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the logo are fully supported. SIMPLINK can be turned on and off in the user menus. 1 ᯙ (QWHU ᰙ ([LW WATCHING TV / CHANNEL CONTROL 2 :DWFK 79 Select On.
SIMPLINK Functions ᯫ ᯫ Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device: Enables you to select one of the AV devices connected to the TV. Disc playback: Control connected AV devices by pressing the ᰜᰝ !, ENTER, ᰦ, ᰧ, ᰨ, ᰪ and ᰩ buttons. ᯫ Power off all devices: When you power off the TV, all connected devices are turned off. ᯫ Switch audio-out: Offers an easy way to switch audio-out.
MY MY MEDIA MEDIA ENTRY MODE The My Media menu will open automatically when you insert a USB drive. My Media can also be accessed by choosing My Media in the user menu. After choosing the desired type of media, choose a device to open files from. The options are: USB device, CIFS (Windows Sharing), or DLNA. *CIFS: This feature is not available for all models.
CONNECTION METHOD USB Connection IN 4 USB IN 1 USB IN 2 1 Connect the USB device to the USB IN jack on the side of TV. Memory Key ŹOnly a USB storage device is recognizable. ŹConnecting a USB storage device through a USB hub is not supported. ŹA USB storage device which uses its own driver may not be recognized. ŹThe recognition speed of a USB storage device may depend on each device. ŹPlease do not turn off the TV or unplug the USB device when the connected USB storage device is working.
MY MEDIA CIFS (Common Internet File System) *This feature is not available for all models. Share folder (CIFS: Common Internet File System) Setup ᯫ The method of setting the shared folder may be different by the OS environment. Case 1 (Windows XP) Select the folder you wish to share and then click Sharing. 2 Check Share this folder and click Apply.
Case 2 (For Windows Vista) 1 Choose the folder that you want to share. Then, right-click and click Share. 2 Choose the folder that you want to share. Right-click and click Properties. Click Advanced Sharing on Sharing tab. Check Share this folder and click Permission. Add Everyone and check Full Control - Allow. 3 Check File sharing-On, Public folder sharingOn, and Password protected sharing-Off. MY MEDIA Add the Everyone and click Share.
MY MEDIA Viewing Files on the Network You can view the photos, movies or listen to music files from folders shared on the network. 1 Set a share folder (CIFS: Common Internet File System) on the PC (Refer to P.94-95). 2 Connect the LAN port of the Modem or Router to the LAN port on the TV. i.
DLNA About DLNA MY MEDIA This TV is a DLNA Certified digital media product that can display and play movie, photo and music content from your DLNA Certified network device and DLNA server. The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics, computing industry and mobile device companies. Digital Living provides consumers with easy sharing of digital media through a wired or wireless network in the home.
MY MEDIA Installing Nero MediaHome 4 Essentials Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows. If you are already using DLNA server software on your PC, Nero MediaHome is not required. Nero MediaHome is not required for Windows 7 since it has a built-in DLNA server.
Start up your computer, and insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive. An installation wizard will walk you through the quick and uncomplicated installation process. 2 Close all Microsoft Windows programs and exit any anti-virus software that may be running. 3 Insert the Nero MediaHome 4 Essentials CD-ROM into your computer’s CD-ROM drive. 4 Click Nero MediaHome 4 Essentials. The installation is prepared and the installation wizard appears.
MY MEDIA Sharing files and folders After installing Nero MediaHome, you must add folders you wish to share. MY MEDIA 1 Double-click the Nero MediaHome 4 Essentials icon on the desktop. 2 Click Network icon on the left and define your network name in the Network name field. The Network name you enter will be recognized by your TV. 3 Click Shares icon on the left. 4 Click Local Folders tab on the Shared screen. 5 Click Add icon to open the Browse Folder window.
Playing back shared contents You can display and play movie, photo and music content stored on your computer or other DLNA media servers. 1 Start the server on your computer or other device that connected on your home network. 2 3 Select MY MEDIA. ENT ER Select Movie List, Photo List or Music List. ENT ER Select the DLNA. Depending on the media server, this TV may need to get the permission from the server. If you want to re-scan available media server, press blue color button.