P/N:3828BPH016A NK series Rev.00 NK series P/N: 3828BPH016A(Rev.00) Copyright 2005 LG Electronics, Inc., DigitalMate Co., Ltd.
Thank you for using the LG product. LG has manufactured and tested this product to provide you with a reliable computing environment. Please read this manual carefully before using the computer. This sign calls attention to features and operations that may be dangerous to the user. Follow the instruction closely to reduce the risk of bodily harm or damage to the equipment 1.Warning: Not following the instruction could result in death or serious injury. 2.
Contents Important Safety Instructions .................................................................................................. 2 1. Installing the system 1-1 Contents of the Product .......................................................................................................................... 9 1-2 Composition ........................................................................................................................................... 10 1-3 Installation ..................
Important Safety Instructions Following instructions are to help users to use the product safely and properly and to prevent any potential risk or damage. Please read the following instructions carefully before using the product. Installation Do not use the product in damp places including a laundry room and bathroom. The computer may not function correctly, and there is the risk of electric shock. Operate the computer within a temperature range of 41 to 95 (5 ~35 ) and 30 to 80% of relative humidity.
Power Connection Do not use loose plugs or damaged power cords. An electric shock or fire may occur. Operate the product at the proper voltage. Excessive voltage may result in damage on the product, electric shock or fire. Use a socket with an earth pin equipped. If not earthed, the product may cause an electric shock and get damaged. Use power outlets with an earth pin installed and proper supply of rated elec tricity. An electric leakage may cause an electric shock or fire.
Use a socket with an earth pin equipped. If not earthed, the product may cause an electric shock and get damaged. Use power outlets with an earth pin installed and proper supply of rated elec tricity. An electric leakage may cause an electric shock or fire. Do not impair the cord by excessive bending or hard pressing. Keep the power cord out of reach of children and pets. A damaged power cord may cause an electric shock or fire.
Do not put a lit candle or burning cigarette on the computer. A fire may occur or the product may get damaged. If you smell or see smoke from the computer, stop using the computer and dis connect the power before contacting the service center. A fire may occur. Please ask one of our engineers to check the operational state after your com puter has been repaired. Otherwise, there exists a possibility of an electric shock or fire. Leave the product away from heat-generating devices such as a heater.
Storing and Moving the Computer Before moving the computer, turn off the power and disconnect all cables. If not, one may trip over the wire, damaging the computer and getting an injury. Upgrading the Computer When disassembling the computer, do not take out the power supply unit and prevent children from swallowing nuts unscrewed. If a child swallowed a nut, they may get suffocated. In that case, see the doctor immediately. Do not disassemble the power supply unit. You may get an electric shock.
Safety Notes to Prevent Data Loss (HDD Management) Handle the computer with care to prevent a data loss. Since the hard disk is sensitive to shocks, please make a back-up file of important data all the time. The manufacturer will not be responsible for any hard-disk data loss caused by a user's mistake. Hard disk damage and data loss may occur when. External shocks are given on the computer while the computer is separated or installed.
Help and Support Click the "Help and Support" menu to learn Windows operation and troubleshooting, and receive technical supports. Please read the menu before using the computer. Click [Start] button, and then Help and Support. Then, the following screen will appear. Suggested items, text search result, Microsoft Knowledge Base and other contents are investigated. Microsoft Knowledge Base is supported only when the Internet is connected.
1.Installing the system 1-1. Contents of the Product Contents and the front design of the product may differ by model. Be sure to use designated cleaning chemicals to clean your computer. Use of other chemicals such as thinner, benzene or alcohol may cause damage or deformation of the product.
1-2.
Power Button/Power Lamp and H/D Indication Lamp Turns on/off the computer. Indicates the power and the hard disk state when the computer is turned on(When the hard disk is running, the lamp will blink. However, this feature may not function in some systems.). Floppy disk drive Enables reading from and writing to a 3.5 inch floppy disk. Floppy disk drive button Floppy disk drive button is used when insert/eject floppy into floppy disk drive.
Rear Part Note The rear configuration may differ from the image depending on product model.
Computer Power Connector Connects the power cord to provide power to the computer. Keyboard Connector Connects a PS/2 keyboard. Mouse Connector Connects a PS/2-type mouse. Do not disassemble power supplies. There is a risk of electrical shock. Serial Connector A serial communication connector to exchange data between the computer and external devices. Video Connector Connects the monitor cable to use a built-in video. Does not function when a video card is installed.
1-3. Installation Installation is not difficult, and we recommend users to install by themselves. Before installation, turn off the computer and all peripheral devices. As the keyboard and the mouse use same-shaped connectors, please check the symbols next to the mouse connector hole and the keyboard connector hole. Card composition is different from product to product. Do not leave a liquid container on the computer. An electric shock may occur and the system could break downr.
Connecting the Keyboard The connector of the keyboard cable is round in shape and consists of 6 pins. Insert the keyboard connector pin correctly in the keyboard connector hole on the rear panel of the computer. Insert the keyboard cable connector as shown in the figure. Connecting a Mouse The mouse cable has a round connector with 6 pins. The round connector on the mouse cable fits into the PS/2 connector on the rear of the computer.
1-4. Connecting Peripheral Devices (To Be Separately Purchased) Do not connect too many cables to one extension cord. An electric shock may occur. Do not leave the power cord below the body. Do not touch the outlet when connecting or disconnecting the power cord. An electric shock may occur.
Connecting Monitor (To Be Separately Purchase) The monitor signal cable and the power cords are included in the package box. For more information about using the monitor, see the monitor manual. When using a built-in video When the video card is installed Connect the monitor signal cable to the Video port to transmit computer signals to the monitor. Connect the monitor power cable both to the monitor and the power outlet to supply power to the monitor.
2.Using the System 2-1.Turning on the Computer Check if the floppy disk drive on the front part of the computer is empty and the power cord and the peripheral devices are connected to the computer on the rear panel. After installing the system, register user information. Turn on the power of the main body, and register user information by following the Windows screen instructions.
Internet connection option screen appears, follow the instruction. If you turn the power on the computer for the first time, you have to register your copy of Windows XP. The registration process may differ depending on the model, but the difference does not affect the use of your computer. Who will use this computer? message appears on the screen. Type the namesof the users and click [Next].
"Thank you!" message appears on the screen. Click [Finish] to complete the registration process. Certificate of Authenticity The certificate of authenticity includes the Windows product key. This certificate is the unique indication that proves your Windows is authentic. Do not damage or remove this sticker (attached on the side of the product.). The certificate provided may be different from this image.
2-2.Using Windows XP Windows XP is brilliant, fresh, and easy to use. The desktop and task bar images are simplified, and you can easily access applications through the Start menu. There are more "Desktop" options for you to customize the environment. Windows XP Tour Windows is an operation system of the computer. It is recommended to know basic functionality of Windows for better use of a computer. Minimize Maximize Close Click the [Start] button and click Windows XP Tour. Then, the window will appear.