ENGLISH OWNER’S MANUAL LED LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LED LCD MONITOR MODEL E2342V E2442V E2742V www.lg.
TABLE OF CONTENTS CONTENTS ENGLISH ENG 19 3 ASSEMBLING AND PREPARING 3 Unpacking 4 Parts and buttons 6 20 TROUBLESHOOTING Setting up the Monitor set 22 SPECIFICATIONS 6 - Attaching the Stand 22 6 - Detaching the Stand 7 - Mounting on a table 8 - Mounting on a wall 23 24 25 E2742V Preset Modes (Resolution) 25 Indicator 10 USING THE MONITOR SET 10 Connecting to a PC 10 - D-SUB connection 10 - DVI-D connection 10 - HDMI connection 12 CUSTOMIZING SETTINGS 12 Accessing
ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING ENG ENGLISH Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card D-SUB Cable DVI-D Cable (This cable is not included in all countries.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG MENU Power Indicator yyLighting On: Turned on yyLighting Off: Turned off / / MODE / AUTO / INPUT / EXI T (Power Button) MENU / / MODE / AUTO / INPUT / EXIT Button (See p.12) DC-IN / Connection panel (See p.
ASSEMBLING AND PREPARING Setting up the Monitor set E2742V 1 Place the Monitor set with the screen side down on a flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. Stand Body 2 2 E2342V/E2442V Stand Base Stand Body 2 3 3 ENG ENGLISH Use two screw to assemble the Stand Body and back cover, attach the stand base and then tighten the screw to the right with a Coin.
ASSEMBLING AND PREPARING Detaching the Stand ENGLISH ENG 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 E2742V Turn the screw to the left with a Coin, and then pull out the Stand Base from the Stand Body. Remove 2 screws and pull out the Stand Body from the Monitor set. E2342V/E2442V Turn the screw to the left with a Coin, and then pull out the Stand Base from the Stand Body, then pull out the Stand Body from the Monitor set .
ASSEMBLING AND PREPARING Mounting on a table 7 3 Press (Power) button on the bottom switch panel to turn the power on. ENG ENGLISH 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. CAUTION 10 cm 10 cm Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.
ASSEMBLING AND PREPARING WARNING Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Connect the Kensington security system cable between the Monitor set and a table. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.
ASSEMBLING AND PREPARING Mounting on a wall E2342V Model 75 x 75 M4 4 100 x 100 CAUTION 10 cm 10 cm VESA (A x B) Standard screw Number of screws E2442V E2742V 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount interface in accordance with VESA Standards.
USING THE MONITOR SET USING THE MONITOR SET ENGLISH ENG Connecting to a PC Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. DVI-D connection Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.
USING THE MONITOR SET CAUTION NOTE When you want to use two PC in our Monitor, yy please connect the signal cable(D-SUB/ DVI-D/HDMI) respectively in Monitor set. If you turn the Monitor set on while it is cold, yy the screen may flicker. This is normal. Some red, green, or blue spots may appear yy on the screen. This is normal. Self Image Setting Function Press the power button on the bottom panel to turn the power on.
USING THE MONITOR SET CUSTOMIZING SETTINGS ENGLISH ENG 1 Press the desired button on the bottom of the Monitor set . 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select EXIT to leave the OSD menu. / MENU / MODE / AUTO / INPUT / EXIT Monitor set Buttons Button MENU / Description Accesses the main menus.(See p.
CUSTOMIZING SETTINGS Customizing Settings MENU ENG ENGLISH BRIGHTNESS Menu Settings CONTRAST 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. R WIDE / ORIGINAL WIDE 1/2 RESET NO 1/2 2 Set the options by pressing the ◄ or ► or ▼ buttons. NEXT MENU 3 Select the " NEXT MENU " button to enter the more option EXIT settings. MENU 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.
CUSTOMIZING SETTINGS Picture ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to MENU display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. ＞ NEXT MENU ＞ A SHARPNESS B BLACK LEVEL OVERSCAN 3 Enter to PICTURE by pressing the ▼ button. PICTURE 5 HIGN 1/2 OFF 1/2 4 Set the options by pressing the ◄ or ► or ▼ buttons. EXIT 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.
CUSTOMIZING SETTINGS 15 COLOR ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. MENU 2 Select the " NEXT MENU " button to enter the more option settings. ＞ NEXT MENU ＞ GAMMA COLOR GAMMA 1 2/3 WARM 1/4 COLOR TEMP 3 Select COLOR by pressing the ► button. 4 Enter to COLOR by pressing the ▼ button. RED 50 GREEN 50 BLUE 50 EXIT 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu.
CUSTOMIZING SETTINGS DISPLAY ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option MENU settings. ＞ NEXT MENU ＞ DISPLAY 5 HORIZONTAL 3 Select DISPLAY by pressing the ► button. 4 Enter to DISPLAY by pressing the ▼ button. VERTICAL 25 CLOCK 25 PHASE 25 5 Set the options by pressing the ◄ or ► or ▼ buttons. EXIT 6 Select EXIT to leave the OSD menu.
CUSTOMIZING SETTINGS 17 OTHERS ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. MENU 2 Select the " NEXT MENU " button to enter the more option settings. A 3 Select OTHERS by pressing the ► button. W ＞ NEXT MENU ＞ OTHERS ENGLISH 1 / 15 POWER INDICATOR ON 1/2 WHITE BALANCE NO 1/2 LANGUAGE 4 Enter to OTHERS by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons.
TROUBLESHOOTING SUPER ENERGY SAVING Settings ENGLISH ENG 1 Press ( SUPER ENERGY SAVING ) button on the bottom of the Monitor set to display the SUPER ENERGY SAVING OSD. SUPER ENERGY SAVING SUPER ENERGY SAVING IS ACTIVE YOU SAVED 12.34 TREES POWER REDUCTION:123W CO2 DECREMENT:123G 2 Set the options by pressing the ◄ or ► or ▼ buttons. OFF ON RESET 3 Select EXIT to leave the OSD menu. EXIT Each option is explained below.
TROUBLESHOOTING 19 PICTURE MODE Setting 2 Set the options by pressing ◄ or ► buttons. 3 Select EXIT to leave the OSD menu. PICTURE MODE CUSTOM TEXT PHOTO CINEMA GAME Each option is explained below. PICTURE MODE CUSTOM Description It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu. TEXT It is a mode that the screen is adjusted to the best for the text works. PHOTO It is a mode that the screen is adjusted to the best to view pictures.
SPECIFICATIONS TROUBLESHOOTING ENGLISH ENG Check the following before calling for service. No image appears Is the power cord of the display connected? y Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? y Press the Power button. y Adjust the brightness and the contrast.
SPECIFICATIONS 21 CAUTION Display image is incorrect The screen color is mono or abnormal. yy Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. yy Make sure the video card is properly inserted in the slot. yy Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. The screen blinks. yy Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
SPECIFICATIONS SPECIFICATIONS ENGLISH ENG E2342V Display Sync Input Video Input Resolution Plug & Play Power Consumption Screen Type 58.3 cm (23 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coating Visible diagonal size: 58.3 cm Pixel Pitch 0.265 mm x 0.265 mm (Pixel Pitch) Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Input Form Separate Sync.
SPECIFICATIONS 23 SPECIFICATIONS Display Sync Input Video Input Resolution Plug & Play Power Consumption Screen Type 60.9 cm (24 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 61.0 cm Pixel Pitch 0.277 mm x 0.277 mm (Pixel Pitch) Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Input Form Separate Sync.
SPECIFICATIONS SPECIFICATIONS ENGLISH ENG E2742V Display Screen Type Sync Input Pixel Pitch Horizontal Frequency Vertical Frequency Video Input Input Form Signal Input Resolution Input Form Max Plug & Play Power Consumption Power Input AC-DC Adapter Recommend DDC 2B(Analog,Digital) On Mode : 30 W(Typ.) Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W 19 V 2.2 A 68.5 cm (27 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 68.5 cm 0.311 mm x 0.
SPECIFICATIONS 25 Preset Modes (Resolution) ENG ENGLISH E2342V, E2442V, E2742V Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.
SPECIFICATIONS PROPER POSTURE ENGLISH ENG Proper posture for using the Monitor set. Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor set to avoid it reflecting light.
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
