LCD TV OWNER’S MANUAL 47LH85 55LH85 55LH95 Please read this manual carefully before operating your set and retain it for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. Model: Serial: 1-800-243-0000 This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting and this is the setting in which power savings will be achieved.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 2 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories specified by the manufacturer. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
SAFETY INSTRUCTIONS 4 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Back Panel Information . . . . . . . .
SOUND & LANGUAGE CONTROL APPENDIX Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 92 Clear Voice II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Preset Sound Setting (Sound Mode) . . . . . . . . . . . . . . . . 94 Sound Setting Adjustment - User Mode . . . . . . . . . . . 95 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 TV Speakers On/Off Setup . .
FEATURE OF THIS TV High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. This TV contains the detailed calibrations necessary for professional certification by the Imaging Science Foundation.
PREPARATION ACCESSORIES PO W ER EN ER GY 1 SAVIN G 4 LI 0 MU MEN IN CD Manual TE MA FA RK V T CH E EN G A P U R FO RE Owner’s Manual PU 3 6 9 FL BA ASH CK U Q.M EN TE IN 5 8 ST VO L MOAV DE 2 7 TU RN PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. 1.5V 1.
PREPARATION FRONT PANEL INFORMATION ■ Image shown may differ from your product. LCD TV PREPARATION RF Receiver (Model: EAX6069R) CH CHANNEL (D,E) Buttons VOL VOLUME (+, -) Buttons ENTER ENTER Button MENU SPEAKER MENU Button INPUT INPUT Button Remote Control Sensor, Intelligent Sensor Adjusts picture according to the surrounding conditions POWER Button Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.
BACK PANEL INFORMATION ■ Image shown may differ from your product. LCD TV 2 USB SERVICE ONLY IN 5 9 MEDIA BOX OFF AC IN 2 3 /DVI IN 1 4 1 Y PB PR L R VIDEO L/MONO AUDIO R 2 AUDIO VIDEO AUDIO IN RS-232C IN (SERVICE ONLY) 9 SERVICE ONLY AV IN COMPONENT IN ON 3 PREPARATION 1 3 2 2 1 1 HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio. Doesn’t support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included).
PREPARATION WIRELESS OPERATION The Media Box transmits the 1080p HD video signal using 60 GHz freuency wirelessly. PREPARATION LRP (1-40 Mbps) TV AV1 AV2 COM1 USB IN COM2 1 RGB 2 3 4 WIRELESS POWER IN 4 HRP (3-4 Gbps) Media Box features G Uncompressed 1080p HD video signal transmission from Media Box to TV in LOS 10 m. G Beam direction due to 60 GHz frequency feature. G Smart antenna technology: Beam direction can be change by obstacle.
MEDIA BOX INSTALLATION PREPARATION 13
PREPARATION STAND INSTRUCTION ■ Image shown may differ from your TV. PREPARATION INSTALLATION (For 47LH85) 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the TV as shown. 3 Fix the 4 bolts securely using the holes in the back of the TV. ! NOTE G 14 When assembling the desk type stand, make sure the bolt is fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten.
1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 Detach the stand from TV. PREPARATION DETACHMENT PROTECTION COVER 4 Insert the PROTECTION COVER into the TV. After removing the protection paper from the protection cover, adhere it to the TV as shown.
PREPARATION VESA WALL MOUNTING PREPARATION Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.
CABLE MANAGEMENT ■ Image shown may differ from your TV. Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT CLIP as shown. PREPARATION 1 CABLE MANAGEMENT CLIP 3 Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.
PREPARATION DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. PREPARATION 4 inches 4 inches 4 inches 4 inches CAUTION G G Ensure adequate ventilation by following the clearance recommendations. Do not mount near or above any type of heat source. SWIVEL STAND After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND ■ You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.
PREPARATION ■ ■ To prevent damage do not connect to the power outlet until all connections are made between the devices. Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION PREPARATION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ Image shown may differ from your TV. HD RECEIVER SETUP This Media Box can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device. EXTERNAL EQUIPMENT SETUP Component Connection 1.
WATCHING TV / CHANNEL CONTROL HDMI Connection 1. How to connect Connect the digital set-top box to HDMI/DVI IN 1, 2, 3, or 4 jack on the Media Box. 2 No separate audio connection is necessary. HDMI supports both audio and video. HDMI OUTPUT 1 2. How to use Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select the HDMI1, HDMI2, HDMI3, or HDMI4 input source on the Media Box using the INPUT button on the remote control.
DVI to HDMI Connection 1. How to connect 2 Connect the digital set-top box audio output to the AUDIO IN ( RGB/DVI ) jack on the Media Box. AUDIO L DVI OUTPUT R 2 2. How to use ■ 1 Y PB PR L R VIDEO L/MONO AUDIO R 2 AUDIO VIDEO AUDIO IN /DVI IN Select the HDMI1, HDMI2, HDMI3, or HDMI4 input source on the Media Box using the INPUT button on the remote control. 1 AV IN Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
EXTERNAL EQUIPMENT SETUP DVD SETUP Component Connection 1. How to connect Y 2 Connect the audio outputs of the DVD to the COMPONENT IN AUDIO 1 jacks on the Media Box. PB PR L R 1 2 2. How to use Turn on the DVD player, insert a DVD. Select the Component1 input source on the Media Box using the INPUT button on the remote control. If connected to COMPONENT IN 2 input, select the Component2 input source on the Media Box. Refer to the DVD player's manual for operating instructions.
HDMI Connection 1. How to connect 2 No separate audio connection is necessary. HDMI supports both audio and video. HDMI OUTPUT 1 ■ /DVI IN ■ Select the HDMI1, HDMI2, HDMI3, or HDMI4 input source on the Media Box using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. COMPONENT IN 2.
EXTERNAL EQUIPMENT SETUP VCR SETUP Antenna Connection 1. How to connect EXTERNAL EQUIPMENT SETUP 1 2 Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN socket on the Media Box. Connect the antenna cable to the RF antenna in socket of the VCR. 1 ANT OUT ANTENNA/ CABLE IN OPTICAL DIGITAL AUDIO OUT S-VIDEO VIDEO L R AUDIO ANT IN OUTPUT SWITCH Wall Jack 2 2. How to use ■ ■ Set VCR output switch to 3 or 4 and then tune Media Box to the same channel number.
LCD TV AND MEDIA BOX WIRED SETUP 1. How to connect 1 IN 5 2 SERVIC No separate audio connection is necessary. HDMI supports both audio and video. 1 2. How to use ■ USB SERVICE ONLY O L/MONO AUDIO R AV IN Select the Component1 input source on the Media Box using the INPUT button on the remote control. AUDIO IN IN (PC) (RGB/DVI) OPTICAL DIGITAL AUDIO OUT AN CA EXTERNAL EQUIPMENT SETUP Connect the HDMI IN 5 of the TV to the HDMI OUT jacks on the Media Box.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder Video Game Set 1. How to connect Connect the AUDIO/VIDEO jacks between Media Box and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) VIDEO ■ ■ R Select the A V 2 input source on the Media Box using the INPUT button on the remote control. If connected to AV IN 1 input, select the A V 1 input source on the Media Box. Operate the corresponding external equipment.
AUDIO OUT CONNECTION Send the TV’s audio to external audio equipment via the Audio Output port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). 1 AV IN O AUDIO R Connect one end of the optical cable to the Media Box port of OPTICAL DIGITAL AUDIO OUT. AUDIO IN 2 Connect the other end of the optical cable to the digital audio input on the audio equipment.
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection RGB OUTPUT AUDIO 1. How to connect Connect the VGA output of the PC to the RGB IN ( P C ) jack on the Media Box. 2 Connect the PC audio output to the AUDIO IN ( RGB/DVI) jack on the Media Box. 1 2 2. How to use ■ ■ Turn on the PC and the Media Box.
! NOTES To get the the best picture quality, adjust the PC graphics card to 1920x1080. G The synchronization input form for Horizontal and Vertical frequencies is separate. G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G G In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, Phase, and Size can also be adjusted. EXTERNAL EQUIPMENT SETUP PICTURE Move SCREEN Enter E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto Config. Position R G • Advanced Control Size • Picture Reset Screen (RGB-PC) Phase Reset 1 MENU Select PICTURE. ENTER Select Screen (RGB-PC). ENTER Select Resolution.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Move SCREEN Enter E • Contrast 50 • Sharpness 50 • Color 50 • Tint 0 Prev. Resolution 50 • Brightness Move Auto Config.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. EXTERNAL EQUIPMENT SETUP PICTURE Move SCREEN Enter Move Prev. E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto Config.
Screen Reset (Reset to original factory values) Returns Position, Si ze, and Phase to the default factory settings. This feature operates only in RGB-PC mode. Move SCREEN Enter Move Prev. E • Contrast • Brightness 50 • Sharpness 50 • Color 50 • Tint Resolution 50 0 Auto config. Position R • Advanced Control • Picture Reset Screen (RGB-PC) To Set G Size Yes No EXTERNAL EQUIPMENT SETUP PICTURE Phase Reset 1 MENU Select PICTURE. ENTER Select Screen (RGB-PC). ENTER Select Reset.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Turns the TV on from standby or off to standby. POWER AV MODE ENERGY SAVING Adjusts the Energy Saving. G p.86 INPUT WATCHING TV / CHANNEL CONTROL ENERGY SAVING AV MODE Toggles through preset Video and Audio modes. G p.58 INPUT Rotates through inputs. Also switches the TV on from standby. G p.56 VOLUME UP Adjusts the volume.
NUMBER button — (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASHBK Tunes to the last channel viewed. CHANNEL Changes the channel. UP/DOWN PAGE Moves from one full set of screen information to the next one. UP/DOWN FAV Scroll through the programmed Favorite channels. G p.54 MARK Select the input to apply the Picture Wizard settings. G p.79 Use to mark or unmark a photo/music. G p.
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV First, connect power cord correctly and switch the AC power control switch on TV. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , INPUT, CH ( or ) button on the TV or press the POWER, INPUT, CH ( or ), Number (0~9) button on the remote control. 1 WATCHING TV / CHANNEL CONTROL 2 Select the viewing source by using the INPUT button on the remote control.
CHANNEL SELECTION 1 Press the CH ( or ) or NUMBER buttons to select a channel number. Adjust the volume to suit your personal preference. 1 Press the VOL (+ or -) button to adjust the volume. 2 If you want to switch the sound off, press the MUTE button. 3 You can cancel the Mute function by pressing the MUTE or VOL (+ or -) button.
WATCHING TV / CHANNEL CONTROL INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best picture in your home environment. ■ “Store Demo” Mode is only intended for use in retail environments.
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
WATCHING TV / CHANNEL CONTROL When connecting HDMI5 HDMI1 WATCHING TV / CHANNEL CONTROL 42 HDMI2 HDMI3 PICTURE PICTURE Move HDMI4 AUDIO AUDIO Enter Aspect Ratio : 16:9 Auto Volume Picture Mode : Standard Clear Voice II • Backlight 100 • Contrast 70 Balance • Brightness 40 Sound Mode • Sharpness 40 • Color 70 • Tint E 0 HDMI5 Move Enter : On : On • Level 0 - + 0 L R : Standard • SRS TruSurround XT: Off R G • Treble 50 • Bass 50 E ! NOTE G This product not o
QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Aspect Ratio F 16:9 A Aspect Ratio: Selects your desired picture format. P i c t u r e M o d e: Selects the factory preset picture depend on the viewing environment. Sound Mode: Selects the factory preset sound for type of program. Multi Audio: Changes the audio language (Digital signal). SAP: Selects MTS sound (Analog signal).
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. CHANNEL Move Enter Move WATCHING TV / CHANNEL CONTROL Auto Tuning Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Enter Check your antenna connection. The previous channel information will be updated during Auto Tuning. Yes No 1 MENU Select CHANNEL. ENTER Select Auto Tuning.
Add/Delete Channel (Manual Tuning) When selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter CHANNEL Move Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Enter DTV F G Select channel type and RF-channel number. Channel 2 DTV 2-1 Bad Normal Good Delete Close 1 MENU Select CHANNEL. ENTER Select Manual Tuning.
WATCHING TV / CHANNEL CONTROL Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using CH button during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select it in the Channel Edit menu.
CHANNEL LIST You can check which channels are stored in the memory by displaying the channel list. Channel List This padlock is displayed when the channel is locked with parental control. DTV 2-1 DTV 3-1 DTV 4-1 Displaying Channel List 1 Display the Channel List. LIST Selecting a channel in the channel list 1 WATCHING TV / CHANNEL CONTROL Exit Select a channel. 2 Switch to the chosen channel number. ENTER Paging through a channel list 1 CH P A G E 2 RETURN Turn the pages.
WATCHING TV / CHANNEL CONTROL FAVORITE CHANNEL SETUP Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select all the in-between channels. To tune to a favorite channel, press the F A V (Favorite) button repeatedly. 1 Del/Add/Fav F CH G P A G E or 1 2 3 4 5 6 7 8 9 Select your desired channel. 0 WATCHING TV / CHANNEL CONTROL 2 Q.MENU Select Del/Add/Fav. A 3 Favorite Select Favorite. 4 Q.
BRIEF INFORMATION Brief Info shows the present screen information. 1 Show the Brief Info on the screen. INFO 2 RETURN Return to TV viewing. 1 2 3 4 5 6 Brief Info Title Test.. DOLBY DIGITAL CNN Sat, Feb 21, 2009 Multilingual 10:40 AM 10:10 AM CC Caption 11:40 AM 1080i TV-PG D L S V Wireless Signal CC 4:3 16:9 480i 480p 720p 1080i 1080p Multilingual : The program contains two or more audio services. Use the Q.MENU menu to select wanted Audio.
WATCHING TV / CHANNEL CONTROL INPUT LIST Only these input signals which are connected to a TV can be activated and selected. 1 Select the desired input source. ■ You can also select the desired input source in the INPUT menu. ENTER INPUT TV WATCHING TV / CHANNEL CONTROL HDMI4 AV2 HDMI3 Component1 HDMI2 ie) HDMI1 Component2 RGB-PC Disconnected inputs are inactive (grayed out) TV AV1 AV2 Component1 Component2 Input Label Exit Select a desired input source (except T V).
INPUT LABEL You can set a label for each input source when it's not in use. OPTION Move Enter OPTION Move Enter Menu Language : English Menu Language : English Audio Language : English Audio Language : English AV1 Input Label Input Label SIMPLINK : On SIMPLINK Key Lock : Off Key Lock Simple Manual Caption : Off Caption Set ID :1 Set ID E G : OffRGB-PC : 1 HDMI1 E HDMI2 HDMI3 HDMI4 Close With using OPTION menu With using INPUT button 1 1 MENU 2 Select OPTION.
WATCHING TV / CHANNEL CONTROL AV MODE AV Mode toggles through preset Video and Audio settings. Off Cinema Game Sport ■ ■ WATCHING TV / CHANNEL CONTROL ■ ■ 1 AV MODE Press the AV MODE button repeatedly to select the desired source. ■ 2 ■ ENTER If you select “Cinema” in AV mode, Cinema will be selected both for “PICTURE menu - Picture Mode” and “AUDIO menu - Sound Mode” respectively. If you select “O f f” in AV mode, the “Picture Mode” and “Sound Mode” return to previous selected value.
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
WATCHING TV / CHANNEL CONTROL SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the logo are fully supported. SIMPLINK can be turned on and off in the user menus.
SIMPLINK Functions Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. ■ Select AV device: Enables you to select one of the AV devices connected to TV. ■ Disc playback: Control connected AV devices by pressing the , ENTER, G, A, l l, FF and GG buttons. ■ Power off all devices: When you power off the TV, all connected devices are turned off. ■ Switch audio-out: Offers an easy way to switch audio-out.
USB ENTRY MODES When you connect a USB device, this pop up menu is displayed automatically. When the Pop Up menu does not appear, you can select Photo List or Music List in the USB menu. In USB device, you can not add a new folder or delete the existing folder. 1 Connect the USB device to the USB IN jacks on the TV. ■ This TV supports JPG and MP3 files. When removing the USB device USB Select the USB Device menu before removing the USB device. 2 Select PHOTO LIST, MUSIC L I S T or MOVIE L I S T.
PHOTO LIST You can view .JPG files from USB storage devices. The On Screen Display on your model may be slightly different. Supported photo file: *.JPG ■ ■ You can play JPG files only. Only baseline scan is supported among JPG. USB Screen Components 2 1 MENU 1 Moves to upper level folder 2 Preview: Display the thumbnail/folder name of the photo in the selected folder 3 ENTER Select U S B.
USB Photo Selection and Popup Menu Photo List Page 2/3 Drive1 JMJ001 1366x768, 125KB Up Folder Navigation USB Drive1 JMJ001 03/30/2008 06/10/2008 KY104 06/19/2008 KY102 04/03/2008 KY105 01/31/2008 JMJ001 01/01/2000 JMJ005 05/13/2008 JMJ002 06/15/2008 JMJ006 05/26/2008 JMJ003 04/03/2008 JMJ007 02/18/2008 JMJ004 02/18/2008 JMJ008 02/18/2008 Page 2/3 CH Page Change Up Folder MARK Mark Exit No Marked Up Folder 1366x768, 125KB 1 KY103 KY101 Popup Menu Photo List Naviga
Full Screen Menu You can change the Photo List view so that it fills the screen. More operations are available in full screen mode.
USB 6 ENTER Select the Slideshow, BGM, Delete, Option, or Hide. (Rotate), ■ 1/17 Slideshow BGM Delete Option Hide Use button to select the previous or next photo. ■ Use button to select and control the menu on the full-sized screen. USB Slideshow: Selected photos are displayed during the slide show. If no photo is selected, all photos in the current folder are displayed during slide show. ■ Set the time interval of the slide show in Option.
