User's Manual Part 1

BX4170

The Battery

The phone comes with a rechargeable battery. Keep the battery

charged while not in use in order to maximize talk and standby

time. The battery charge level is shown at the top of the LCD

screen.

Installing the Battery

To install the battery, insert the battery into the opening on the

back of the phone. Put the battery cover on the battery and

push it slightly upwards.

Removing the Battery

Turn the power off. While pressing the PUSH button on the back

of the phone, pull the battery cover downwards and remove it.

Then remove the battery by pressing the upper area of it.

Charging the Battery

The desktop charger has a charging slot that accommodates the

phone with the battery attached or the battery by itself.

Warning! Use only the desktop charger provided with the

phone. Using any (desktop) charger other than the one

included with the BX4170 may damage your phone or battery.

1. Plug the charger into a wall outlet. The phone must be

charged from a 120V AC power source.

2. Insert the phone with an installed battery, or the battery by

itself, into the charging slot. The red light indicates the

battery is charging and the green light indicates the battery

is fully charged. The charge time varies depending upon

the battery level. The maximum charge time for a fully

discharged battery is 3 hours.

NOTE: It is important to fully charge the battery before initial use of

the phone.

Getting Y

our Phone Star

ted

*BX4170-(Eng).QXD 04/4/30 7:28 PM Page 16