Norton Antivirus update You should have an internet access to process Norton Antivirus update. ⍛[Norton Antivirus]⍛[Live Update]-[Norton ⓞ Click [Start] and [All programs]⍛ AntiVirus]. ⓟ Click [Next]. ⓠ Following window appears.
ⓡ Click [Next]. ⓢ Downloading update-items online. ⓣ Click [Finish] . Norton Antivirus Update is complete.
Running Norton Antivirus ⍛[All programs]⍛[Norton Antivirus]⍛ ⍛[Norton AntiVirus2004]. ⓞ Click [Start]⍛ ⓟ Click [Scan for virus] and select an item to scan. ⓠ Norton AntiVirus is scanning virus. Note ã If any virus is detected, click [Fix] to repair. ⓡ Click [Finish]. Virus scanning is complete.
PHPR memo 47
3.System setup The system setup saves your computer’s hardware configurations in CMOS RAM. The system setup provides you with information, such as the size and type of your hard disk, size of the installed memory, date, and time. 3-1. Starting the system setup You may want to use the CMOS Setup Utility in the following situations: ã Booting the system floppy disk. (page 50). ã Setting a password(page 51). ã Changing or removing the password(page 52). ã Recovering the factory default settings(page 54).
Note ã 'LUHFWLRQ keys (arrow keys) move the cursor up, down, to the left and right. If Num Lock button is off, the arrow keys in the numeric keypad can be used just like the cursor control keys. ⓞ Turn on the computer and monitor. ⓟ When LG logo appears on the screen, press [Delete]. ⓠ The CMOS Setup Utility window appears.
3-2. Booting with a bootable floppy disk Follow the instruction below to set the floppy disk as start up disk. ⓞ Open the CMOS Setup Utility. Use the arrow keys to select Advanced BIOS Features and press [Enter]. ⓟ Use >Ⓑ@ >Ⓒ@ >⒵@, and >Ⓐ@ keys to select 1st Boot Device. Use page up/down keys to select Floppy.
3-3. Setting a password If you want to protect the system setup from unauthorized users, follow the instruction below to set a password. You can set a password in the CMOS Setup Utility program. If you forget the password, you cannot gain access to your system. Be sure to write down the password in a safe place only you can refer to in case you forget the password. ⓞ Start the CMOS Setup Utility. Use the arrow keys to select Advanced BIOS Features, and then press [Enter].
ⓡ If the following message appears, enter the new password and then press [Enter]. A password must consist of characters A~Z and numbers 0~9, and has the maximum length of 8. Enter Password : ⓢ If the following message appears, enter the password again, and then press [Enter]. Confirm Password : ⓣ Press [F10] to save the new settings. ⓤ If the following message appears, press [Enter]. The computer restarts. SAVE to CMOS and EXIT(Y/N)? Y 3-4.
ã To change the password, follow the instructions on Setting a password. ã To remove the password, follow the instructions below. ⓟ Use arrow keys to select Set Password, and then press [Enter].
3-5. Recovering the factory default settings You can follow the instructions below to recover the factory default settings. ⓞ Start the CMOS Setup Utility. Use the arrow keys to select Load Optimized Defaults and press [Enter]. ⓟ If the following message appears, press [Y] key and then [Enter]. The factory default settings have been recovered. Load Optimized Defaults (Y/N) ? Y ⓠ To save changes in System Setup, press the [F10] key. ⓡ If the following message appears, press [Enter]. The computer restarts.
3-6. Using Power saving function You can use power saving function in Windows OS no matter how you set the BIOS setup. è[Control panel]è[Switch to classic view]. ⓞ Click [Start]è ⓟ Double click Power option icon from the control panel. ⓠ Set the Power option properties and click [OK]. There are some devices which do not support the power saving function properly. If you have installed such devices, you should disable power saving function. ⓡ Click [Advanced] for setup if necessary and then click [OK].
Your computer support ACPI power saving and you can change Sleep State in the BIOS system setup. Set to S3(STR) to manage power more effectively in standby mode. Use the power button to exit standby mode. If you want to use a keyboard stroke or mouse movement to exit standby mode, change S3(STR) to S1(POS). Note: S1(Power On Suspend), S3(Save to Ram) ⓞ Start the CMOS Setup Utility. Use the arrow keys to select Power Management Setup and then press [Enter].
PHPR memo 57
4. System Recovery The system setup saves your computer’s hardware configurations in CMOS RAM. The system setup provides you with information, such as the size and type of your hard disk, size of the installed memory, date, and time. Restoring the system by using Recovery CD You can restore your computer system by using Recovery CD, shipped with your Computer. You can select two options (Full Recovery without Format / Full Recovery after Format.
To install Windows XP upgrade 1. If Windows XP is already installed on your computer, simply install Widows XP for upgrade purpose without formatting hard disk. 2. If you have Windows Operating system running on your computer, follow the instructions to install Windows XP upgrade. ⓞ Turn on the computer that has Windows XP installed. ⓟ Click [Start] and then select [Run]. ⓠ Insert Recovery CD on your computer, and then type D:ƃi386ƃwinnt32.exe/unattend on the [Run] dialogue box and press [OK].
5.Reinstalling the driver 5-1.Reinstalling the print driver After connecting a printer, you should istall the printer driver. Windows XP automatically recognize the printer driver. If the printer driver does not function correctly, re install the printer driver by following instructions. ⓞ [Start] - [Control panels] - [Switch to classic view]. ⓟ Double-click [Printer&Fax] icon. ⓠ If the following dialogue box appears, select [Add a printer].
ⓢ Select [Local or Network Printer] and then click [Next]. ⓣ [New Printer Detection] dialogue box appears, click [Next]. ⓤ Select LPT1 and then click [Next]. ⓥ Select Manufacturer and printer, and then click [Next]. If your computer came with an installation disk, click [Have Disk].
[Have disk] button was selected ⓦ Insert the manufacturer's installation disk, and then make sure that the correct drive is selected bellow. [Next] button was selected ⓦ You must assign a Printer name, and then click [Next]. ⓧ Print Test Page appears, click [Yes] and then press [Next].
ⓨ Test page is now printing, click [OK]. ⓩ If followig dialogue box appears, click [Finish]. ⓪ Adding the new printer process is now completed.
5-2.Reinstalling the sound device driver Sound driver enables you to listen music files and CD from your computer. Sound driver is came with your computer. But if the computer does not recognize the sound driver, you should re-install the sound driver. ⓞ Turn on the computer and the moitor. ⓟ Insert LG Giljabi CD into the CD-ROM drive, and then select the sound driver. ⓠ Sound driver installation starts. complete the processs by the instructions on the screen.
5-3.Reinstalling the video driver Video driver is came with your computer. But if the computer does not recognize the sound driver, you should re-install the sound driver. ⓞ Turn on the computer and the monitor. ⓟ Insert LG Giljabi CD into the CD-ROM drive, and then select the video driver. ⓠ Video driver installation starts. complete the process by the instructions on the screen.
