G Order Number : GETEC-C1-10-100 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-041 Page 1 / 1 APPENDIX G : USER’S MANUAL EUT Type: LCOS PROJECTOR FCC ID.
OWNER’S MANUAL LCOS PROJECTOR Please read this manual carefully before operating your set and retain it for future reference. CF3D www.lg.
LCOS PROJECTOR Warning - Class B (b) For a Class B Digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contents Contents Safety Instructions ....................................................... 4 Names of parts Main Body ..........................................................................................7 Control Panel .....................................................................................7 Connecting Part .............................................................................. 8 Remote Control ..............................................................................
Safety Instructions Safety Instructions Please take note of the safety instructions to prevent any potential accident or misuse of the projector. ᰶ Safety Instructions are given in two forms as detailed below. WARNING : The violation of this instruction may cause serious injuries and even death. NOTES : The violation of this instruction may cause injuries or damage to the projector. ᰶ After reading this manual, keep it in the place that you can access easily.
Safety Instructions Power WARNING Never touch the power plug with a wet hand. Do not plug-in too many items into one power outlet. Prevent dust from collecting on the power plug pins or outlet. This may cause an electric shock hazard! It may result in overheating of the outlet and create a fire hazard! This may cause a fire hazard! Power NOTES Hold the plug firmly when unplugging. If you pull the cord, it may be damaged.
Safety Instructions Using WARNING If the projector is in a room that experiences a gas leak, do not touch the projector. Always open the lens door or remove the lens cap when the projector lamp is on. It can cause a fire or a burn by a spark. Using NOTES Do not place heavy objects on top of projector. Take care not to impact the lens particularly when moving the projector. Do not touch the lens of the projector. It is delicate and easily damaged.
Names of parts Names of parts Main Body * The projector is manufactured using high-precision technology. You may, however, see on the Projector screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the manufacturing process and does not always indicate a malfunction. Filter Cover * Do not block this filter when using the projector. Zoom Ring Focus Ring Air Vent Door * Do not close the air vent door when using the projector.
Names of parts Connecting Part RGB OUT RGB IN SVC Only LAN HDMI IN 1/2/3 Kensington Security System Connector AC IN VIDEO IN COMPONENT IN 8 IR (Remote control sensor) * Do not block the IR port for normal operation of remote control.
Names of parts Projector Status Indicators * Lamp indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status of the projector. Power Button Operation Indicator Temperature Indicator Lamp Indicator Turns ON/OFF the projector. Top Filter Cover Lock Blue Green (Blinking) Standby. Power on. Operation Green Temperature Cyan (Blinking) Power off (lamp is cooling for 90 seconds).
Names of parts Accessories Remote Control AAA Battery Owner’s manual CD Owner’s manual Power Cord Polishing Cloth 3D Glasses eZ-Net Manager CD Top Filter Bottom Filter Optional Extras * Contact your dealer to purchase these items. * Optional parts can be changed without notice to improve the quality of the product, and new optional parts can be added.
Installing and Composition Installing and Composition Installation Precautions Provide proper ventilation for this projector. • The projector is equipped with ventilation holes(intake) on • the bottom and ventilation holes(exhaust) on the front. Do not block or place anything near these holes. Internal heat build-up may occur, causing picture degradation or damage to the projector. Do not place the projector on a carpet, rug or other similar surface.
Installing and Composition Positioning the Projector 1. Place the projector on a sturdy and horizontal surface with the PC or AV source. 2. Place the projector with the desired distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3. Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the screen image will be crooked.
Installing and Composition Kensington Security System • This projector has a Kensington Security System Connector on the side panel. Connect the Kensington Security System cable as below. • For the detailed installation and use of the Kensington Security System, refer to the user’s guide included with the Kensington Security System set. And for further information, contact http://www.kensington.
Installing and Composition Focus and Position of the Screen Image When an image appears on the screen, check if it is in focus and fits the screen properly. Zoom Ring Focus Ring • To adjust the focus of the image, rotate the focus ring. • To adjust the size of the image, rotate the zoom ring. When you need to move the screen image up or down, use the zoom ring on the projector to adjust the height as shown below.
Connection Connection Connecting to a Desktop PC * You can connect the projector to a computer with VGA, SVGA, XGA, SXGA output. * Refer to page 33 for resolutions the projector supports. < How to connect > Connect the RGB IN of the projector and the RGB output port of the computer with a computer cable. * You may have to change the resolution that your PC exports to one supported by the projector. Refer to page 33. This projector may not support output from laptops when the laptop screen is on.
Connection Connecting to a DVD Player * Depending on the equipment, the component output jacks (Y, PB, PR) of the DVD Player may be labeled as Y, Pb, Pr/Y, B-Y, R-Y/Y, Cb, Cr. < How to connect a HDMI source > HDMI Cable 1. Connect the HDMI IN 1 (or HDMI IN 2/3) of the projector and the HDMI output port of the DVD Player with an HDMI cable. 2. Set the DVD Player's resolution to one of the following: 480p(576p)/720p/1080i/1080p mode.
Function Function * The On-Screen Display (OSD) in this manual may be slightly different from your projector. * This operating guide explains operation of RGB(PC) mode mainly. To Use The 3D Video * 3D video is the technology of using the different view between the two eyes to make the screen on the screen to look as a 3D space. Caution When Viewing 3D Video Ź When viewing 3D video, watch the projector within effective viewing angle and distance.
Function How to Watch 3D Video 1. Play the title produced in 3D video. Refer to the following for 3D video input format supported. Signal 720p Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 45.00 60 37.50 50 33.75 60 28.125 50 Playable 3D video format 1280x720 Top & Bottom, Side by Side 1080i HDMI 27.00 24 33.75 30 Top & Bottom, Side by Side, Checker Board, Frame Sequential 1920x1080 1080p 67.50 60 56.25 50 Top & Bottom, Side by Side, Checker Board, Frame Sequential 2.
Function * ⠯ᣏ⎊㛢/#⚫Ⅻ⇎⢿#ᖛ♺#ᗚᠦ#⇎⢿㘊#⋂#⠲ጾ#㘗᭓⠞#᎖ᠦ⩻፲ᎎ1 Color Temperature Noise Reduction Gamma Black Level Real Cinema 22 - This function enables Vivid/Standard/Natural/Cinema/Sport/Game. ᰶSet to warm to enhance hotter colors such as red, or set to cool to make picture bluish. ᰶReduces screen noise without compromising video quality. Low : Make dark and middle gray level area of the picture brighter. Medium: Express original picture levels. High: Make dark and middle gray level area of the picture darker.
Function OPTION Menu Options Selecting Language 1. Press the MENU button. Then, move to OPTION with the ġ, Ģ, ˘, ˚ buttons and press the OK button. 2. Press the ġ, Ģ buttons to move to Menu Language and press the OK button. 3. Move to a desired item with the ġ, Ģ, ˘, ˚ buttons and then press the OK button.
Function To Calibrate the Camera * 5#♾⩮⟮#⢫❓㘆#6G#surmhfwru♺⇆#6G#⚫Ⅻ#⎆ⵗ⎆#⤶2❚⠂#᳇ᨦ#⠺ᒃ⟦ᤆ#᪈⸾♞#⦦ጾ#ፏ⟦ᤆ#⎆ⵗ⎆#ኲ⠂#㗦ᤆᑮᨦ# ∶⎆⿆#㑢◲㘆#6G#⚫Ⅻ#⎆ⵗ⟮#ಪፏ㘂ശ#㘓፲ᎎ1 1. Press the MENU button. Then, move to OPTION with the ġ, Ģ, ˘, ˚ buttons and press the OK button. 2. Press the ġ, Ģ buttons to move to Camera Calibration and press the OK button. 3. Press the ˘, ˚ buttons to move to On. 4. Press the ġ, Ģ buttons to move to Calibration Start and press the OK button.
Function High Altitude Mode * High Altitude mode is used when the environment is higher than 3200 feet. 1. Press the MENU button. Then, move to OPTION with the ġ, Ģ, ˘, ˚ buttons and press the OK button. 2. Press the ġ, Ģ buttons to move to High Altitude and press the OK button. 3. Press the ˘, ˚ buttons to move to On and press the button.
Function < How to connect > < PC > Connect the LAN of the projector and the LAN port of the PC or network. LAN Cable < Router > Connecting PC < How to use > ᰰMove ᰷OK OPTION 1. Press the MENU button. Then, move to OPTION with the ġ, Ģ, ˘, ˚ buttons and press the OK button. Menu Language : Englishdoes not exist. Network Do you want to reset? Blank Image : Blue Camera Calibration LAN ᯧ Off Lamp Mode : Normal 2. Press the ġ, Ģ buttons to move to Network Setting and press the OK button.
Function Setting Input Label * This indicates which device is connected to which input port. 1. Press the MENU button. Then, move to OPTION with the ġ, Ģ, ˘, ˚ buttons and press the OK button. 2. Press the ġ, Ģ buttons to move to Input Label and press the OK button. 3. Press the ġ, Ģ buttons to move a desired input.
Information Information Supported Monitor Display * The following table lists the display formats supported by the projector. Format Vertical Freq.(Hz) Horizontal Freq.(kHz) * If the projector does not support the input signal, “Invalid Format” message appears on the screen. * The projector supports DDC1/2B type as Plug & Play function. (Auto recognition of PC monitor) * PC synchronization signal types supported :Separate type synchronization.
Information Maintenance * The projector needs little maintenance. You should keep the lens clean because any dirt or stains may appear on the screen. If any parts need to be replaced, contact your dealer. When cleaning any part of the projector, always turn the power off and unplug the projector first. Cleaning the lens If there is any dust or stain on the surface of the lens, you must always clean the lens.
Information Replacing the Lamp Lamp Replacement The change interval of lamp may depend on the use environment of Projector. You can see the used lamp time in the Lamp Time of INFORMATION section (page.32). You must replace the lamp when: • The projected image gets darker or starts to deteriorate. • The lamp indicator is magenta. • The message “Replace the lamp” appears on the screen when turning the projector on.
Information To obtain a replacement Lamp unit Lamp model number is on page 38. Check the lamp model and then purchase it from an LG Electronics Service Center. Using another manufacturers lamp may cause damage to the projector. Lamp unit disposal Dispose of the used lamp by returning it to the LG Electronics Service Center. Regarding the projector lamp control WARNING • Don’t turn off the projector at least in 5 minutes after activating it.
Information Replacing the Lamp 1. Turn off the projector and unplug the power cable. Carefully place on a cushioned surface. (Allow the lamp to cool for 1 hour before removing the used lamp from the projector.) 2. Unscrew the screw from the lamp cover using a screwdriver. Lamp cover screw 3. After lifting the lamp cover off, remove the two retaining screws on the lamp case with a screwdriver. Lift the lamp up from the projector. Screws Lamp bottom Lamp cover Screws Lamp Knob 4.
Information Specifications MODEL CF3D (CF3D-JS) Resolution 1920 (Horizontal) x 1080 (Vertical) pixel Horizontal / Vertical Ratio 16:9 (horizontal:vertical) Panel size (mm) 15.4 Projection distance (Screen size) Wide: 0.88 m ~ 9.08 m (76.2 cm ~ 762.0 cm) Tele: 1.14 m ~ 11.8 m (76.2 cm ~ 762.0 cm) Projection Offset 100 % Remote control distance 12 m Video compatibility NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N/PAL-60 Power AC 110 V - 240 V~ 50/60 Hz, 6.37 A-2.
Information Open Source Software Notice The following GPL executables and LGPL, MPL libraries used in this product are subject to the GPL2.0/LGPL2.1/MPL1.1 License Agreements: GPL EXECUTABLES: Linux kernel 2.6, busybox, lzo, u-boot LGPL LIBRARIES: uClibc MPL LIBRARIES: nanox LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: opensource@lge.
The model and serial number of the projector is located on the back or one side of the projector. Record it below should you ever need service.
Regulatory Information cont. FCC Compliance Statement respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements.
Regulatory Information cont. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal.
Regulatory Information cont. • exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available.
Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG.
Regulatory Information cont. Italiano respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, económicos y medioambientales. Informazioni per la tutela dell’ambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente più pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale.
Regulatory Information cont. especificamente o conceito de favorável ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, não há cádmio em nossos monitores. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. Informações relacionadas à reciclagem Este monitor pode conter peças que podem representar riscos ao ambiente.
Regulatory Information cont. ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒΠËÒÔÓθÁÓ‚‡Ìˡ. KÓÔÓ‡ˆËˇ LGE Ô‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚ ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ ‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡ ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚ ·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ ‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚ ·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.
Regulatory Information cont. WEEE un bidone della spazzatura barrato da una croce significa che il prodotto è coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorità locali. 3.
Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger på miljøet og menneskelig sundhed. 4.
Regulatory Information cont.
Regulatory Information cont.