User's Manual

8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Connecting the Speakers
- Only on some models.
1
Connect an input signal cable to use before
installing the speakers. Use a cable tie to
organize and fix the cables.
3
After installing your speakers, use holders and
cable ties to organize the speaker cables.
2
Use the screws to secure the stand on the rear
side of the product as shown in the diagram.
y
Connect the speaker terminals noting the
correct polarity.
Connecting the stand
- Only on some models.
1
Place a soft cloth on the table and put the
product with the screen facing downward.
NOTE
2
Mount the speaker by using a screw as shown
in the following. Then connect the speaker
cable.