User's Manual

MFL68488801
Please read this manual
carefully before using the product.
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products shall be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
※ Check out below address for more information.
9SD751TVDA
WIRELESS HIGHBAY SENSOR
OWNER’S MANUAL
Specifications
Disposal of your old appliance
Model 9SD751TVDA
Sensor
Frequency
Wireless range
Operating conditions
Temperature
Humidity
Weight
Dimensions (WHD)
installation height
Operating voltage
Current consumption
FCC ID
Passive Infrared(PIR) Sensor
2405~2480 MHz, 16 ch
Line of sight 98 ft (30 m)
For Indoor use only
Operating : -4 to 122℉ (-20 to 50℃)
Storage : -22 to 185℉ (-30 to 80℃)
0 to 85 % Rh
1.1 oz (30 g)
2.6”
x 2.1” x 1.0” (75 mm x 54 mm x 25 mm)
Typical 20 ft (6 m), up to 40 ft (13 m)
3.3 V DC (from LG LED lighting)
Max.80 mA
BEJ9SD751TVDA
http://www.lg.com/global/sustainability/environment/
Dimensions Safety Precautions
Features
- 1 - - 2 -
54 mm
17 mm
54
mm
75 mm
25
mm
11 mm
- Wireless Highbay sensor detects motion and control
LG LED Highbay efficiently.
Simple installation just by pluging a sensor Easy adjustment using
a rotary dial and a switch Wireless communication at 2.4 GHz Possible
to be used for LG Lighting control system.
Applications
High ceiling spaces Like Warehouse, Storage areas, etc.
WARNING
Violation of warnings may lead to serious injury or death.
CAUTION
Violation of precautions may lead to light injury or product damage.
• Turn power off
before install the
product.
•
Do not wipe the surface
with inflammables such
as alcohol, benzene
and acetone.
• Do not
disassemble
the product.
• Turn power off
before install
the product.
• Do not install
nearby inflammable
material
• Do not install in areas
that have risks of
flooding Do not store
in a humid area.
• Do not install nearby
air conditioners and
heaters.