SEAT MIB ENTRY RADIO OPERATION MANUAL 2012.
PRECAUTION It is essential to follow the precautions below when using the system, both in the interest of safety and to prevent material damage. You must always comply with the laws of the country in which you are travelling. Precautions when operating the system – Operate the controls (on the dash or near the steering wheel) and read the information on the screen only when road conditions allow. – Set the volume to a reasonable level so that outside noise can be heard.
FCC Warning 1. Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. 2. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules.
GENERAL DISCRIPTION Introduction Your vehicle’s multimedia system performs the following functions: – FM/AM/RDS Radio, – CD(MP3) Playback, – USB, SD(SDHC) Playback, – Auxiliary audio source output Radio Function The multimedia system can be used to listen to FM (frequency modulation), and AM (amplitude modulation) radio stations.
GENERAL DISCRIPTION Hands-free Phone Function The hands-free Bluetooth® phone system makes the following functions possible without having to handle your phone : – send/receive/suspend a call – transfer the list of contacts from the phone memory – access the call logs for calls which have come through the system – dial emergency numbers.
KEY FUNCTION Mute Sound Insert CD Eject CD Bluetooth Select Band Select Media Source Select Car Information Sound Control Main Menu - PUSH : Power ON/OFF -Turning Right / Left : Volume Control * USB, AUX – External Connection Insert SD - PUSH : Radio/Media Scan -Turning Right / Left : Searching Wavelength/Media Files
RADIO MODE ① ② ③ ⑧ ⑨ ⑦ ④ ⑤ ① BAND SELECT Select the wavelength (FM or AM) required by pressing wavelength. ② MENU Enter the whole system’s setup menu of audio. ③ STATION It shows the station list. ④ TP Receiving RDS Traffic Program ON/OFF. ⑥ ⑤ SETUP Enter the radio setup menu. Refer to the page 7. ⑥ MANUAL Tuning frequency by manual mode. ⑦ SELECT THE PRESET This operation mode allows you to recall on demand those stations which already stored.
RADIO MODE Radio Settings Display the settings menu by pressing “SETUP”. You can activate or deactivate functions below. (the setting menu varies depending on the wavelength).
RADIO MODE * RDS Some FM radio stations broadcast text information relating to the program being listened to (the name of a track, for example). Note : This information is only available on some radio stations. * TA (Traffic Announcement) When this function is activated, your audio system makes it possible to automatically search for and listen to traffic information when they are broadcast from certain FM radio stations.
MEDIA MODE - CD/MP3/USB/SD/BT AUDIO ① ② ③ ④ ⑤ ⑥ ① MEDIA Select the media devices (CD, SD, USB, BT AUDIO) required by pressing source in connection. But when listening to the radio, select your audio source by pressing “MEDIA” Key. The system starts playing the last audio track played. Note : Any change to the audio source which is made when the system is not active will not be automatically taken into account. * In case of playing mp3 file in SD ② MENU Enter the whole system’s setup menu of audio.
MEDIA MODE - CD/MP3/USB/SD/BT AUDIO ⑦ ⑧ ⑨ ⑩ ⑦ ⑧ TRACK UP/DOWN, FF/REW Push Short This mode allows title to be searched manually by scanning the selected file or track. Push Long Also, Press and hold to fast forward or rewind. Playback resumes when the button is released. ⑨ DISPLAY Shows the kind of media device (CD,SD,USB, BT AUDIO) and title’s information in playing. (In case of CD-DA, it shows track No.) ⑩ REPEAT / PAUSE / SHUFFLE SETTINGS This function allows you to repeat one song or all songs.
MEDIA MODE – EXTERNAL AUX Connection Connect the jack of your portable audio player or external device to the AUX jack input. Use No indication of the name of the artist or the track is displayed on the system’s screen. Note : you cannot select a track directly from your audio system. To select a track, you must do so directly via your portable audio player, when the vehicle is stationary.
MEDIA MODE Media Settings Display the settings menu by pressing “SETUP” in playing media device. You can activate or deactivate below functions.
MEDIA MODE * Audio Formats The media audio source formats include MP3, WMA only. * Folder & TAG Information If you connect a USB key, all the folders will be at the same level on the tree structure. Depending on the type of digital portable audio player, you can refine your selection by using folders or files or by searching the following criteria : – Artist, – Album, – Genre, – Playlist, – All tracks.
SOUND CONTROL ① ② ③ ⑦ ④ ⑤ ⑥ ① EQUALIZER SETTINGS Tap “+” or “-” to adjust the Bass, Mid or Treble. After setting Bass, Mid or Treble, tap “BACK”. If you tap “RESET”, the setting becomes default. ② MENU Enter the whole system’s setup menu of audio. ③ RADIO or MEDIA Display the currently playing file or radio channel information. * Equalizer Setting ④ MUTE Muting the sound. ⑤ SETUP Enter the sound setup menu. Refer to the page 15. ⑥ RESET Reset the sound setting to default.
SOUND CONTROL Sound Settings Display the settings menu by pressing “SETUP”. You can control below functions.
SYSTEM SETTINGS * To access the system parameters : Push “MENU” Key -> “Setup” or tap “MENU” -> “Setup” in each media or radio mode. ① Display switched off You can switch off the screen. ② Screen Setup Set the display brightness, clock showing or acoustic touchscreen feedback. ③ Sound Setup Refer to the page 15 “Sound Settings”.
SYSTEM SETTINGS ⑤ Bluetooth Setup Refer to the section of Bluetooth ⑥ Factory Setup This function allows you to initialize various settings to the default settings. – All : Initializes all the settings to the default settings. – Phone / Bluetooth : Initializes all the settings related with phone, Bluetooth. – System : Initializes all the settings related with system. – Sound/Media/Radio : Initializes all the settings related with Sound/Media/Radio.
MIB Entry SE370/1 Bluetooth Manual Searching Pairing Connection Outgoing call Incoming call BT audio(A2DP) Phonebook
Searching Press hard key ‘PHONE’ and click on ‘Find telephone’ Or press hard key ‘SETUP’ -> Bluetooth setup -> Find devices -> Find List of searched Bluetooth devices will be listed as shown in the below diagram
Searching Select a Bluetooth device that is to be connected Profile can be chosen in this here Choose ‘Connect all profiles’ which enables both HFP and A2DP * HFP : Hands Free Profile , A2DP : Advanced Audio Distribution Profile
Pairing Passkey Pop Up will be displayed as below Check the passkey of both MU and device, then click on ‘OK’
Connection Bluetooth Device is connected if the below scene is displayed (Refer to the top left corner) The connected device can be checked in ‘My devices’ menu following the below steps.
Outgoing call Contacts : List of contact info in the device is displayed. DIAL : Make outgoing call by the displayed keypad. Callstack : List of call history is displayed.
Incoming call Below Pop up will be displayed when there is incoming call on connected device On Pop up : Button on the left side is Accept / in the middle is Mute / on the right side is Reject Call is accepted and on going as shown in the right diagram once ‘Accept’ is pressed
BT audio(A2DP) BT Audio menu is entered by pressing hard key ‘MEDIA’ (after device is connected, including A2DP profile) Media source can be changed by ‘MEDIA’ soft key on the top left corner PREVIOUS REPEAT NEXT START/STOP RANDOM
Phonebook Phonebook download will start automatically if there is phonebook exist in the connected device Pop up will be displayed once download is completed as shown in the below diagram.