User's Manual
55
EXTERNAL EQUIPMENT SETUP
Gateway
DTV
Gateway
DNS
Internet
DNS
DTV
Gateway
Gateway
This feature requires an always-on
broadband internet connection.
You do not need to connect to a PC
to use this function.
If the Network Setting is not working,
check your network conditions. Check
the LAN cable and make sure your
router has DHCP turned on if you
wish to use the Auto Setting.
If the Network Setting is not com-
pleted, network may not operate nor-
mally.
IP Auto Setting: Select it if there is a
DHCP server on the local area net-
work (LAN) via wired connection, the
TV will automatically be allocated an
IP address. If you’re using a broad-
band router or broadband modem
that has a DHCP (Dynamic Host
Configuration Protocol) server func-
tion. The IP address will automati-
cally be determined.
IP Manual Setting: Select it if there is
no DHCP server on the network and
you want to set the IP address manu-
ally.
Wired Network Setup
1
MENU
Select NETWORK.
2
ENTER
Select Network Type.
3
ENTER
Select Wired.
4
ENTER
Select Network Setting.
5
ENTER
Select IP Auto Setting or IP
Manual Setting.
6
1 2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
0
9
WXYZ
When Selecting IP Manual
Setting:
Input the internet protocol.
7
Select a desired menu option
(Setting, Test, Close).
IP Auto Setting
IP Manual Setting
If wired and wireless networks are both available, use Wired. Because the connected devices connect
directly to the network and are not subject to radio frequency interference.
After making the physical connection, a small number of home networks may require the TV network
setting to be adjusted.
For detail information, contact your internet provider or router manual.