LG-DM120 USER GUIDE (LG-DM120)
FCC RF EXPOSURE INFORMATION WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
LG-DM120 CHAPTER 1.
LG-DM120 CHAPTER 2. BASIC FUNCTIONS Turning the Phone On and Off 1. Connect the terminal to the charged battery or the external power supply. 2. Press the [END/PWR] key for about 1.5 seconds until a red right appears on the upper side of the terminal. < Turning the Terminal Off > 1. Press the [END/PWR] key until the end message appears on the LCD, and then stop pressing the key. 2. If an antenna is stretched, push it in for safety.
LG-DM120 3. If you are not sure of the phone entry number, select the Soft Key(BOOK) with the Right Mouse Button. 4. Place the cursor on the Phone Book, and press the Soft Key(SEL) with the Left Mouse Button. 5. Search the Phone Book Entry number or name requested in the Phone Book to attempt a call to the phone number stored in it. PHONEBOOK SRCH [???] Rm 1.Call History LG CION BANNER Sep/09 12:30p MENU BOOK 2.Phone Book ¢ Î 3.
LG-DM120 character requested will be erased. Receiving Calls 1. Press any key except for the [END/PWR] key to receive a call. Η Press the END Key to end the incoming call 2. When the call completes, press the [END/PWR] key. 3. Or close the flip. Mute 1. Press the Soft Key(MENU) with the Left Mouse Button during the call. 2. If a popup menu appears on the screen, place the cursor on the Mute menu and press the Soft Key(SEL) with the Left Mouse Button to select the Mute state.
LG-DM120 - “Missed”: Ten last missed calls are stored in this menu. 4. Place the cursor on the menu requested, and press the Soft Key(SEL) with the Left Mouse Button. e.g.) Place the cursor on the “Outgoing” menu and press the Soft Key (SEL) with the Left Mouse Button. 5. The phone number list will appear. Place the cursor on the phone number or name requested, and press the [] key. Then, the call will be attempted. 01 : 1111111 02 : 2222222 03 : 3333333 04 : 4444444 1.Outgoing 2.Incoming 3.
LG-DM120 CHAPTER 3. MENU FEATURE Main Menu It is possible to verify or change various functions or setup the terminal status on the main menu. Rm LG CION BANNER Sep/09 12:30p MENU BOOK m General Guidelines to MENU Access and Settings 1. Sound 1. Press the Soft Key(MENU) on the left and the menu items will appear. 2. Use the upside and downside keys (é ê) to move to the menu items 2. Display 3. System 4. indicated Call Infoon not screen. SEL ¡ ã ¡ å the BACK 3.
LG-DM120 2. Ring Type ( F [MENU]-1-2 ) Set one of three Ring Types (Ring, Vibrator, Ring+Vibrate and Lamp) with the direction keys. Ring Type ¢ º Ring Vibrate VIB+Ring Lamp OK ¡ ã ¡ å BACK 3. Ringer Volume ( F [MENU]-1-3 ) Ring Volume --------------- Set of the ring volume in five levels (Most High - High - Medium – Low - Off ) with the direction keys. The ring volume is also adjustable with the side keys while the bell is ringing --------------OK ¡ ã ¡ å or in a call waiting state. BACK 4.
LG-DM120 7. Alerts Sound ( F [MENU]-1-7 ) An alert signal is activated according to each situation by five 1. Fade 2. Minute 3. Service 4. Call Connect ¡ ã ¡ å SEL submenus under the Alert menus. BACK - Fade: It is activated if the call is disconnected in a busy line state. (On / Off) - Minute : This signal is activated when 1minute elapses from the call connection. (On / Off) - Service : This signal notifies whether a call is available or not between the service and the no service areas.
LG-DM120 4. Languages ( F [MENU]-2-4 ) < TBD> It is possible to set the language to be used in the terminal among Language four languages with the direction keys (Select one of three languages of English, Spanish, and Portuguese) English Protogunes ¡ ã ¡ å OK BACK Menu 3. 1. Set NAM( F [MENU]-3-1 ) Select one NAM in the two NAM (Number Assignment Module) SELECT NAM NAM # 1 NAM # 2 services. Select either “No. 1” or “No. 2” with the direction key. Both “No.1” and “No.
LG-DM120 Menu 4. 1. Last Call ( F [MENU]-4-1 ) Last Calls 02-850-3021 Data:8/11,2000 Time: 00:01:05 OK ¡ ã ¡ å This service shows the last call time. BACK 2. Home Calls (F [MENU]-4-2 ) Home Calls Home Calls Total: 2 Calls Time: 00:08:00 OK - ZERO 2 Calls 00:08:00 OK Zero OK BACK ZERO BACK Total call time at the Home system (not roaming) from initial setup to the present. 3.
LG-DM120 Data/Fax menu is selecting the (Off), (Data In), or (Fax In). 2. Auto Answer ( F [MENU]-5-2 ) Auto answer service is one of the most useful functions while Auto Answer Off After 1 ring After 3 rings driving a vehicle, and it enables automatic answering to the incoming call after the bell rings for designated times. (Off, 1 ring after, 3 ring after, 5 ring after) OK ¡ ã ¡ å BACK 3. Auto Retry ( F [MENU]-5-3 ) Auto Retry Off 10sec. 30sec. 60sec.
LG-DM120 Menu 7. Select the Soft Key(MENU) on the left in an initial call waiting state, and select [6. Security]. Then a message will appear on the LCD to ENTER LOCK CODE request the Lock Code. If you fail to enter the correct Lock Code of ____ four characters, the process will not proceed to the following low level menu. And if the Lock Code is not correct, the process will return to QUIT CLR the Main Menu. 1.
LG-DM120 CHAPTER 4. Message Massage Service This service supports reception of the text message, alerting, origination of the text message, and the voice mailbox. It is possible to access the above functions with the text message key Call back service is also available with the call key ([OK] key) , if the calling number is indicated on the message received. It is possible to store up to 25 messages (received message : 20 , originated message : 5) and to receive up to 120 characters per message.
LG-DM120 Hello this is Ki m from IBM. Plea se call me ASAP. I wiil be staying OK Hotel Clinton. at Erase Waiting... BACK OPT - - [Next]: It indicates that there is another message received. (If no more new message has been received, the old text list will be indicated.) [Erase]: It erases the message. [Call back]: It calls back to the calling number. 1.1.2 Old Text (*) 1.Received Msg 1.Text(1/0) 2.Send Msg 3.Setting 2.Voice(0) 3.
LG-DM120 1.3 Erase All - This service enables erasing of all the messages stored by the message service. Erase Message Erase All Message? Erasing Data Please Wait. Selecting OK OK BACK 2. Send message - Menu to originate SMS 2.1 New MSG - Menu to originate new SMS LG CION Sep/09 [Fri] 1.Received Msg BANNER 2.Send Msg 3.Setting 123-456 12:30p BOOKm MENU ¢ ºCall Receiver Phone # Rm SEL ¡ ã ¡ å BACK ¡ ã ¡ å OK BACK Write MSG [80] Back# 1.New Msg 2.Old Msg 3.
LG-DM120 2.2 Old Message - Menu to originate the message from the messages stored by the message service LG CION Sep/09 [Fri] 1.Received Msg BANNER 2.Send Msg 3.Setting 123-456 12:30p BOOKm MENU ¢ ºCall Receiver Phone # Rm Back# ¡ ã ¡ å SEL BACK 2:No 3:Call me 4:Need directi 5:Where are yo 6:Will I call 3.Erase 567-890 OK BACK ¡ ã ¡ å ¡ ã ¡ å SEL BACK ¢ º1:Yes 1.New Msg 2.Old Msg ¡ ã ¡ å ¡ ã ¡ å OK BACK SEL BACK - After selecting message number, select OK and SEND message 2.
LG-DM120 3. Setting - It is possible for the user to set the alarm to report arrival of a message. Alert: Select one of 2 alerts, 4 alerts, mute and vibrator services. 1.Alert Rm LG CION Sep/09 [Fri] BANNER 1.Received Msg 2.Send Msg 3.
