7.0 LG-DB520 User Guide Ver. 0.11 2000.12.
Contents Unlocking Your Phone.......................................................................... 4 View of Phone ...................................................................................... 4 Installing and Removing the Battery..................................................... 5 Turning Your Phone On and Off ........................................................... 5 Main Menu ........................................................................................... 6 Power Save Mode.
Selecting Ring Types for Voice Calls .................................................. 18 Tone Length........................................................................................ 19 Display Menu....................................................................................................................................... 20 Security .............................................................................................. 20 Locking Your Phone ........................................
FCC RF EXPOSURE INFORMATION WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
Unlocking Your Phone If you received your Sprint PCS SP-510 in the mail, you may need to unlock it before making calls. 1. Press the END/PWR Switch for 2~3 secs. 2. Highlight Unlock and press OK. 33.. Enter your four-digit lock code. For security purposes, the code will not be visible as you type. Note: If you can’t recall your lock code, try using the last four digits of your Social Security number, the last four digits of your Sprint PCS Phone Number or 0000. View of Phone 1.
Folder Headset Jack OK Mouse Volume Control END/PWR CLR Installing and Removing the Battery To install the battery, insert the bottom of the battery into the opening on the back of the phone. Then, push the battery down until the latch clicks. To remove the battery, press down on the latch and remove the battery from the phone. Turning Your Phone On and Off To turn your phone on, move the On/Off Switch (near the antenna) to the ON position.
To turn your phone off, move the On/Off Switch to the OFF position. Main Menu When your phone acquires Sprint PCS Service, the Greeting (a banner of text), the current time and date and the Main Menu are displayed. If you are in a Sprint PCS or authorized analog cellular provider’s service area, you are ready to send and receive calls. Power Save Mode When the phone is in an area without service for 15 minutes, it stops searching for service and enters into the power Save Mode.
2. Press the Mouse Key down to highlight and press . If you have received any calls, they are displayed on the screen. Entering Characters Using the Keypad(T9) To enter a letter, punctuation or number when creating Phone Book or Scheduler entries, press the corresponding key until the desired character appears. By default, the first letter of a word is capitalized and following letters are lowercase. Characters in the following order: 1 1 .
Display Icons Display icons are the symbols your phone uses to communicate important information.
antenna. Signal Strength The quality of each call you make or receive depends on the signal strength on your area. The number of bars in the Signal Strength icon informs you of the current strength. The more bars, the stronger the signal. Battery Capacity Your Sprint PCS SP-510 is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge your battery before it is fully drained.
Placing a Call When the phone is turned on, check the Signal Strength icon to see of you are in a Sprint PCS Service Area or authorized PCS CDMA provider’s service area. 1. Open the Flip. 2. Enter the phone number, highlight Call and press OK . ¢ ÑTip! When dialing long distance, it is not necessary to dial a “1” before the area code. 3. When you are finished with your call, highlight End Call and press OK . If the phone is in Active Flip Mode , closing the Flip will also end the call.
If you need customer service for any reason while using your phone outside the Sprint PCS Nationwide Network, just dial 611 from your Sprint PCS Phone. However, because you’re outside the Sprint PCS Network, you may reach the local service provider’s customer service instead of Sprint PCs Customer Care. To be sure that you reach Sprint PCS Customer Care, dial 1-888-211-4PCS. Correcting Dialing Mistakes To delete one digit at a time, press CLR . To delete all digits, press and hole CLR .
Pauses” ) l Exit – Returns to the Main Menu. l A Phone Book Entry – Displays the Phone Book entry. To dial the entry’s speed-dealing number, press and hold OK . To dial an alternate number, highlight it and press and hold OK . ¢ Ñ Tip! To speed dial a Phone Book entry from the Main Menu, press and hold the entry’s number. If the entry number is two digits, enter the first digit, then press and hole the second digit. (This feature will not work when the Roam Confirm option is enabled.
l The phone rings or vibrates l The LED flashes green l The backlight illuminates l The screen displays an incoming call message l The phone number of the caller is displayed of the phone number is available l The caller’s name is displayed if the phone number is in your Phone Book The following options are also displayed. To select an option, highlight it and press [OK]. l Answer – answers the call. l Silent Ringer – Mutes the ringer.
1. From the Main Menu, highlight Phone Book and press [OK]. 2. Highlight My Phone # and press [OK]. Setting the Ring Volume to Vibrate To set the phone to Vibrate Mode, press the down Volume Control key until Ring Volume Vibrate is displayed. The phone will vibrate and – Vibrate On- is displayed above the Main Menu. To set the phone to Vibrate Mode using the Main Menu, see “Adjusting the Volume” .
Retrieving Page/Text Messages To retrieve page/text messages: 1. From the Main Menu, highlight Messages and press [OK]. 2. Highlight Page/Text and press [OK]. ¢ ÑTip! You can also access page/text messages from the Main Menu by pressing the Mouse Key left 3. Highlight the message you want to display and press [OK]. Press the Mouse Key down to display additional text. ¢ ÑTip! You can view the next or previous message by pressing the Mouse Key left (previous) or right (next) 4.
l Exit – Returns to the Main Menu. Extracting Phone Numbers From Text Messages To extract a phone number from a text message: 1. While displaying a text message, press [OK] to view the Text Message options. 2. Highlight Extract #s and press [OK]. All the phone numbers contained in the message are displayed. Note: If there are no phone numbers to extract from the message, the option does not display. Erasing All Page/Text Messages 1. From the Main Menu, highlight Messages and press [OK]. 2.
(Call History- not functioning) Page/Text Messages For information on page/text messages, see “Retrieving Page/Text Messages” . Erasing Page/Text Messages To erase all page/text messages: 1. From the Main Menu, highlight Messages and press [OK]. 2. Highlight Erase Page/Text and press [OK] 3. Highlight yes and press [OK]. Sounds Adjusting the Volume 1. From the Main Menu, highlight Sounds and press [OK]. 2. Highlight Volume and press [OK]. 3. Highlight Ringer or Key Beep and press [OK].
Selecting Ring Types for Voice Calls To Select a Ring Type for Voice Calls: 1. From the Main Menu, highlight Sounds and press [OK]. 2. Highlight Ring Type and press [OK]. 3. Highlight Voice Calls and press [OK]. 4. Highlight With Caller ID, No Caller ID or Roaming and press [OK]. Note: If you select Roaming, the Ring Type is used for all incoming roaming calls. 5. Highlight a Ring Type and press [OK]. You will hear a preview of the Ring Type when you highlight it.
Tone Length Longer tone lengths may be better for tone recognition when dialing voicemail or other automated systems. To select a tone length: 1. From the Main Menu, highlight Sounds and press [OK]. 2. Highlight Tone Length and press [OK]. 3. Highlight Short of Long and press [OK]. Alert Notification To enable of disable alert sounds: 1. From the Main Menu, highlight Sounds and press [OK]. 2. Highlight Alerts and press [OK]. 3. Select an alert by highlighting it and pressing [OK].
Display Menu Security Accessing the Security Menu You must enter your lock code to view the Security menu. If you forget your lock code, try using the last four digits of your Social Security number, the last four digits of your Sprint PCS Phone Number or 0000. Security Menu To access the Security menu: 1. From the Min Menu, highlight Security and press [OK]. 2. Enter your lock code.
Changing the Lock Code To change your lock code: 1. From the Security menu, highlight Change Lock and press [OK]. 2. Enter your new lock code. 3. Reenter your new lock code. Answering Your Phone with the Hands-Free Car Kit You can select different answering options when your phone is connected to the Sprint PCS Hands-Free Car Kit. To answer calls automatically or by pressing any key: 1. From the Main Menu, highlight Setup and press [OK]. 2. Highlight Car Use and press [OK].