Order Number : GETEC-C1-10-110 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-052 Page 1 / 1 APPENDIX G : USER’S MANUAL EUT Type: DLP PROJECTOR FCC ID.
OWNER’S MANUAL DLP PROJECTOR Please read this manual carefully before operating your set and retain it for future reference. BX503 BX403B www.lg.
DLP PROJECTOR Warning - Class B (b) For a Class B Digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contents Contents Safety Instructions .............................................4 Names of parts Main Body .................................................................7 Connecting Part ......................................................7 Control Panel ............................................................8 Remote Control .......................................................9 Installing Batteries ...................................................9 Projector Status Indicators ............
Safety Instructions Safety Instructions Please take note of the safety instructions to prevent any potential accident or misuse of the projector. ᰶ Safety Instructions are given in two forms as detailed below. WARNING : The violation of this instruction may cause serious injuries and even death. NOTES : The violation of this instruction may cause injuries or damage to the projector. ᰶ After reading this manual, keep it in the place that you can access easily.
Safety Instructions Power WARNING Never touch the power plug with a wet hand. Do not plug-in too many items into one power outlet. Prevent dust from collecting on the power plug pins or outlet. This may cause an electric shock hazard! It may result in overheating of the outlet and create a fire hazard! This may cause a fire hazard! Power NOTES Hold the plug firmly when unplugging. If you pull the cord, it may be damaged.
Safety Instructions Using WARNING If the projector is in a room that experiences a gas leak, do not touch the projector. Always open the lens door or remove the lens cap when the projector lamp is on. It can cause a fire or a burn by a spark. Using NOTES Do not place heavy objects on top of projector. Take care not to impact the lens particularly when moving the projector. Do not touch the lens of the projector. It is delicate and easily damaged.
Names of parts Names of parts Main Body * The projector is manufactured using high-precision technology. You may, however, see on the Projector screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the manufacturing process and does not always indicate a malfunction. Control panel Focus ring Power button Zoom ring Foot adjusting button Front remote control sensor Control Panel MENU Button Selects or closes menus.
Names of parts Connecting Part VIDEO IN RGB IN-2 RGB IN-1 RGB OUT USB(SVC only) HDMI IN RS-232C Rear remote control sensor RJ45 AC IN 9 Kensington Security System Connector (Refer to page 14)
Names of parts Remote Control ⢮❺#ᴮ㍦ 㛾ᬞㄖ#ᴮ㍦ 㛾ᬞ#ᶞ⢿#ᴮ㍦ 㖞➸#∑㬉 㛿⠢ ⠯ᣏ⇊ㆇ#ᴮ㍦ ጞ#ᴮ㍦ /#ġ2Ģ2˘2˚ ᴮ㍦ ᳇#⤚⢿#ᴮ㍦ ῏⯵#⽷⼐#∑㬉 㢰⣲㧏#∑㬉 㖞㘫#ⳂⰦ#∑㬉 ᳇#⤚⢿#ᴮ㍦ 㛾ᬞ⢿⩪#ᴮ㍦ 〤#∑㬉 Თ㶚#Όᥴ#∑㬉 㛾ᬞ#ಪᩦ#ᴮ㍦ ㅪ⠞#ᴮ㍦ ⾗⵿#↕#∑㬉 ⛑㷸#↕#∑㬉 Installing Batteries CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED WITH AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. • Open the battery compartment cover on the back of the remote control.
Names of parts Projector Status Indicators * Lamp indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status of the projector. Temperature Indicator Lamp Indicator Operation Indicator Operation Indicator Red Green(flashing) Green Orange(flashing) Off Orange Red(flashing) Red Lamp Indicator Red(flashing) Green(flashing) Orange Temperature Indicator Red Red (flashing) 11 Standby. Lamp is starting up.
Names of parts Accessories Remote Control Power Cord 2 Batteries Computer Cable Owner’s manual Lens cap and Strap h}0qhw#Surjudp#FG Optional Extras * Contact your dealer to purchase these items. * Contact your service personnel for replacing of lamp. * The lamp is consumable and needs to be replaced with a new one when it is burned out. * Optional parts can be changed without notice to improve the quality of the product, and new optional parts can be added.
Installing and Composition Installing and Composition Installation Instructions * Don’t place the projector in the following conditions. It may cause malfunction or product damage. Provide proper ventilation for this projector. The projector is equipped with ventilation holes(intake) on the bottom and ventilation holes(exhaust) on the front. Do not block or place anything near these holes, or internal heat build-up may occur, causing picture degradation or damage to the projector.
Installing and Composition Basic Operation of the Projector 1. Place the projector on a sturdy and horizontal surface with the PC or AV source. 2. Place the projector with the desired distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3. Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the screen image will be crooked.
Installing and Composition Using Kensington Security System * The projector has a ‘Kensington’ Security System Connector on the side panel. Connect the ‘Kensington’ Security System cable as below. * For the detailed installation and use of the Kensington Security System, refer to the user’s guide attached to the Kensington Security System set. And for further information, contact http://www.kensington.
Installing and Composition Turning on the Projector 1. Connect power cord correctly. 2. Remove the lens cap. If it is left on, it could become deformed due to the heat produced by the projection lamp. 3. Press the POWER button on the remote control or top cover. (Green operation indicator flashes if lamp is in start-up cycle.) * * An image will appear after the operation indicator light turns (Green). Select the source mode with the INPUT button.
Installing and Composition Focus and Position of the Screen Image When an image appears on the screen, check if it is in focus and fits well to the screen. Focus ring Zoom ring * To adjust the focus of the image, rotate the focus ring which is the outer ring on the lens. * To adjust the size of the image, rotate the zoom ring which is the inner ring on the lens. To raise or lower the image on the screen, extend or retract the foot at the bottom of the projector by pushing foot adjusting button as below.
Connection Connection Connecting to a Desktop PC * You can connect the projector to a computer of VGA, SVGA, XGA and SXGA output. * Refer to page 40 for the supported monitor displays of the projector. * You can select an RGB input from the Monitor Out menu that will be output to RGB OUT(RGB1 or RGB2). Connect the RGB IN-1 of the projector and the computer output port with computer cable. * You can also connect to the RGB IN-2 port.
Connection Connecting to a DVD * The output jacks (Y, PB, PR) of the DVD might be labeled as Y, Pb, Pr / Y, B-Y, R-Y / Y, Cb, Cr according to the equipment. < How to connect > Component cable a. Connect the DVD Component cable to the RCA to D-Sub Adapter and then connect the RCA to D-Sub Adapter to RGB IN-1 of the projector. * When connecting the component cable, match the jack colors with the component cable.(Y=green, PB=blue, PR=red) * You can also connect to the RGB IN-2 port.
Function Function * In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just an example to help with the Projector operation. * This operating guide explains operation of RGB(PC) mode mainly. Video Menu Options < RGB mode > Adjusting Video 1. Press the MENU button and then use 䰽/䰿 button to select the ＜ Picture mode Contrast Brightness Sharpness Color R Color G Color B menu. 2. Press the 䯁/䯂#button to select a video item you want to adjust. 3.
Function Color Temperature Control - To initialize values (reset to default settings), select the Natural option. #menu. 1. Press the MENU button and then use 䰽/䰿 button to select the 2. Press the 䯁/䯂# button to select Color temp. item. 3. Press the 䰽/䰿 button to make desired adjustments. * Each press of the 䰽/䰿 button changes the screen as shown below. Natural Cool ＜ Color temp.
Function Brilliant color TM Function 1. Press the MENU button and then use 䰽/䰿 button to select the #menu ＜ Color temp. ＜ Gamma Gamma curve shift ＜ Brilliant color TM White peaking 10 Expert Color Reset 2. Press the 䯁/䯂#button to select Brilliant color TM item. 3. Press the 䰽/䰿 button to select On or Off. * Press the MENU button twice or the EXIT button to exit the menu screen.
Function Expert color Function - This function allows a user to adjust the Gain, Saturation and Hue for Red, Green, Blue, Cyan, Magenta and Yellow individually. 1. Press the MENU button and then use ˘/#˚ button to select the #menu. 2. Press the 䯁/䯂#button to select Expert Color item. 3. Press the OK button.
Function Special Menu Options Selecting Language 1. Press the MENU button and then use , button to select the 2. Press the , button to select Language item. 3. Press the , button to select the language you want to use. l l menu. On-Screen-Display (OSD) is displayed in the selected language. Press the MENU button twice or the EXIT button to exit the menu screen.
Function Flip horizontal Function * This function reverses the projected image horizontally. Use this function when rear projecting an image. 1. Press the MENU button and then use , button to select the 2. Press the , 3. Press the OK button to see reversed image. l l menu. button to select Flip horizontal item. Each time you press the Press the MENU button OK button, the image will be reversed. twice or the EXIT button to exit the menu screen.
Function Auto sleep Function * This function turns the projector off automatically after the preset time is passed when there is no signal. English Language 1. Press the MENU button and then use , button to select the 2. Press the , button to select Auto sleep item. 3. Press the , button to select the desired preset time. l menu. Aspect Ratio 4:3 Overscan 10% Flip horizontal Flip vertical Press the MENU button twice or the EXIT button to exit the menu screen.
Function Using Digital Zoom Function * This function is available only in RGB input mode.The Zoom -/+and Position values return to their defaults when you change the SOURCE or input signal,or turn the power off. Adjusting the Position Adjusting the Zoom 1. Press the ZOOM button on the remote control. 1. Press the ZOOM button on the remote control. 2. Press the 2. Press the button to select Zoom -/+ item. , Zoom -/+ Position Reset 100 MENU Exit 3. Press the choice.
Function To use keystone function 1. Press the KEYSTONE button on the remote control. 2. Press the , Top right Top left Keystone button to select a item. Top left Bottom left Bottom right H 0 Background Top Bottom 3. Press the , Right Signal Keystone reset Left MENU Exit button to select the item (H or V)you want, and press the button to adjust it. , Select You can adjust each item from 0 to 100. The default value may change depending on input mode.
Function Selecting Blank image 1. Press the MENU button and then use 2. Press the l l l l l button to select the menu. button to select Blank image item. , 3. Press the , button to select the color you want to use. , Background image will be altered to the selected Blank image function. You can choose blue, black, green, or captured image for the Blank image. If you have a captured image, you can use it as a blank image instead of logo image. And you only have one last captured image.
Function Using Monitor out Function * You can select either of the two RGB inputs. Keystone 1. Press the MENU button and then use 2. Press the 3. Press the l l , , , button to select the menu. Blank Image Black Captured Image button to select Monitor Out item. button to select RGB1, RGB2 or Auto. Press the MENU button twice or the EXIT button to exit the menu screen.
Function Screen Menu Options Auto configure Function * This function assures you of getting the best video quality by automatically adjusting the horizontal size and synchronization of the image. * Auto Tracking function works in RGB PC input only. 1. Press the AUTO button of the remote controller. Image positioning and synchronization are automatically adjusted. l 2.
Function Using Horizontal Function 1. Press the MENU button and then use menu. , button to select the Auto Configure 2. Press the , button to select Horizontal item. 3. Press the , button to make desired adjustments. 8 0 0 MENU Prev. l Horizontal adjustment range is -50 ~ 50. l The variable range can be different depends on input resolutions. Press the MENU button twice or the EXIT button to exit the menu screen.
RS-232C External Control Device Setup * Connect the RS-232C input jack to an external control device (such as a computer) and control the Projector’s functions externally. SET ID 1. Press the MENU button and then use menu. 2. Press the OK button and then use , , button to select the button to select Set ID item. English Language Aspect Ratio 4:3 Overscan 10% Flip horizontal Flip vertical 3. Press the Press the , button to select your desired number. OK button to save the selected number.
RS-232C Command Reference List Command1 Command2 Data (Hexadecimal) 01. Power k a 0~1 02. Aspect Ratio 03. Screen Mute k k c d 1~2 0~1 04. Contrast 05. Brightness 06. Color 07. Tint 08. Sharpness 09. OSD Select 10. Remote Control Lock / Key Lock k k k k k k k g h i j k l m 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0~1 0~1 11. 12. 13. 14. 15.
RS-232C External control device setup 1. Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1] * [Command 2] * [Set ID] * [DATA] * [Cr] * [ ] : First command to control the set.(k, j, x, ASCII code, 1 Character) : Second command to control the set..(ASCII code, 1 Character) : You can adjust the set ID to choose desired projector ID number in special menu. See previous page. Adjustment range is 1 ~ 99. When selecting Set ID ‘0’, every connected projector set is controlled.
RS-232C 03. Screen Mute (Command:kd) 08. Sharpness (Command:kk) ‹ To select screen mute on/off. ‹ To adjust the screen sharpness.(Video/Component) Transmission [k] [d] [ ] [Set ID] [ ] [Data] [Cr] Data 0 : Screen Mute Off (Picture On) 1 : Screen Mute On (Picture Off) Ack [d] [ ] [Set ID] [ ] [OK] [Data] [x] Data 0 : Screen Mute Off (Picture On) 1 : Screen Mute On (Picture Off) Transmission [k] [k] [ ] [Set ID] [ ] [Data] [Cr] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’.
RS-232C External control device setup 12. Red ADC gain Adjustment (Color R) ‹ (Command:jw) Adjust the Red gain of ADC part.(RGB) 16. Auto Configure (Command:ju) ‹ To adjust picture position and minimize image shaking automatically. It works only in RGB mode. Transmission Transmission [ j ] [w] [ ] [Set ID] [ ] [Data] [Cr] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’.
Information Supported Monitor Display * The following table lists the display formats supported by the projector. Sources Format Vertical Freq.(Hz) Horizontal Freq.(kHz) * If the projector does not support the input signal, “Out of Range” message appears on the screen. * The projector supports DDC1/2B type as Plug & Play function. (Auto recognition of PC monitor) * The Synchronization input form for horizontal and vertical frequencies are Separate.
Information Replacing the Lamp Lamp Replacement The change interval of lamp may depend on the use environment of Projector. You can see the used lamp time in the CHECKING LAMP TIME section of the Menu (page.29). You must replace the lamp when: l l l The projected image gets darker or starts to deteriorate. The lamp indicator is red. The message “Replace the lamp” appears on the screen when turning the projector on.
Information Replacing the Lamp 1 Turn off the projector and unplug the power cable. Carefully place on a cushioned surface. Unscrew the screw from the lamp cover using a screwdriver. 2 (Allow the lamp to cool for 1 hour before removing the used lamp from the projector.) After lifting the lamp cover off, remove the two 3 retaining screws on the lamp case with a screwdriver. 4 Lift the lamp up from the projector. Knob Screws 5 7 Pull out the handle slowly and remove the lamp case.
Information Regarding the projector lamp control WARNING l Don’t turn off the projector at least in 5 minutes after activating it. - The frequent On/Off changes may cause the lamp function to deteriorate. l Don’t pull out the power cord while activating the projector and the cooling fan. - It may cause the lamp life-span to shorten and get damaged. l The life-span of projector may considerably depend on the use environment and treatment conditions.
Information Specifications MODEL BX503 (BX503-JD) / BX403B (BX403B-JD) Resolution 1024(Horizontal) x 768(Vertical)pixel Horizontal / Vertical Ratio 4:3(horizontal:vertical) DLP panel size 0.7 inches Screen size (Projection distance) Wide : 1.0 ~ 7.5m(40 ~ 296 inches) Projection off-set ratio 100% Remote control distance 12m Tele : 1.2 ~ 8.7m(48 ~ 343 inches) Zoom ratio 1:1.2 Video compatibility NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N Power AC 100 - 240V~ 50/60Hz, 4.
The model and serial number of the projector is located on the back or one side of the projector. Record it below should you ever need service.
Regulatory Information cont. FCC Compliance Statement respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements.
Regulatory Information cont. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal.
Regulatory Information cont. • exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available.
Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG.
Regulatory Information cont. Italiano respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, económicos y medioambientales. Informazioni per la tutela dell’ambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente più pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale.
Regulatory Information cont. especificamente o conceito de favorável ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, não há cádmio em nossos monitores. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. Informações relacionadas à reciclagem Este monitor pode conter peças que podem representar riscos ao ambiente.
Regulatory Information cont. ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒΠËÒÔÓθÁÓ‚‡Ìˡ. KÓÔÓ‡ˆËˇ LGE Ô‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚ ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ ‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡ ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚ ·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ ‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚ ·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.
Regulatory Information cont. WEEE un bidone della spazzatura barrato da una croce significa che il prodotto è coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorità locali. 3.
Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger på miljøet og menneskelig sundhed. 4.
Regulatory Information cont.
Regulatory Information cont.
