GW 600 User Guide - English This document is the user guide for the GW600 Windows Mobile Pocket PC. All rights for this document are reserved by LG Electronics. Copying, modifying and distributing this document without the consent of LG Electronics are prohibited.
Part 15.21 statement " Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. “ Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Part 15 Class B Compliance This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions: (1) This device & its accessories may not cause harmful interference. (2) This device & its accessories must accept any interference received, including interference that may cause undesired operation. Body-worn Operation This device has been tested for typical body-worn operations with the distance of 0.79inches (2.0cm) from the user’s body.
GW600 Features v This product’s keys on the LCD screen are touch keys. v Be sure to read “Cautions for Touch Keys” before using this product. Cautions for Touch Keys 1. Make sure your hands are clean and dry. v Remove all moisture from the surface of your hands or the touch keys in a humid environment. 2. You do not need to press hard on the touch keys to make them work. Do not subject the product to severe impact, as this may damage the touch key sensors. 3.
Getting Started Installing the SIM Card and Battery 1. Installing the SIM card. Your SIM card contains your phone number, service details and contacts and must be inserted into your handset. If your SIM card is removed then your handset becomes unusable (except for emergency calls depending on which Country you are in at the time) until a valid one is inserted. Always disconnect the charger and other accessories from your handset before inserting and removing your SIM card.
Getting Started 1. When you recharge your phone after device switch off, the phone's LED lights up red and displays a charging animation. 2. W hen the phone is fully charged, the LED lights up green and the animation stops. 3. When the battery is fully discharged, the LED light is blinked and animation is not displayed. 4. During LED blinking, you cannot power on the phone to get sufficient power for booting. 5.
Disconnecting the Charger Disconnect the travel adapter from the phone as shown in the diagram. Make sure you pull by the plug, not the cord. How to Use a MicroSD Memory Card (Optional) 1. Lift the plastic cover which protects the microSD slot. 2. Insert the memory card into the slot with the metal contacts facing down.
Getting Started Attention: v Avoid using the microSD memory card when the battery is low. v When writing to the card, wait for the operation to complete before removing the card. v The card is designed to fit easily into the system one way only. v Do not bend the card or force it into the slot. v Do not insert any memory cards other than microSD. Supports up to 32GB microSD. For more information on the microSD, please refer to the memory card instruction manual.
Reset the Device Occasionally you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when the device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost. You can also perform a hard reset (also known as a full reset).
Getting Started To perform a hard reset • A Hard Reset should only be performed after all other trouble shooting options have been exhausted. After a hard reset, the device is restored to its default settings - the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. 1. Power the device ON 2. Tap Start > Settings > System tab > Clear Storage. 3. Enter 1234 for the password twice. 4. Press Enter. 5.
Manage Screen Settings The device touch screen has three orientation modes: Portrait, Landscape (right-handed), and Landscape (left-handed). Portrait mode allows you to get a better view or a better operation of certain programs on your device, while Landscape mode may be optimal for viewing longer text files. v To change the orientation, tap Start > Settings > System tab > Screen > General tab, and select the orientation you want.
Screen information The Today Screen Customising the Today screen The Today screen displays important information, such as upcoming appointments and status indicators. You can tap a section on the screen to open the associated program. v To access the Today screen, tap (LG Menu) > Settings > Today > Items tab. You can select the item you want to appear on the Today screen. To change its position, tap Move up or Move Down.
Default MS Today Screen On the Today screen, you can see important and recent information for the day. 1. Start button: Shows the Start menu that you can use directly. 2. LGdatetime: Shows today's date and current time. Tap to select the clock type. 3. Phone information: Wireless Manager / Bluetooth phone on or off. 4. S ervice provider name: Shows your service provider name. 5. U nread message: You can see the unread message from Inbox account. 6.
Screen information Indicators Following are some of the status icons that you may see on your device. Icon Description Bluetooth Hands-Free connection established Bluetooth Hands-Free channel opened Bluetooth High Quality Audio channel opened Indicates the remained battery power . Indicates the battery is very low. Battery charging. Sound on. Sound off. Ringer in vibration mode. Connection is active. Connection is not active. Synchronization in progress. Synchronization error.
Icon Description Calls are forwarded. Call on hold. Missed call or rejected call. GPRS (General Packet Radio Services) available EDGE (Enhanced Data Rates For Global Evolution) available WCDMA or HSDPA available New e-mail or text messages. New voice mail There are more notifications. Tap the icon to view all. SIM is not inserted. You can not use Network service without SIM. Shows the list of running Applications by tapping this indicator.
Screen information Program Indicators Following are some of the icons for the programs that are already installed on your device. Icon Name (Path) Description Apps (Tap LG Menu > Multimedia > Apps) Use pre-installed applications. Screen information 20 AT&T GPS (Tap LG Menu > Applications > AT&T GPS) Helps you get around town by providing voice guided turn-by-turn GPS driving directions with real time traffic based navigation.
Icon Name (Path) Description Stopwatch (Tap LG Menu > Applications > Stopwatch) Allows you to record the elapsed time of an event. The duration of an individual lap time (up to 99 times) and the total time can be displayed. Task Manager (Tap LG Menu > Settings > Task Manager) Check activating task information. Tasks (Tap LG Menu > Communication > Tasks) Keeps track of your tasks. Windows Media (Tap LG Menu > Multimedia > Windows Media) Enables the multimedia function on your device.
Screen information Icon Description Voice Command Enable to use Voice Command function. Select the items where are voice command is enabled. System tab Icon Description About This is where you can see basic information such as the Windows Mobile® version and type of processor used on your device. You can also specify a name for your device. Backlight Set the backlight timeout and adjust brightness. Certificates See information about certificates that are installed on your device.
Icon Description Screen Change the screen orientation, re-calibrate the screen, and change the screen text size. Sensor Set your Auto Luminous Control and Proximity sensor to use or not. System information Check your system information and storage information. Task Manager Shows the executing application list. Time Auto update If Auto update sets On, current city time will follow the network time. Video Share You can change the Video share default settings.
Entering and Searching Information You are available to the various input methods on the screen, including Keyboard, LGJavaKey, Trnscriber, and XT9 Keypad. The Input Panel icon appears on the menu bar to indicate which input method is currently selected. The Input Selector arrow (shown at the right side of the Input Panel icon) opens a list of available input methods. Overview of Input Panel To change the input method, tap the Input Selector arrow.
Using the LGJavaKey v You can use as navigation keys (left/right/up/down/center) when your Java applications are launched. v You can move the cursor and select menu on out of Java application. XT9 Keypad With XT9 keypad, you can enter text by tapping keys displayed on the screen. This is the most common way to enter text with word prediction function in 20 Qwerty of portrait screen. v XT9 Keypad is available when text entry is possible.
Entering and Searching Information / 123 mode If you tap T9/123(abc/123), you can enter 123 mode. Type numbers using one keystroke per number. You can also enter additional symbols in 123 mode. / Symbol mode Short press of FN key gives symbol for one key press, and long press of FN locks symbol mode. The symbol mode enables you to enter various symbols or special characters. You can enter extra symbols by tapping Sym key in full qwerty.
To start Transcriber 1. Start a program that accepts user input, such as Word Mobile. 2. Tap the Input Selector arrow, and tap Transcriber. The Transcriber introductory screen appears. To write using Transcriber 1. In a program, position the cursor where you want text to appear. 2. Use the stylus to write anywhere on the screen. The handwriting will be converted to text shortly after you lift the stylus from the screen.
Entering and Searching Information Transcriber Gestures Use quick strokes of the stylus to edit your text or to insert returns, spaces, or tabs. Do To Insert a paragraph return at the cursor. The horizontal portion of the gesture must be at least two times longer than the vertical portion. Insert a space at the cursor. The horizontal portion of the gesture must be at least two times longer than the vertical portion. Move the cursor one space back and erase any text.
Note v You can also use the Enter, Space, and Backspace buttons on the Transcriber toolbar. The Transcriber toolbar Tap To You can set the transcriber options such as writing direction, text and shorthand. You can set the shape of letters as your handwriting. You can enter numbers, punctuation and symbols. You can change text input methods. • a mode. This is the default for optimum handwriting recognition. • 123 mode. Numbers and some letters are allowed and the calculator is activated. • A mode.
Entering and Searching Information Drawing and Writing on the Screen You can draw directly on the screen, or write on the screen and save notes in your own handwriting. To do this, you must set the input mode in Notes to Writing. If you prefer to use handwriting or frequently add drawings to your notes, you may find it helpful to set Writing as the default input mode. If you prefer typed text, set Typing as the default input mode. To set the input mode for Notes 1. Tap (LG Menu) > Applications > Notes. 2.
To draw in a note 1. Tap (LG Menu) > Applications > Notes. 2. In the note list, tap New. 3. To draw on the screen, use the stylus like a pen. 4. A selection box appears around your drawing. 5. When finished, tap OK to return to the note list. Note v To select a drawing (for example, to copy or delete it), tap and hold the drawing briefly. When you lift the stylus, the drawing is selected.
Entering and Searching Information Thumbnail While viewing a page, a thumbnail can be displayed to: - Give an overview of the current page - Show the position of the current visible screen on the page Currently, there are two modes that can be used. For document map mode, the visible area of the document is the same, and the thumbnail is superimposed at the bottom of the screen, on a transparent panel. A red transparent box on top of this thumbnail shows the current screen position and size.
Quick reference Search > Find Find the word in this document Search > Find prev Find the word before current focused word Search > Find next Find the word after current focused word Search > Snap to result Move to current focused word Search > Cancel Cancel finding the word Thumbnail > Off Off the thumbnail Thumbnail > Document map View the document map Thumbnail > Magnify View the document through magnifying glass Goto > Page Go to page where you want Goto > First Jump to the first page
Entering and Searching Information Recording a Note You can create a stand-alone recording (voice note) or you can add a recording to a note. To create a voice note 1. Tap (LG Menu) > Applications > Notes. 2. Do one of the following: v To create a stand-alone recording, record from the note list. v To add a recording to a note, create or open a note. 3. If you do not see the Recording toolbar, tap Menu > View Recording Toolbar. 4. Hold your device’s microphone near your mouth or other source of sound.
Searching Information You can search for files and other items stored on your device in the My Documents folder or on a storage card. You can search by file name or by words located in the item. For example, you can search in e-mail messages, notes, appointments, contacts, and tasks, as well as in online Help. To search for a file or an item 1. Tap (LG Menu) > Applications > Search. 2. In Search for, enter the file name, word, or other information you want to search for. 3.
General functions Adjust the Device Volume You can set the volume of System and Ringtone, which can be set the volume On or Vibrate state or Off. v System volume : You can change the volume for sounds, such as the sound you hear when you tap program names and menu options. v Ringer volume : You can set the volume of Ringtone. Note v T o adjust the conversation phone volume, you must do it during a call. Adjusting the volume at another time will affect the ring, notification, and MP3 sound levels.
Make a call from Contacts v Tap (LG Menu) > Communication > Contacts. v Tap the desired contact, and tap Call. v You can also tap the desired contact in the contacts list, and tap the phone number that you want to call. Or, tap and hold the desired contact, and on the shortcut menu, tap Call Work, Call Home, or Call Mobile. Make a call from Speed Dial Use Speed Dial to call frequently-used numbers with a single tap.
General functions Receiving a Call When you receive a phone call, a message will appear, giving you the option to either answer or ignore the incoming call. To answer or reject an incoming call v To answer the call, tap Answer, or press v To reject the call, tap Ignore, or press on the device. on the device. To end a call Once an incoming or outgoing call is in progress, you can tap End or press up. In-call Options To put a call on hold v Tap Hold. To switch between two calls v Tap Swap.
To set up a conference call 1. Either put a call on hold, and dial a second number; or, accept a second incoming call when you already have one in progress. 2. Tap Menu > Conference. Note v Not all service providers support conference calling. Contact your service provider for details. To Turn the Speakerphone On and Off The built-in Speakerphone on your device allows you to talk hands-free or lets other people listen to the conversation. v During a call, tap Speaker On.
General functions Additional Dialing Information Make an emergency call v Enter the international emergency number for your locale, and tap Talk. Note v A dditional emergency numbers may be included in your SIM card. Contact your service provider for details.
Communication 41
Communication Call You can use easily with smart dial feature. If you press a number on the keypad, the screen displays the phone number in Call History, Starting with the number you enter, and the names in Contacts or Call History, starting with the characters you enter. You can select you want to call number. You can also make an international call or emergency call. Note You can find your phone number by tapping (LG Menu) > Settings > Phone. Making a Voice Call 1. On the Home screen tap . 2.
Sharing a Video during your Phone Call You can initiate to send or start to receive video with those who has a Video Share capable phone. During a voice call, the phone will let you know whenever you can share video by showing the “Video Share Ready” button. Note This service is only available in AT&T 3G coverage with below conditions. v v v v S ubscribed on the Video Share service. T he service option in the Video Share settings should be ON as default.
Communication Note Only video files that recorded on resolution 176 * 144 are enable to be shared. 4. If the other party accepts your request, a video share session begins. (It can take a few seconds for the other party to accept your invitation and start the Video Share Call.) Note The Speakerphone will be automatically activated when a Video Share session begins, unless a hands-free device (Bluetooth or stereo headset) is connected. 5.
Note v T he speakerphone will be automatically turned on when a Video Share session gets started, and automatically back to the previous mode when a Video Share session ends. v W hen a Hands-free device (Bluetooth or stereo headset) is connected, Speakerphone will not be turned on automatically. Additional Ways to Initiate a Video Share Call From Contacts, Recent Calls and Camera preview, you can make a Video Share session followed by a successful voice call setup.
Communication From Contacts, initiating a Video Share Call You can also initiate Video Share Call from Contact. 1. After selecting a number on the Contact screen 2. Tap the Menu > Video Share and you can choose the sharing type between Live and Recorded. 3. After a successful call setup and checking the other party’s capability of Video Share, Video share invitation will be automatically requested From Recent Calls, initiating a Video Share Call You can also initiate Video Share Call from Recent Calls. 1.
Overview of Contacts Contacts is your address book and information storage for the people and business you communicate with. Store phone numbers, e-mail addresses, home addresses, and any other information that relates to a contact, such as a birthday or an anniversary date. You can also add a picture or assign a ring tone to a contact. To Create a Contact 1. Tap (LG Menu) > Communication > Contacts. 2. Tap New and enter the contact information. 3.
Communication v In Name view, you can search for a contact by entering a name or by using the alphabetical index. To switch to Name view, tap Menu > View By > Name. v To see a summary of information about a contact, tap the contact. From there you can also make a call or send a message. v To see a list of available actions for a contact, tap and hold the contact. v To see a list of contacts employed by a specific company, tap Menu > View By > Company. Then, tap the company name.
v You can also find a contact tap (LG Menu) > Applications > Search. Recent Calls You can view the recently missed, received and dialed calls. You can make a call, send text message, multimedia message and save to contacts. You can delete the number selected or all at once. Save to Contacts You can add the contact info from a communication event to your Contacts. View Note To view detailed information about the communication event. Delete You can delete the selected call list. Send Text Message...
Communication Filter vA ll Calls: Allows you to view the missed, received, and dialled call records. You can make a call, or send a message to the number you have selected from the records. You can also save the number in Contacts. vM issed: Allows you to view the last 20 phone numbers from which someone unsuccessfully tried to reach you. vO utgoing: Allows you to view the last 20 phone numbers that you have called or tried to call.
Messaging This menu includes functions related to text messages, MMS, e-mail. You can send and receive text messages, MMS, Outlook E-mail and Internet E-mail through an Internet service provider(ISP). You can also access e-mail from work using a VPN connection. To Set up an E-mail Account You need to set up an e-mail account that you have with an Internet service provider (ISP) or an account that you access using a VPN server connection (typically a work account) before you can send and receive e-mail. 1.
Communication 6. Select Automatic Send/Receive Interval. 7. Finish to complete setting up your account, or tap Options to access additional settings. Managing Messages v On Select an Account screen, you can view Messages, Outlook E-mail folders. v Tap the folder and you can select message box. 1. D eleted Items: You can view the deleted items. 2. D rafts: You can view saved messages. Select a message and you can edit the message. 3. I nbox: You can view received messaged. Select a message and view.
Downloading Messages The manner in which you download messages depends on the type of account you have: • To send and receive e-mail for an Outlook E-mail account, begin synchronization with Exchange Server through ActiveSync. • To send and receive e-mail messages for an e-mail account that you have with an Internet Service Provider (ISP) or that you access using a VPN server connection (typically a work account), download messages through a remote e-mail server.
Communication * SIM message SIM message means the message stored in SIM card. You can copy this message to the phone. Calendar To Add an Event to your Calendar 1. Tap (LG Menu) > Communication > Calendar. 2. Select the date you would like to add an event to. 3. Tap Menu > New Appointment. 4. Type in the subject and location of the event and check the date and enter time you would like your event to begin. 5. Check other information below. 6.
IM The Instant Messaging feature can only be used with the support of the network operator or communities such as AIM, Windows Live and Yahoo! Messenger. For Instant Messaging users, a valid User ID and Password will be required in order to login and exchange messages as well as checking the online status. The menu items below might not appear since not all IM communities support the various options. Also the menu strings may appear differently based on the selected IM communities.
Communication Switching between Communities You can Sign-in to all the communities at the same time. All the enabled communities are displayed on the top as tabs. Change Status Tap Menu on the Contact List screen, choose the option My Status and then select the desired status Busy/Away/Offline (This can change depending on your IM provider. Contact List The Contact list displays your individual contacts/buddies in a tree list view.
Conversations Conversations for each community appear under the conversation group (the first group) on the Contact list screen. To start a new conversation, select the desired contact on the Contact list screen and press the right softkey Send. A conversation screen would open, type the message and press Enter or click the left softkey Send to send the message. To end a conversation, press the left softkey Menu on the conversation screen and choose End Conversation option.
Communication Closing the Application 1. To sign out; press the right softkey Menu on the Contact list screen and choose Sign Out. 2. To Exit the application without signing out; select the left softkey Exit from the Grid screen. Note Exiting the application will not sign you out and you will continue to receive messages. You will be notified of new message through a pop up. Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring).
To Change the Priority of a Task Before you can sort tasks by priority, you need to specify a priority level for each task. 1. Tap (LG Menu) > Communication > Tasks. 2. Tap the task you want to change the priority for. 3. Tap Edit and in the Priority box, tap a priority level. 4. Tap OK to return to the task list. Note v A ll new tasks are assigned a Normal priority by default. To Set a Default reminder for all New Tasks You can have a reminder automatically turned on for all new tasks you create. 1.
Communication To Locate a Task When your list of tasks is long, you can display a subset of the tasks or sort the list to quickly find a specific task. 1. Tap (LG Menu) > Communication > Tasks. 2. In the task list, do one of the following: v Sort the list. Tap Menu > Sort by, and tap a sort option. v Filter the list by category. Tap Menu > Filter, and tap the category you want displayed. Note v T o filter your tasks further, tap Menu > Filter > Active Tasks or Completed Tasks.
Writing Text There are 6 different input modes for different handwriting styles. v Tap Menu > Insert > Text > and set the input type on the toolbar. To Change the Font or Insert Time/Date v Tap Menu > Options > Advanced tab. v To use a new font, open the drop-down list and choose the new font. v To insert the current date and time automatically into your document, tap Menu > Insert > Time/Date. Making Drawings You can draw in the writing zone or over the top of an inserted image.
Communication To Cut/Copy an Entire Area v To cut/copy a portion of text or part of a drawing, select that part (double-click or drag for text, for drawings). Then from the menu icon, select Edit to choose from Cut/Copy/Paste/Paste before/Paste after/Delete. To Change the Zoom Level v Tap Menu > Zoom or zoom tool. You can set the zoom level (from 25% to 200%). To Use the Personal Dictionary v Tap Menu > Options > the Dictionary tab. v Type the word you wish to enter into the Word text box.
Activesync ActiveSync synchronizes information on your device with information on your PC, such as Outlook content. ActiveSync can also synchronize over a cellular network with Microsoft Exchange Server, if your company or service provider is running Microsoft Exchange Server with Exchange ActiveSync. When you synchronize, ActiveSync compares the information on your device with the information on your PC and/or Exchange Server and updates all locations with the most recent information.
Communication Setting up Windows Vista™ Microsoft Windows Mobile® Device Center is the replacement for Microsoft® ActiveSync® on Windows Vista™. Note v Some versions of Windows Vista come with Windows Mobile Device Center already installed. If Windows Mobile Device Center is not available on your Windows Vista, you can install it from the Getting Started Disc that came with your device.
Use Windows Mobile Device Center To open Windows Mobile Device Center, click Start > All Programs > Windows Mobile Device Center on your Windows Vista computer. On Windows Mobile Device Center, you can do the following: v Click Mobile Device Settings to change synchronization settings. v When you click Pictures, Music and Video > ___ new pictures/video clips are available for import, a wizard guides you to tag and transfer photos from your device to the Photo Gallery on your Windows Vista PC.
Communication Synchronizing Information When you connect your device to the PC using a USB or a Bluetooth connection, ActiveSync will immediately synchronize. While the device is connected, ActiveSync synchronizes every time you make a change on either the PC or the device. Synchronizing Outlook information If you have set up a synchronization relationship between your device and the PC, synchronization keeps Outlook information up-to-date on both computers.
To start and stop synchronization v To synchronize Outlook information and other local information on the PC, including media files, connect your device to the PC using Bluetooth or a cable. v If you are synchronizing directly with Exchange Server, you can use the PC connection to the network that is "Desktop Pass-through", or you can synchronize without connecting to the PC over a cellular network. v In ActiveSync, tap Sync. To end synchronization before it completes, tap Stop.
Communication 1. In ActiveSync on the device, tap Menu > Configure Server. If you have not yet set up synchronization with Exchange Server, this will say Add Server Source. 2. Enter e-mail address, and tap Next. 3. In Server address, enter the address of the server running Exchange Server, select the check box if this Server requires an encrypted (SSL) connection. And tap Next. 4. Enter user name, password, and domain, and tap Next.
Synchronizing Music, Video, and Pictures If you want to carry your music or other digital media with you along while you travel, ActiveSync works with Windows Media Player to synchronise music, video, and pictures. Other than selecting the Media information type in ActiveSync to be synchronised, all media synchronization settings must be set in Windows Media Player. Before media can be synchronised, you must do the following: v Install Windows Media Player Version 10 on the PC.
Communication New Message New Text Messages You can write, edit and view the text messages. v Tap on the home screen to access Messaging menu directly. v Enter the e-mail address or text message address of one or more recipients, separating them with a semicolon. To access addresses and phone numbers from Contacts, tap To. v Enter your message. To quickly add common messages, tap Menu > My Text and tap a desired message. v To check the spelling, tap Menu > Spell Check. v Tap Send.
To start MMS message You can compose MMS messages in a combination of various slides, where each slide can consist of a photo, audio or video clip, and/or text. v From home screen, tap LGMenu > Messaging > Message > Menu > New > MMS. v In To, enter the recipient’s phone number or e-mail address directly, or tap Menu > Add Recipient to choose a phone number or an e-mail address from Contacts. v Enter a subject for your message. v Tap to select and insert a media file by tapping the respective areas.
Communication 10. Enter your User Name and Password and Tap Next to continue. 11. Tap Register and wait for the registration process to complete. 12. When the process is complete, tap OK when the message appears telling you the device has been successfully registered. Tap OK to go to your settings. 13. After successfully registering, your device will automatically display the Xpress Mail Settings screen.
Multimedia 73
Multimedia MEdia Mall Note Additional charges may accrue when you download new content. Contact AT&T for more information. Shop Tones This menu option connects to AT&T’s ringtone download site. AT&T Starter Packs This menu option allows users to download free trials of mobile applications and games. Shop Games This menu option connects to AT&T’s game download site. This allows users to download the various games by connecting to the Internet.
Shop Videos This menu option connects to AT&T’s video download site. This allows users to download the various videos by connecting to the Internet. Shop Music This menu option connects to AT&T’s music download site. This allows users to download music from the Internet. MEdia Net Home This menu option connects to AT&T’s branded web portal that can be customized to display your favorite information.
Multimedia AT&T Music Music Player Allows you to use Windows Media Player. You can play digital audio and video files that are stored on your device or on a network. Adding Music to your Handset Before You Get Started To transfer music from your PC to your device, you will need the following: • Windows Media Player 10 or above • Windows XP Service Pack 2 • Music on your PC in one of these formats: MP3, .AAC, AAC+ or WMA • A MicroSD card • USB data cable *MicroSD card is optional.
Device from the dropdown menu. This step begins the download process. Adding Music to your Handset Music files can be added to your handset by using one or more of the following methods: • Download music and ringtones over the AT&T network directly to your device by using the shopping for music feature. • From your existing digital media collection through Windows Media Player®. • From music stores through the applicable music client.
Multimedia Transferring a Playlist to the handset 1. Open Windows Media Player on your computer (version 10.0 or higher). 2. Use the USB adapter cable to connect the handset to the target PC. 3. Mobile Device will be shown on the computer screen. 4. From within the Windows Media Player application, click on the Library tab. 5. From the left side of the Library tab, click on All Music. The right side of the page is then populated with all of the songs which the player has previously found. 6.
Note 1. If you connect handset with specific USB Hub on your PC, above Music Sync service can not be work. So we recommend direct USB Connection on your PC not using HUB. 2. Do not disconnect during transfer. Check if your PC is running Windows XP and Windows Media Player 10 or later. If your PC is running Windows XP and Windows Media Player 9, please download WMP10 or WMP11 by visiting Microsoft site. 3.
Multimedia Play Media Use the library on Windows Media Player Mobile to find and play songs, videos, and playlists that are stored on your device or removable storage card. To update the Library 1. If you are not on the Library screen, tap Menu > Library. 2. On the Library screen, tap the Library arrow (near the top of the screen), then tap the media storage that you want use, for example, Storage Card. 3. In most cases, Windows Media Player Mobile automatically updates the library.
To save a new playlist 1. If you are not on the Library screen, tap Menu > Library. 2. Tap to select a category (for example, My Music or My Playlists). 3. Select a media file that you want, then tap Menu > Queue Up. This adds the file to the Now Playing list. Repeat this step until you have added all desired media files to the Now Playing list. Note You cannot select multiple files simultaneously. 4. After adding the media files, tap Menu > Now Playing. 5.
Multimedia XM Radio Selecting XM Radio from the AT&T Music sub menu launches a preinstalled application. The application allows the user to listen to dozens of channels of digital radio on your mobile phone. Get unlimited access to commercial-free music, the latest Hip Hop, R&B, Rock, Jazz, Country anywhere you go. WARNING! This product will use a large amount of data and you are responsible for all data charges incurred.
Note Additional charges may accrue when you download content. Contact AT&T for further information. Cellular Video (CV) CV brings you quick, on-demand access to news, sports, weather and entertainment video clips. Catch up on TV’s hottest shows, funniest comedians, biggest headlines and latest sports scores. You can even personalize your homepage for quick access to your favorites.
Multimedia Pictures & Videos The Pictures and Videos program collects, organizes, and sorts images and video clips in the following formats on your device. File Type Image Video Audio File Extensions *.bmp, *.jpg *.avi, *.wmv, *.mp4, *.3gp *.aac, *.wma, *.mp3, *.wav, *.midi You can view the pictures as a slide show, bean them, send them via e-mail, edit them, or set them as the background on the Today screen.
To Play Videos with Audio 1. Tap (LG Menu) > Multimedia > Pictures & Videos. The video files in the My Pictures folder appear as thumbnails by default, which appear with a media icon. 2. Select a video and tap the thumbnail to play it with the built-in Windows Media Player. To Sort Pictures and Video Clips If you store a large number of pictures or video clips on your device, you may find it helpful to sort them to quickly find a specific picture or clip. You can sort by name, date, and size. 1.
Multimedia Note v T o undo an edit, tap Menu > Undo. To cancel all unsaved edits you made to the picture, tap Revert to Saved. To Set a Picture as the Today Screen Background You can use a picture as the background on the Today screen. 1. Tap (LG Menu) > Multimedia > Pictures & Videos. 2. S elect the picture you want to set as the background. 3. Tap Menu > Set as Today Background. 4.
To Assign Pictures to Contacts You can assign a picture to a contact so that you can easily identify the contact at any point of time. 1. Tap (LG Menu) > Multimedia > Pictures & Videos. 2. S elect the picture you want to assign to a contact. 3. Tap Menu > Save > Save to Contact. 4. Tap the contact, or navigate and tap Select to choose the contact from your Contacts list. 5. Tab OK. To Use Advance Options Multimedia 1. Tap (LG Menu) > Multimedia > Pictures & Videos. 2.
Multimedia Weather You can check today's weather and the weather forecast of the city that you chose. Just tap the icon of weather from your home screen. To Change the City and State 1. T ap Start > Settings > Personal tab > Clock Style & Weather. Or you can simply tab the clock from home screen. 2. Tap Weather tab. 3. Select the Region, Country, State and City where you want to get weather data. To Set Options 1. T ap Start > Settings > Personal tab > Clock Style & Weather. 2. Tap Weather tab 3.
FM Radio You can search radio stations and enjoy listening to the radio. Note v T o improve the radio reception, extend the headset cord which functions as the FM antenna. v You cannot use the FM radio without the headset. 1. In order to save/ add a station, tap the bottom middle bar then tap Menu and tap add. 2. After presetting the radio channels, you can listen to all the preset channels by tapping the left or right arrow. 3. You can access the following option menus tapping Menu.
Multimedia Camera ghi pqrs 1. P2ress 3the key to enter camera capture mode directly. Or, tap the Multimedia icon, and then select 5 6 Camera menu. 7 8 9 1 abc def 4 jkl mno tuv wxyz 0 # 2. The picture and filename will be shown after the picture taken. You can automatically save the picture 1 abcby 2 pressing def 3 and return to preview or tap the button. To delete it and return to preview, tap the button. ghi 4 jkl 5 mno 6 pqrs 7 tuv 8 0 wxyz 9 # 3.
Choosing a Shot Type vN ormal shot: This is the default shot type, the photo will be taken in the normal way. vC ontinuous shot: Continuous shot enables you to take three, six, or nine shots automatically in very quick succession. vP anorama: This shot type is great for taking a photo of a large group of people or for capturing a panoramic view. v Frame shot: Choose from one of the fun frames to transform your friend into a pirate or just decorate their surroundings. Video Camera 1 2 press 3 1.
Multimedia Windows Media You can use Microsoft Windows Media Player 10 Mobile for Pocket PC to play digital audio and video files that are stored on your device or on a network, such as on a Web site. Using Windows Media Player, you can play both audio and video files. These are the following file formats that are supported by this version of Windows Media Player (WAV, WMA, WMV, MP3, MIDI,SPMIDI, SMAF, AAC,AMR,3GP,MP4 etc).
Icon Description Plays/Pauses a file. Increases the volume level. Decreases the volume level. Skips to the beginning of the current file or to the previous file. Skips to the next file. Adjusts the playback progress of a selected file. Turns the sound on or off. Displays a video by using the entire screen (full screen). Displays a Web site where you can find music and videos to play. Now Playing Screen Multimedia The screen that displays the Now Playing playlist.
Multimedia Library Screen The screen that lets you quickly find your audio files, video files, and playlists. It contains categories such as My Music, My Video, My TV, and My Playlists. When you are viewing the Library screen, the following commands appear on Menu. vQ ueue Up: Adds the selected item to the end of the current Now Playing playlist. vD elete from Library: Deletes the selected item from the library. vN ow Playing: Displays the Now Playing screen.
Applications 95
Applications AT&T GPS The AT&T Navigator™ application on your device uses GPS position determination technology and access to your carrier’s data network to provide you with driving directions and a host of other services, including: v GPS navigation that gives you turn-by-turn directions to any destination address in the continental United States. If you miss a turn or get off-track, AT&T Navigator will calculate a new route for you.
Note v In order to improve GPS antenna sensitivity, do not cover the GPS antenna area with your hand. Please hold the handset as depicted in the figure below. owever, if you hold your handset as in the picture shown above your RF antenna sensitivity might be decreased. v Will not be able to obtain a GPS location as a result of being in a restricted GPS signal area such as in a building, underground or location surrounded by metal or concrete.
Applications Launching AT&T Navigator 1. Tap (LG Menu) > Applications > AT&T GPS 2. Tap Tap AT&T Navigator Login After launching AT&T Navigator, Login screen will appear. Your phone number is automatically generated. Your phone number MUST be the same as your carrier phone number beginning with area code so that when you call the Voice Address Input System, you will not need to type it in. Correct the number if it is not accurate. Type in your first and last name and click Login.
AT&T Navigator Menu Overview This section gives you a brief overview of the AT&T Navigator menus. Main Menu The AT&T Navigator Main Menu options are: • Drive To • Directory • Maps • Extras Drive To Menu Applications Use Drive To and select from a variety of ways to navigate to a chosen address. The Drive To Menu options are: • My Favorites - Places that you have found and saved in the past so you can quickly access them.
Applications Directory Menu The Directory menu provides you with a few different ways to find the addresses and phone numbers of businesses such as restaurants, motels, gas stations, churches, schools, government offices, and police and fire stations. You have the following options in the Directory menu: • Spell Name – Type in a keyword for the search. • Recent Searches – Access a list of the businesses you have recently viewed. • Food/Coffee – Search from a variety of categorized restaurants.
Extras Menu The Extras menu gives you options for setting your preferences and other features. The Extras Menu options are: • Share Address – Share an address with friends on their mobile device. • Record Location – Record your current location via GPS. This option is useful when you do not know your exact current address or if you would like to mark an area without a street address. • My Favorites – Manage your Favorites list by renaming or deleting the items.
Applications 4. Click Yes on the Delete Application warning message. 5. Verify that the application is no longer available on the handset menu. Browser Applications 102 With Access Browser, your mobile device can display web site like PC. Default browser for your device is set to Access Browser. In the address bar, enter the web address you want to visit and then tap . Tap the down arrow in the address bar to choose one from previously entered addresses. You can check following menus by tapping Menu.
vE xit: You can exit Access Browser. You can check following menus by tapping Operation. vB ack: Go to web site accessed previously. vF orward: When displaying web sites backwards, display next page of the currently displayed web site. vR eload: Reload the currently displayed web site. vS top: Stop loading current web site. vH ome: Display a web site which URL is set as Home. vB ookmark: Register a web site as Bookmark or display the list of the Bookmark folder.
Applications Calculator The calculator function allows you to add, subtract, multiply and divide. You can input numbers using the number keys, and input operators using button keys. Voice Command Voice command is the function whereby your phone’s voice recognition engine identifies the voice of the user and carries out the requested commands.
4. M essages: this command is activated when the user says the word “messages”. Mobile phone displays details of unread SMS or MMS messages. • commands available to user - yes: make phone call - no: moves next unread messages - cancel: go back to main voice command menu - exit: terminate voice command 5. T ime & Date: this command is activated when the user says the words “time and date”. The phone displays the current local time and date.
Applications Search You can search for files and other items stored on your device in the My Documents folder or on a storage card. You can search by file name or by words located in the item. For example, you can search in e-mail messages, notes, appointments, contacts, and tasks, as well as in online Help. To search for a file or an item 1. Tap (LG Menu) > Applications > Search. 2. In Search for, enter the file name, word, or other information you want to search for. 3.
Sprite Backup Backup Sprite Backup allows to backup to SD Card, Main Memory, PC and FTP. For instructions on using the PC and FTP options, please view these sections. 1. Tap (LG Menu) > Applications > Sprite Backup. 2. Tap Backup. 3. From the Backup Data Selection screen you can customized the backup. You can add/remove items by simply enabling the the check boxes. 4. Press on the Next button to continue with the operation and open the Save As screen. 5.
Applications Restore Sprite Backup allows to Restore from Internal storage such as SD Card, Main Memory, PC and FTP. 1. Tap (LG Menu) > Applications > Sprite Backup. 2. Tap Restore. 3. Sprite Backup will search for all available backup files and display them in Open File screen. 4. From the Open File screen, select the location from the drop down list. For PC and FTP locations you must have an Activesync or Network connection active. 5.
Schedule Sprite Backup allows to Schedule Backup operations to different storage locations such as SD Card, Main Memory, PC and FTP. 1. Tap (LG Menu) > Applications > Sprite Backup. 2. Tap Schedule. 3. Press the Next button to open the Backup Schedule screen. 4. Select a Frequency and enter a valid Date and/or Time for the backup or backups. - 'Once': will start a backup at the designated time and date. - 'Daily': will start a backup at the designated time each day.
Applications Options Sprite Backup provides a number of options to help you manage your backup requirements. v Backup Provides a number of options to help you manage your backup requirements. v Restore Provides different restore options, these options are used to maximized the restore operation. In most cases you will get the best result by using the default option but depending on how complicated is the restore operation sometimes you will need to change these options to get the best result.
Internet Sharing Note v ActiveSync software version 4.5 or higher is required. v Connect the USB cable to the PC. (LG Menu) > Applications > Internet Share. v Set PC Connection to USB or Bluetooth PAN v Set Network Connection to proper APN v Tap Connect in the bottom line v Data connection indicator (G/ E/ 3G) is displayed when PDP activation is performed successfully. v Tap Note v Operating System on your PC is required Windows XP SP2 or later.
Applications Office Mobile Excel Mobile Excel Mobile makes it easy for you to open and edit Excel workbooks and templates created on your PC. You can also can create new workbooks and templates on your device. Note v W ork in full-screen mode to see as much of your workbook as possible. Tap View > Zoom and select a percentage so that you can easily read the worksheet. Unsupported features in Excel Mobile Excel Mobile does not fully support some features such as formulas and cell comments.
v Formulas and functions. If an Excel file contains a function that is not supported by Excel Mobile, the Applications function is removed, and only the returned value of the function appears.
Applications PowerPoint Mobile With PowerPoint Mobile, you can open and view slide show presentations created on your PC in *.ppt and *.pps format with PowerPoint '97 and later. Many presentation elements built into the slide shows such as slide transitions and animations will play back on the device. If the presentation is set up as a timed slide show, one slide will advance to the next automatically. Links to URLs are also supported. PowerPoint features not supported on the device include: v Notes.
Tip v Simply tap the current slide to go to the next one. v If you have zoomed in to see a slide in more detail, you cannot navigate to another slide until you zoom out. Tapping Next or Previous may play an animation on a slide rather than navigate to another slide. Word Mobile Word Mobile is a streamlined version of Microsoft Word. Word documents created on your PC can be opened and edited on your device. You can also create and edit documents and templates in Word Mobile and save them as *.doc, *.
Applications Applications 116 Word Mobile does not fully support some features of Microsoft Word such as revision marks and password protection. Some data and formatting may be lost when you save the document on your device. The following features are not supported in Word Mobile. • Backgrounds • Shapes and text boxes • Artistic page borders • Smart tags • Metafiles vB i-directional text.
The following features are not supported on the device; however, they are retained in the file so that when a file is opened on the PC again, they appear as expected. v Footnotes, endnotes, headers, footers vP age breaks: Word Mobile does not display breaks between pages. However, all page breaks except for breaks at the end of a document are retained in the document. vL ists: When you open the document on the computer again, indented lists are displayed in the original form. v Fonts and font sizes.
Applications Notes Notes helps you to quickly capture thoughts, questions, reminders, to-do lists, and meeting notes. You can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and send notes to others. Entering Information in Notes You can enter typed text by using the on-screen keyboard or handwriting recognition software. You can also use the stylus to write or draw directly on the screen.
To Create a Note 1. Tap (LG Menu) > Applications > Notes. In the note list, tap New. 2. Drawing mode is displayed. Tab the Input Method icon if you want to type the note. 3. You can record the voice by checking View Recording Toolbar from Menu. 4. When finished, tap OK to return to the note list. Tools File Explorer The File Explorer application allows you to open an explorer window similar to a desktop Windows based system.
Applications Java GW600 supports Java and hence you can easily download java games and other java applications from the internet. Mobile Java has 2 subfolders : Games and Applications. Each folder has an embedded link for downloading Games or Applications from the internet . Please note that additional costs may be incurred when using online services. Mobile Zip Mobile Zip is a comprehensive archiving tool for viewing and extracting of a wide range of archiving formats.
Views vH ome view is used mainly as startup page where you learn and set some basic features of the application.
Applications Password Manager Password manager is a password-managing module that facilitates easy but secure password management. The password database file is saved in the application directory as an AES-256 encrypted file based on the master password. If you lose your master password, you lose the password list. In that case you need to use the Delete All command to delete the password list and start anew.
Settings 123
Settings Phone You can edit the general settings related to making and receiving calls. Phone Sounds vR ing type: This option determines the incoming call notification mode. You can select from [Ring], [Increasing ring], [Ring once], [Vibrate], [Vibrate and ring], [Vibrate then ring], [None]. vR ing tone: You can select the ringtone for incoming voice calls. vK eypad: You can set the key tone to be played when pressing the keys.
v Caller ID Scroll to ‘Everyone’ to display your caller identity to the people you call, ‘No one’ to hide it or ‘Only to contacts’ to display your caller identity when you call from the contacts. v Call Forwarding Allows you to forward your incoming calls to another phone number. v Call Waiting To be notified of incoming calls while you have a call in progress, select Notify me.
Settings Tip v M anual selection can be useful when you know that one network is less expensive than another or that it provides faster data transmission. vA utomatic: To have the network selected automatically. Preferred network Tap the Network tab > Set Networks (retrieving settings may take a few minutes). Select a network and re-priorities the order for network usage by tapping Move Up or Move Down. Info. Service Info service messages are text messages sent by the network to GSM phone users.
Today Today Screen Settings The Today screen shows your upcoming appointments, active tasks, and information about e-mail messages. To Synchronise the Today Screen 1. Tap (LG Menu) > Settings > Today. 2. On the Appearance tab, select the desired theme for the background of the Today screen. 3. On the Items tab, select the items you want to appear on the Today screen. Tip v To change the order of items displayed on the Today screen, tap the item, and tap Move Up or Move Down.
Settings To Set Options for Displaying Appointments on the Today Screen If you have a large number of appointments, you may want to specify the kind of appointments that are displayed on the Today screen. 1. Tap (LG Menu) > Settings > Today. 2. Tap the Items tab. 3. Select Calendar(tap on the name Calendar) and tap Options. v Select Next appointment to show only the next appointment in your schedule, or Upcoming appointments to show multiple appointments. v Clear the Display all day events checked.
Sounds & Notifications To Set Sound & Notifications on Actions 1. Tap (LG Menu) > Settings > Sounds & Notifications. 2. On the Sounds tab, choose how you want to be notified by selecting the appropriate drop-down boxes. 3. On the Notifications tab, in Event, tap an event name and choose how you want to be notified by selecting the appropriate drop-down boxes. You can choose from several options, such as a special sound, a message, or a flashing light. 4.
Settings v Tap Wireless Manager in Today screen or (LG Menu) > Settings > wireless Manager. v To turn on Wi-Fi, tap Wi-Fi. A bubble window pops up and shows scanned appropriate Access Points near users. v You can select the Access Point that you are permitted to access and tap OK. v Then select The Internet to have an Internet service and tap Connect. Note If your Wi-Fi service provider or network administrator sets WEP encryption for network security, you should fill in WEP key in the pop-up window.
v If you tap Use specific IP address, you need to set IP address assigned by your WLAN service provider or network administrator. vF ill in IP address, Subnet mask, and Default gateway. vT ap Name Servers. vF ill in DNS and Alt DNS, WINS and Alt WINS, if necessary. Note To prevent from the possible data loss of your phone, WLAN automatically ends when the battery almost runs out at the level of below five percent. To check WLAN status vT ap Start > Settings > Connections tab > Wireless LAN.
Settings Lock There are two kinds of security on your device. You can protect your phone from unauthorized use by assigning a type of password called a PIN (personal identification number). Additionally, you can prevent unauthorized access to any part of the device by using password protection. Your first PIN will be given to you by your wireless service provider; you can change the PIN later. You create your own password when you begin using your device. To Protect your Phone with a PIN 1.
Note v Each time a wrong password is entered, the time the device takes to respond will get longer and longer until the device appears to be not responding. If you forget your password, you must follow the instructions in your owner’s manual to clear memory before you can access your device. To Change your Password 1. Tap (LG Menu) > Settings > Lock. You will be prompted to enter your current password. 2. In the Password box, enter your new password. 3.
Settings Clock & Alarm Time You can view the time, day of the week and date. Tap (LG Menu) > Settings > Clock & Alarms > Time tab. Tap the hour, minutes, or seconds, then tap the up or down arrow to change the time setting. Tap the down arrow in the Date field to display a calendar. Tap a day on the calendar to select the current date. You can tap the left or right arrow at the top of the calendar to move backward or forward through the calendar. Alarm Tap Alarms tap.
Task Manager In most cases, programs automatically close to free needed memory, however, you can close programs manually, if you prefer. 1. Tap (LG Menu) > Settings > Task Manager. 2. You can check the running programs list on Application column and there Memory and CPU information. 3. You can end the programs manually by tapping End Task.
Settings General vC urrent profile: You can save the different bluetooth settings with different profile name. vB luetooth status: Bluetooth Turn On/Off. Accessibility Device Identification vN ame: The name displays on remote device while pairing process. vA ddress: The bluetooth address is displayed. Accessibility vA llow other devices to connect All devices/Paired devices only: You can select if other device can pair with yours or not.
vD iscoverable: Bluetooth is turned on, and all other Bluetooth-enabled devices within a range of 10 meters can detect your device. Note v By default, Bluetooth is turned off. If you turn it on, then turn off your device, Bluetooth also turns off. When you turn on your device again, Bluetooth automatically turns on. To Make your Device Discoverable 1. On your device, tap (LG Menu) > Settings > Bluetooth. 2.
Settings To Accept a Bluetooth Partnership 1. Ensure that Bluetooth is turned on and in discoverable mode. 2. Enter a passkey (the same passkey that is entered on the device requesting the partnership) to establish a secure connection when prompted. The passkey must be between 1 and 16 characters. 3. Tap OK. Note v I f you tap Start > Help in bluetooth settings window, you can use the Help to see the details of Bluetooth profiles. Touch Feedback You can set touch feedback.
Clock Style & Weather You can select the style of Today screen. To Select Clock Style 1. Tap (LG Menu) > Settings > Clock Style & Weather. 2. On the Clock tab, select the desired clock style. 3. You can set dual clock by tapping Dual Clock tab. 4. Check your choice on home screen sceen. To Set Weather Options. 1. Tap (LG Menu) > Settings > Clock Style & Weather. 2. Tap Weather tab 3. Select On for Display on the Today screen if you want to check the weather on the Today screen 4.
Settings ALC(Auto Luminous Control) Sensor If you set On, LCD backlight brightness is automatically adjusted base on the exterior light. Proximity Sensor Once the feature is turned On, the LCD will automatically turn off when in close proximity to your face, allowing you to only adjust the volume or end the call. This function allows you to save power and prevents you from unintentionally activating features during a call. LCD backlight reverts when you are far away from the sensor.
1. TTY Full: - Users who cannot talk and hear send and receive a text message through TTY equipment. 2. TTY Talk: - Users who can talk but cannot hear receive a text message and send voice messages through TTY equipment. 3. TTY Hear: - Users who can hear but cannot talk send a text message and receive voice messages through TTY equipment. 4. TTY Off: - Users send and receive without TTY equipment. Connecting TTY Equipment and a Terminal 1. Connect a TTY cable to the TTY connection on the terminal.
Settings MDM (Mobile Device Manager) MDM enables your device to become managed and an authenticated member of the IT infrastructure of an organization To Enroll your Device in MDM. If you plan to enroll your device in MDM, obtain E-mail address, server URL and password from your system administrator before setting the enrollment. v Tap Start > Setting > Connections tab. v Tap Domain Enroll. v In Domain Enrollment, tap Enroll.
Modem Link Modem Link allows you to use your device as USB modem for another device, such as your notebook computer. Note v B efore activating Modem Link, make sure your device has a GPRS SIM card installed, and you have set up a GPRS modem connections on your device. Also make sure you have GPRS SIM support Modem link, and connected your device to a computer via USB. v When you activate Modem Link, ActiveSync will be disabled automatically.
Settings 4. Plug in the USB cable adapter between your device and the computer. 5. Tag Activate. 6. To add your device as a USB modem onto your computer, follow the steps in “To add your device as a USB modem to the computer.” To add your device as a USB modem to your Computer 1. Plug in the USB cable adapter between your device and the computer. 2. On your computer, click Start > Control Panel. 3. Double-click Phone and Modem Options. 4. Click the Modems tab.
7. Select Connect using a dial-up modem then click Next. 8. Select the modem that you previously installed, then click Next. Note v If you have only one modem, this step does not appear. 9. Enter a descriptive name for this connection, then click Next. 10. If you are connecting to the Internet via GPRS, enter the telephone number as *99# or Vender support number( ex, *99***1#), then click Next. 11. Under Internet Account Information, you may not need to enter a user name and password when using GPRS.
Settings Clear Storage Allows you to remove all your data and files from the memory and reset your device to factory default settings. v Tap Start > Setting > System tab and select Clear Storage. v After entering your password, press the Enter. v Select the check boxes for the types of memory that you want to remove. v Press the Clear. Note v A Hard Reset should only be performed after all other trouble shooting options have been exhausted.
