LSX300-4DM_OM (Zenith) 7/16/07 2:30 PM Page 1 Installation and Operating Guide | Warranty (Draft Ver. 0.5) Model Number | LSX300 | Coupon-Eligible Converter Box As an ENERGY STAR® Partner, LG has determined that this product or product models meets the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark. © Copyright 2007, LG Electronics U.S.A., Inc. For service/ support Call: Toll Free Number 1-800-243-0000 (http://us.lgservice.
LSX300-4DM_OM (Zenith) 7/16/07 2:30 PM Introduction CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
7/16/07 2:30 PM IMPORTANT SAFETY INSTRUCTIONS Please read and observe all warnings and instructions in this owner’s manual. And those marked on the product. Retain this booklet for future reference. PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water.
LSX300-4DM_OM (Zenith) 7/16/07 2:30 PM Page 4 Introduction Front Panel a a POWER indicator Lights up red (standby mode) or blue (active mode). This indicator will blink when remote signal is received. b Remote Control Sensor Receives signals from the Remote Control. b c d c u/U (Channel Down/Up) Scans up or down through memorized channels. d POWER Turns the unit on or off. Connection Panel Overview a b c a ANTENNA IN (FROM ANT.) Connect to digital signal source; over-the-air antenna.
LSX300-4DM_OM (Zenith) 7/16/07 2:30 PM Remote Control Accesses or closes main menu. POWER SLEEP INFO SAP RATIO EXIT Removes all on-screen displays and returns to TV viewing from any menu. Arrow Buttons (U / u / I / i) MENU GUIDE Introduction MENU TV POWER SIGNAL Page 5 Selects options in a menu. (Select) EXIT Selects highlighted menu function. Completes the channel number input and promptly tunes to selected channel.
LSX300-4DM_OM (Zenith) 7/16/07 2:30 PM Connections with TV and over-the-air antenna Installation 1. Connect the antenna to the “ANTENNA IN” jack on this unit using a coaxial RF cable (N). 2. Connect the “ANTENNA OUT” jack on this unit to the “Antenna In” jack on your TV using a coaxial RF cable (R). Your TV must be tuned to the selected RF channel (3 or 4 channel) to display the picture.
LSX300-4DM_OM (Zenith) 7/16/07 2:30 PM Page 7 Install Guide Menu Overview The Install Guide is a convenient way for you to customize the settings of this unit. When the unit is turned on for the first time after connecting the power supply, Install Guide is displayed on the screen automatically. By using the menu, you can make various adjustments to items such as picture and sound.
LSX300-4DM_OM (Zenith) 7/16/07 2:30 PM Setup Menu Features Page 8 Manual Tuning This feature manually adds or deletes channels. 1. Select “Manual Tuning” option then press (Select) or i. 2. Select a channel to add or delete. 3. Press (Select) to confirm your selection. Note A password is required to gain access to Auto Tuning and Manual Tuning menu if the Lock System option is set to “On” (See page 10).
LSX300-4DM_OM (Zenith) 7/16/07 2:30 PM Setup Menu Features (Continued) Favorite Channel You can create your own Favorite List. 1. Select “Favorite Channel” option then press (Select) or i. 2. Select a channel then press (Select) to add the channel to the Favorite List. Tip Page 9 Note The changed aspect ratio is applied only to current channel. Tip While watching TV, you can change the aspect ratio using RATIO button on the Remote Control. Language Select a language for the audio and menu.
LSX300-4DM_OM (Zenith) 7/16/07 2:30 PM Option Menu Features (Continued) Auto Off Sets a time the TV will turn off. If you do not press any button within the preset time, this feature automatically turns the unit off. (Default: 4 hours) If you select “Off”, Auto Off is not active. Tip you can select a time for the Auto Off using SLEEP button on the Remote Control. Setup Audio Output Select the appropriate audio output mode of the unit depending on your TV connection.
7/16/07 2:30 PM Page 11 TV Rating-General TV Rating-Children Blocks TV programs that you or your family may not wish to watch, based on the rating scheme set. Prevents children from watching certain children’s TV programs according to the ratings limit set. This rating applies only to TV programs for children. Unless you block TV programs intended for mature audiences in the TV Rating – General menu, your children could view those programs. 1.
LSX300-4DM_OM (Zenith) 7/16/07 2:30 PM Operating Channel Selection You can select channels as described below. • Use Number (0-9) and – (dash) buttons to select a channel directly. • Press BACK to return to the previous channel you viewed. • Use CH u/U on the Remote Control or u/U on the front panel to select a channel through the channels in memory. Page 12 Auto Off This unit will be automatically turned off, in case of no button input for a preset time. You can set a time using the SLEEP button.
7/16/07 2:30 PM Page 13 Simple Guide Program Information Display Use the Simple Guide to see the informations for a current or next program easily and conveniently. The Information Display appears if you press the INFO button on the remote control while viewing a program. To Display or Exit the Simple Guide Press the GUIDE button on your remote control. The Program Information shows items listed below.
LSX300-4DM_OM (Zenith) 7/16/07 2:30 PM Troubleshooting Specifications No power. General • Plug the power cord into the wall outlet securely. Fragmented picture and unclear sound. • Check your antenna input, location, and signal strength. No picture. • Select the Auto Tuning or Manual Scan functions if you have not already done so. • Check to make sure all the cables are installed correctly and that the proper source is selected on your TV. For example, CH 3, CH 4, Video 1 or Video 2.
LSX300-4DM_OM (Zenith) 7/16/07 2:30 PM Page 15 Reference Notes 15
LSX300-4DM_OM (Zenith) 7/16/07 2:30 PM Page 16 Zenith Electronics, Inc. Limited Warranty - USA This Zenith Electronics product, will be repaired or replaced, at Zenith’s option, if it proves to be defective in material or workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product.