User's Manual

Settings
74
3. TTY Hear:
- Users who can hear but cannot talk send a
text message and receive voice messages
through TTY equipment.
4. TTY Off:
- Normal users send and receive without
TTY equipment.
Connecting TTY Equipment and a
Terminal
1. Connect a TTY cable the TTY connection on
the terminal. (the TTY connection location
is the same as a hands-free ear socket)
2. Enter the phone menu and set up the
desired TTY mode. (For a TTY mode, see
below)
3. After setting a TTY mode, check the LCD
screen of the phone for the TTY icon.
4. Connect the TTY equipment to the power
source and turn it on.
5. Make a phone connection to the desired
number.
6. When a connection is made, use the TTY
equipment to type in and send a text
message or send a voice message.
7. The voice or text message from the receiver
end appears on the TTY equipment display.
Hearing Aid (Menu 9.4.9)
If you select On, users with hearing aid will
be able to hear more clearly.
This hearing aid mode applies to all calls.
Users need to slide up the phone during
voice calls in order to activate this hearing
aid mode.
Send DTMF Tones (Menu 9.4.0)
You can send the DTMF (dual tone multi-
frequency) tones of the number on the display
during a call.
This option is helpful for entering a password
or account number when you call an
automated system, like a banking service.
Time & Cost (Menu 9.4.*)
Call Duration (Menu 9.4.*.1)
Allows you to view the duration of your
incoming and outgoing calls. You can also
reset the call times.