User's Manual

57System setup
Regardless of BIOS setup, you can use the Power Saver mode in Windows as fol-
lows.
3-7. Setting the Power Saver Mode
Press the advanced tab and set options appropriately. Then, click the [OK] button.
After setting Power Scheme items in the Power Schemes tab, click the [OK]
button.
Select [Start] [Control Panel] [Switch to Classic View].
Double-click the Power option icon on the Control Panel window.
TWhen the device connected to
the computer does not support
Power Saver functions, the
Standby mode or Hibernate mode
may not be properly function.
In this case, deactivate Power
Saver feature.
Hibernate Mode :The current
work states are saved intact on the
H/D before the power goes off.
The states will be recovered as
they were when the power is on
later.
Note