User's Manual

Settings

The following [Options] are available:

] On: You can only call phone numbers stored in the

Address Book. You must enter your PIN2.

] Off: You can call any number.

n Note

Not all SmartChips have a PIN2. If your SmartChip does not,

this menu option is not displayed.

Change Codes (Menu 9.6.3)

The Change codes feature allows you to change your

current password to a new one. You must enter the

current password before you can specify a new one.

You can change the access codes for: Security Code,

PIN1, PIN2

n Note

PIN: Personal Identification Number.

Connection Menu 9.7

GPRS Attach (Menu 9.7.1)

If you select Power On and you are in a network that

supports packet data, the phone registers to the GPRS

network and sending short messages will be done via

GPRS. Also, starting an active packet data connection,

for example, to send and receive e-mail, is quicker. If

you select When Needed, the phone will use a packet

data connection only if you start an application or

action that needs it. The GPRS connection is closed

after it is not used by any application.

Note

If there is no GPRS coverage and you have chosen Power

On, the phone will periodically try to establish a packet data

connection.

Network Profile (Menu 9.7.2)

This menu shows the Network Profile. You can

However, you cannot delete or edit default

configurations provided by Cingular.

Reset Network Profile (Menu 9.7.3)

This allows Profile information to be restored to

original setting. For example, this option will restore

the Profile that has been deleted by the Delete All

selection from the Network Profile (Menu 4.4)

submenu.