User's Manual

ManualsBrandsLG Electronics USA ManualsElectronicsNetwork Blu-Ray Home Theater

Available resolution according to the resolution setting

Notes:

• Depending on your display, some of the resolution settings may result in

the picture disappearing or an abnormal picture appearing. In this case,

press HOME then RESOLUTION repeatedly until the picture re-appear.

• This player supports simultaneous output of all video out jacks. The

resolution of the HDMI output will not be the same as the resolution

output on the component video output.

HDMI OUT connection

• For the 480i resolution setting, real output resolution of HDMI OUT will

change to 480p.

• If you select a resolution manually and then connect the HDMI jack to

TV and your TV does not accept it, the resolution setting is set to [Auto].

• If you select a resolution that your TV does not accept, the warning

message will appear. After resolution change, if you cannot see the

screen, please wait 20 seconds and the resolution will automatically

revert back to the previous resolution.

• The 1080p video output frame rate may be automatically set to either

24Hz or 60Hz depending both on the capability and preference of the

connected TV and based on the native video frame rate of the content

on the BD-ROM disc.

COMPONENT VIDEO OUT connection

• For the 1080p resolution setting with unprotected media, real output

resolution of COMPONENT VIDEO OUT will change to 1080i.

• For the 720p, 1080i, 1080p resolution setting with protected media, real

output resolution of COMPONENT VIDEO OUT will change to 480i or

480p depending on the connectivity of HDMI cable.

• BD, DVD or Netflix video stream could prevent up-scaling on analog

output.

VIDEO OUT connection

The resolution of the MONITOR OUTPUT jack is always outputted at 480i

resolution.

• When the non-copy protected media is playing back

Video Output HDMI OUT COMPONENT VIDEO OUT

Resolution Setting

480i 480p 480i

480p 480p 480p

720p 720p 720p

1080i 1080i 1080i

1080p / 24Hz 1080p / 24Hz 480i 1080i

1080p / 60Hz 1080p / 60Hz 480i 1080i

• When the copy protected media is playing back

Video Output HDMI OUT COMPONENT VIDEO OUT

Resolution Setting

480i 480p 480i

480p 480p 480p

720p 720p 480i 480p

1080i 1080i 480i 480p

1080p / 24Hz 1080p / 24Hz 480i 480p

1080p / 60Hz 1080p / 60Hz 480i 480p

HDMI connected HDMI disconnected

HB954PA-AD.954SA-AP.BUSALL_ENG 12/18/08 5:31 PM Page 17

Summary of content (2 pages)

PAGE 1
HB954PA-AD.954SA-AP.BUSALL_ENG 12/18/08 5:31 PM Page 17 Available resolution according to the resolution setting HDMI OUT connection • When the non-copy protected media is playing back • For the 480i resolution setting, real output resolution of HDMI OUT will change to 480p. Video Output HDMI OUT COMPONENT VIDEO OUT HDMI connected HDMI disconnected Resolution Setting • If you select a resolution that your TV does not accept, the warning message will appear.
PAGE 2
HB954PA-AD.954SA-AP.BUSALL_ENG 12/18/08 5:31 PM Page 18 Internet connection This player can be connected to a local area network (LAN) via the LAN port on the rear panel. After making the physical connection the player needs to be set up for network communication. This is done from the [Setup] menu — see “[NETWORK] Menu” on page 26 for detailed instructions.