User's Manual

ëëSMART FUNCTIONS
ÒÑÌÛ
To verify the Wi-Fi connection, check that É·óÚ·
icon on the control panel is lit.
The appliance supports 2.4 GHz Wi-Fi networks
only. To check your network frequency, contact
your Internet service provider or refer to your
wireless router manual.
Í×ÙÒßÌËÎÛ Õ×ÌÝØÛÒ ÍË×ÌÛ is not
responsible for any network connection
problems or any faults, malfunctions, or errors
caused by network connection.
The surrounding wireless environment can
make the wireless network service run slowly.
If the appliance is having trouble connecting
to the Wi-Fi network, it may be too far from
the router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal strength.
The network connection may not work properly
depending on the Internet service provider.
The Wi-Fi connection may not connect or may
be interrupted because of the home network
environment.
If the appliance cannot be registered due to
problems with the wireless signal transmission,
unplug the appliance and wait about a minute
before trying again.
If the firewall on your wireless router is enabled,
disable the firewall or add an exception to it.
The wireless network name (SSID) should be a
combination of English letters and numbers. (Do
not use special characters.)
Smartphone user interface (UI) may vary
depending on the mobile operating system (OS)
and the manufacturer.
If the security protocol of the router is set to
ÉÛÐ, network setup may fail. Change the
security protocol (ÉÐßî is recommended), and
register the product again.
ײ¬¿´´·²¹ ¬¸» Í×ÙÒßÌËÎÛ Õ×ÌÝØÛÒ
ÍË×ÌÛ ß°°´·½¿¬·±²
Search for the Í×ÙÒßÌËÎÛ Õ×ÌÝØÛÒ ÍË×ÌÛ
application from the Google Play Store or Apple
App Store on a smartphone. Follow instructions to
download and install the application.
λ³±¬» ͬ¿®¬
If the appliance is registered on a home Wi-Fi
network, the preheating function of the oven can be
started or stopped using the SIGNATURE KITCHEN
SUITE smart phone app.
Ю»°¿®·²¹ ¬¸» Ѫ»² º±® ¿ λ³±¬» ͬ¿®¬
ï
Open the oven door to make sure the oven is
empty and ready for preheating. Do not place
food in the oven. Close the oven door. Remote
Start can only be set when the oven door is
closed.
î
Touch ÍÛÌÌ×ÒÙÍ, located at the center bottom
of the display. Touch Remote Start on the first
Settings screen, and then select On. Follow
the instructions on the popup that opens in the
display
í
Follow the instructions in the SIGNATURE
KITCHEN SUITE smartphone app for using the
Remote Start function.
ÒÑÌÛ
Remote Start is disconnected in the following
situations:
Remote Start is never set up in the smart
phone app.
The Remote Start status is “ready”.
Remote Start experiences a problem during
operation.
The Wi-Fi icon on the display shows the status
of the appliance's network connection. If the
Wi-Fi icon is not lit, use the smart phone app to
select the Wi-Fi network or register the product
again.
A faulty Wi-Fi connection could delay the
Remote Start function.
Disconnect the probe if attached.