Exhibit 8 FCC PART 15 Subpart C EUT Users Manual FOR LG Electronics Inc. LG Kangseo B/D 36, Munlae-Dong, 6-Ga, Youngdungpo-Gu, Seoul, 150-096, Korea FCC ID: BEJGT8320C October 30, 2000 This Report Concerns: Original Report Test Engineer: Test Date: Equipment Type: Digital Spread Spectrum Cordless Phone – Household Appliances Hien Pham October 12, 2000 Reviewed By: John Y.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C TABLE OF CONTENTS 1 - GENERAL INFORMATION................................................................................................................................................. 3 1. 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)....................................................................................3 1.2 OBJECTIVE ...................................................................................................................
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C 1 - GENERAL INFORMATION 1. 1.1 Product Description for Equipment Under Test (EUT) The LG Electronics Inc., FCC ID BEJGT8320C or the "EUT" as referred to in this report is a Digital Spread Spectrum Cordless Phone which has 20 channel possible in the 904-926 MHz Bandwidth, and the transmission range up to 1 Km in open sight (longer range than analog 900MHz cordless phone). The EUT was composed of two parts: one is the handset which measures 9” L x 2.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C 1.5 Test Facility The Open Area Test Site used by Bay Area Compliance Laboratory Corporation to collect radiated and conducted emission measurement data is located in the back parking lot of the building at 230 Commercial Street, Suite 2, Sunnyvale, California, USA.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C 1.7 Equipment Under Test (EUT) Manufacturer LG Electronics Inc. LG Electronics Inc. Description Handset Base Model GT-8320C GT-8320C Serial Number None None FCC ID BEJGT8320C BEJGT8320C 1.8 EUT Configuration Details and List NOT APPLICABLE 1.9 External I/O Cabling For Base: Cable Description Length (M) Port/From Non-Shielded Phone Cable 2.
Exhibit 8 LG Electronics Inc.
Exhibit 8 LG Electronics Inc.
Exhibit 8 LG Electronics Inc.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C FCC Part 15 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C COMPANY LETTERHEAD DIGITAL SECURITY CODE: The model(s) GT-8320C has the circuitry for digital security code to provide protection against unintentional access. For each model, one of 16777216 kinds of digital security code is randomly selected and fixed in each telephone as it is manufactured. D.S.Kim / Quality Engineering Dept. LG Information & Communications, Ltd.
Exhibit 8 LG Electronics Inc.
Exhibit 8 LG Electronics Inc.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C GT-8320C (900MHz DSST WITH CALLER ID AND CALLWAITING ID) MANUAL This equipment has tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the installation.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C GETTING TO KNOW YOUR NEW PHONE Your new GT-8320C telephone gives you the ultimate in cordless telephone sound quality with the luxury of Caller ID and Call Waiting ID If this is your first cordless telephone, you'11 soon discover that your cordless is similar to regular telephone, except without the cord.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C New Call 88 Program / Answer Memory Record Memo Page Erase 1 4 GHI 5 JKL 7 PQRS 8 TUV * 3 DEF 2 ABC 6 MNO 9 WXYZ 10 Redial/ Pause # 0 OPER Volume +1 Flash SPK LOCATING KEYS, LIGHT, AND SWITCHES ON THE BASE ¬ The PAGE key - is a homing system for finding the handset. If you press the PAGE key once, the handset beeps for 15 seconds. - IN USE light - becomes lit when the GT-8320C is being used.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C ¯ VOICE MAIL light – flashes slowly to alert you when you receive new messages in your voice mail message mail box. MESSAGE WAITING appears on the display. NEWCALL light – flashes more slowly when you receive new calls. This light continues to flash until you review the new calls. ON THE HANDSET Keys TALK key-Turns the phone on or off so you can dial or talk. Voice mail key. 12 : 22 Directly access your PM 12 / 01 CALL ) 01 1- 555 – 123 - 4567 V.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C VOLUME UP/DOWN KEY- Allows you to adjust the loudness of the handset earpiece, or the ringer or allows you to edit the character at Memory mode. HEADSET Jack It allows you to add a headset to the handset (not included, but available by order.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C SETTING UP YOUR PHONE Now that you've checked the contents of the carton, it only takes a few steps to set up your phone. STEP 1. CHOOSE A CENTRAL LOCATION FOR THE BASE UNIT The base should be away from all other electronic equipment such as a personal computer, microwave, stereo ,or television. It is also a good idea to place the unit away from noisy areas, or from heat sources such as a radiator or direct sunlight. STEP 2.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C 5. Use the same method to replace the bracket. 6. Insert the 8 inch line cord into phone jack marked TEL LINE. 7. Thread the line cord through the channel on the right-hand side of the bracket to secure the cord. 8. Plug the adapter tip into the adapter jack. Be sure that the tip is all the way into the jack. 9. Thread the adapter cord through the channel on the left-hand side of the bracket. 10.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C 1. Press down on the battery cover and slide the battery cover down to expose the battery well. 2. Locate the battery connectors inside the battery well. If you are replacing a dead battery, remove the old battery by pulling firmly on the battery cords. 3. Insert the battery plug into the connector. It is polarized and only insert in one direction. 4. Place the battery in the battery well. STEP 5.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C When you make a selection, the check mark, “ ” moves to the selection you have made to use or key. After making a selection, the next programming screens appear. If you make a mistake, press ← (review) key to go back to the previous prompt or start the programming sequence again. When you do not want to go on programming sequence, press PGM to save the previous items and you will exit the programming mode.
Exhibit 8 LG Electronics Inc. 2. Press or FCC ID: BEJGT8320C key to enter your area code. The number appear on the display as you press the dial keys. If you make a mistake, press “DEL” KEY, and re-enter the local code. 3. Press → (REVIEW) key 4. Enter 2nd local code. GT-8320C has 6 local codes. Repeat 1~4 commands to enter other local coldes. STEP 10. SELECTING YOUR LANGUAGE SELECT LANGUAGE You can choose between two different languages, English or Spanish.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C STEP 13. ANSWER PHONE WHEN PICKED UP There are two ways that the GT-8320C can answer a call. The GT-8320C can instantly answer incoming calls when you remove it from the cradle, or the phone can be set to answer after pressing the TALK key. . 1. Press → (REVIEW) key 2. Press AUTO ANSWER or key to set AUOT ANSWER to ON or OFF.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C USING YOUR PHONE You can make calls many different ways with the GT-8320C. DIALING 1. Press TALK key on the handset. 2. Use the number pad to dial the phone number. The phone number appears on the display as you enter the number. You also hear beeps for each digit as you dial. 3. Lis ten for a connection. 4. Press TALK to end your call. REDIALING Redial is a really fast method of calling your last number.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C If you want to add a three-second pause to number in your speed dialing list, press RE/PA key while creating the speed dial entry. For example, if you had a memory location dedicated to your voice mailbox, you might want add a pause in a dialing string for your PIN number. For more information about programming speed dialing numbers, see Creating a speed Dialing List on page 14.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C character. e. Special Symbols You can also use the & ’ 1 key to get the following symbols in the name field: ( ) . 1 5. Enter the telephone number, area code first, using the dialing key pad. (2'nd Line number field) You can have up to 32 digits in the number field. If you make a mistake entering the telephone number, you must: a. Press PGM key to leave speed dialing list. b. Press PGM key to enter the speed dialing list again. c.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C 05 DELETING SPEED DIALING NUMBERS 18886665555 You can erase unwanted speed dial numbers one-at-a-time. DELETE? 1. Press MEMO key to see your speed dial list. 2. Use 3. Press DEL key once, and the GT-8320C asks if you want to delete this entry. 4. Press DEL key again to delete the speed dial number. ← or → (REVIEW) key to find the memory location you want.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C USER SLECTABLE RINGER TONES (H/S) There are four user-selectable ringer tones available for this handset. 1. While in the Stand-by mode, press the FLASH button 2. Press a key (1 to 4) to select a ringer tone mode. USER SLECTABLE RINGER TONES (B/S) There are five user-selectable ringer tones available for this handset. 1. While in the Stand-by mode, press the FLASH button 2. Press the RING button (continuously) to select a ringer tone mode.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C THE INTEGRATED ANSWERING DEVICE TURNING THE ANSWERING SYSTEM ON/OFF 1. To turn the answering system on, press OUT DOOR. A tone sounds. Then, the OUT DOOR button is lighted. 2. Turn the answer system off. Press OUT DOOR again, then, light turns off. SETTING THE CLOCK To set the correct time: 1. Press PROGRAM button. 2. Press TIME (7 digit) button 3. Press number key to input day.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C RECORDING YOUR OUTGOING MESSAGE When you receive a call, the answering system automatically plays either a present greeting, or your own personal greeting. Present Message The following message is pre-recorded “ Hello, I cannot receive your call, please leave your message after a beep. Thank you.” Recording your personal Outgoing Message (OGM) 1. Press RECORD key in stand-by mode. The answering system announces explanation and LED counts recording time.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C Your PIN code plays back for your review. To review your PIN code, press CONFIRM button and press OUT DOOR button. PLAYING YOUR MESSAGE The base 7-segment LED displays the total number of messages. 1. Press / (play/stop) The system announces messages. 2. After reviewing our new messages, you can review your old messages. Press / (play/stop) and 9 or : to review old messages. SKIPPIN G A MESSAGE 1. Press / (play/stop) to review your messages 2.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C USING CALLER ID AND CALL WAITING ID One of the best features of your phone is Caller ID, which allows you to see information about an incoming call before you pick up the phone. With Caller ID service from your local telephone company, the GT-8320C telephone displays and records information about the call in a log. Possibly even better than Caller ID is Call Waiting ID.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C REVIEWING CALL RECORDS To review a call Record: 1. Press 2. Use ← or → (REVIEW) to see how many new calls you have. ← or → (REVIEW) key to move though the Call Record lis t. → (REVIEW) key to see the most recent call record. * Press ← (REVIEW) key to see earlier calls. * Press When you reach either end of the Call Record list, you see an 'END OF LIST' message. If you continue to press ← or → (REVIEW) key, END OF LIST you scroll through the list again.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C To delete all Call Records: 1. Press ← or → (REVIEW) key. The display shows you how many call records you have. 2. Press DEL key and the GT-8320C asks ALL: 23 NEW: 03 you want to delete all Call Records. 3. Press DEL key again and the GT-8320C clears all Call Records, gives you a confirmation beep. DELETE A LL? SEEING LONG RECORDS If you receive long records on caller ID information, you could see that to use the the or or key.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C VOICE MAIL Voice Mail Serves your calls when you are away from your phone or even while you are on the phone. The indicator Light flashes whenever you have message in your mailbox. And once you have programmed your Voice Mail key with your personal access codes, you can get your message at the touch of a button. You must subscribe to Voice Mail Service in order for this feature on your phone.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C READING DISPLAY MESSAGES The GT-8320C informs you of status by displaying the following messages : Message Display ALL CALLS & NEW CALLS: This message lets you know how many call records you have, and how many of those call records are new, In this example, you have 23 call records, ALL: 23 NEW: 03 and 3 new calls. CHARGING: The handset BATTERY is getting low. CHARGING Place the handset in the base in order to recharge.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C Message Display NUMBER ONLY: Either name service is not available in your area, or you are subscribing to a number-only service. PRIVATE: The caller has purposely chosen to block his/her phone number. 10 : 35 PM 10 / 25 CALL 25 555–5555 10 : 35 PM 10 / 25 CALL 25 PRIVATE TALK TALK: The handset is on and ready for you to dial. PAGING : The Base is calling the handset.
Exhibit 8 LG Electronics Inc. Message FCC ID: BEJGT8320C Display OUT OF RANGE: If you use the handset too far away from the base unit during a call, the handset will alert you by audio warning beeps OUT OF RANGE (when using talk) and OUT OF RANGE appears on the display. NUMBER STORED : When you save the call records in the directory or create a speed dialing list, you will see the display NUMBER STORED like this. Forwarded CALLS : The message sent is a forwarded calls.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C TROUBLESHOOTING Are you having trouble with your phone? Here are some of the most common problem areas and solutions. SYMPTOM No dial tone CORRECTIVE ACTION * Verify that the line cord is connected and secure. * Check to see that you are not out of range to the base. * Check that the AC adapter is plugged into the outlet. * Check that the handset is fully charged. * Check to see that the Battery is connected inside the battery compartment.
Exhibit 8 LG Electronics Inc. FCC ID: BEJGT8320C SYMPTOM Blank or fainl CORRECTIVE ACTION * Check the contrast control for the display screen see set up your program * Check the AC adopter Be sure that the adapter is not damaged and that it is securely plugged into a Working Outlet and the phone jack. Also check that the wall plug is not controlled by a wall switch or a power strip. * You might not have received your first call record. NO DATA * Check your service.