User's Manual

LG Electronics Inc. FCC ID: BEJGT8320C
Report # EUT User manual Page 27 of 40 FCC Part 15 Subpart C Test Report
DELETING SPEED DIALING NUMBERS
You can erase unwanted speed dial numbers one-at-a-time.
1. Press MEMO key to see your speed dial list.
2. Use ←← or →→ (REVIEW) key to find the memory location you want.
3. Press DEL key once, and the GT-8320C asks if you want to delete this entry.
4. Press DEL key again to delete the speed dial number.
The GT-8320C clears the number, gives you a confirmation beep
If you do not wish to delete the number, press MEMO key to cancel.
IN BASESET
1. Press PROGRAM key
2. Press MEMORY key
3. Press the address number key
4. Press PROGRAM key
Only phone number is stored in the baseset.
ADJUSTING THE HANDSET VOLUME
1. Press TALK key
2. Press the  or  key to increase or decrease the VOLUME.
The handset sounds an error tone when it reaches the upper or lower limits.
ADJUSTING HANDSET RINGER VOLUME
Press the  or  key on the handset while the phone is not in-use.
You hear the sound of the ringer as you adjust the volume between the two levels.
ADJUSTING BASESET VOLUME
1. Press SPK key
2. Press the  or  key to increase or decrease the volume
ADJUSTING BASESET RINGER VOLUME
Press the  or  key on the handset while the phone is not in-use.
You hear the sound of the ringer as you adjust the volume between the two levels.
05
1 8 8 8 6 6 6 5 5 5 5
DELETE?
Exhibit 8