User's Guide

Specifications
Model ACM74838701
Motion Sensor
Frequency
Wireless range
Operating conditions
Temperature
Humidity
Weight
Dimensions (WHD)
Light sensing range
Target Light level
installation height
Passive Infrared(PIR) Sensor
2405.0~2480.0 MHz
Line of sight 98 ft (30 m)
For Indoor use only
Operating : -4 to 122℉ (-20 to 50℃)
Storage : -22 to 185℉ (-30 to 80℃)
0 to 85 % Rh
1.1 oz (30 g)
Wireless Module : 0.9” x 1.4” x 0.3”
(22 mm x 36 mm x 8 mm)
Sensor module : 19.7” x 07.9”
(50 mm x 20 mm)
1 ~ 1000 lx
Default : 600 lx
Software configurable : 1~1000 lx
Up to 11.5 ft (3.5 m)
Operating voltage
Current consumption
FCC ID
3.3 V DC (from LG LED lighting)
Max.80 mA
BEJACM74838701
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products shall be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
※ Check out below address for more information.
Disposal of your old appliance
http://www.lg.com/global/sustainability/environment/
Please read this manual carefully
before using the product.
WIRELESS SENSOR
OWNER’S MANUAL
- 1 -
Features
- Simple installation just by pluging a sensor
- Easy adjustment using a rotary dial and a switch
- Wireless communication at 2.4GHz
- Possible to be used for Wireless Lighting control system.
Applications
High ceiling spaces such as warehouse, storage areas, etc.
- 2 -
Safety Precautions
WARNING
Violation of warnings may lead to serious injury or death.
CAUTION
Violation of precautions may lead to light injury or product
damage.
• Turn power off
before installing
the product.
•
Do not wipe the surface
with inflammables such
as alcohol, benzene
and acetone.
• Do not
disassemble or
deform. Do not
give shock on.
• Do not expose to
direct sunlight or
moisture.
• Do not install
nearby inflammable
materials.
• Do not install in areas
that have risks of
flooding Do not store
in a humid area.
• Do not install nearby
air conditioners and
heating appliance.