English LG Electronics BLUETOOTH ® Mono Headset HBM-585 User manual Rev 1.0 US All rights reserved. LG Electronics Inc., 2010 Note: For optimal performance and to prevent any damage to, or misuse of the HBM-585, please read all the information carefully before using the HBM-585 Any modifications or changes to this manual due to typographical errors or inaccuracies of stated information shall only be made by LG Electronics Inc.
Introduction Table of Contents Introduction 3 - Included in the package Description of parts How to use - Change direction - Charging - Low battery - Battery status check - Power on - Power off - Pairing •Easy pairing •Manual pairing - Auto reconnect - Volume control - Calling •Answering a call •Making a call •Voice dialing •Last number redial •Ending a call •Transferring a call •Call waiting •Call Reject - Advanced multipoint Summary of button functions LED indication Troubleshooting Specification Precaut
Description of parts How to use Headset Charging MFB (Multi-Function Button) Speaker Volume Button LED Indicator Charging ontacts - Slide the HBM-585 into the Small Charging Cradle or the Vehicle Power Adaptor. - When the headset is placed into either charging device, the headset will turn off. - While charging, the LED indicator will show a solid white light. - The buttons will not function while the device is charging. - It takes 2 hours to fully charge the headset.
How to use • After 10 seconds, the HBM-585 will automatically enter pairing mode. • When the headset enters pairing mode, the LED indicator will show a solid white light. • Using your handset, find the Bluetooth menu and “search for” or “add” new devices. • Select “LG HBM-585” from the list of devices and pair it with your handset. • If you are asked for the passkey or PIN during pairing, please enter “0000” (4 zeros). • Once pairing has been completed successfully, you will hear "Headset paired".
How to use How to use Voice dialing* - Briefly press the MFB to activate “Voice Command”. For best results, record the voice dialing tag through your headset. NOTE: If your handset does not support voice dialing, this action may activate Last Number Redial. Last number redial* - Press and hold the MFB for 1 second to activate “Last number redial”. The headset will beep and then call the last number dialled. Ending a call - Briefly press the MFB.
Troubleshooting Summary of button functions HBM-585 Status Function Power on Power off Volume Transferring a call Power off Power on Talking Talking Answering a call Ending a call Call waiting Last number redial Voice dialing Ringing Talking Talking Idle Idle (handset must support) Call reject Ringing Pairing mode(Manual) Power off Battery status check Idle Action Does not turn on Press the MFB for 3 seconds. Press the MFB for at least 4 seconds. Briefly press the VOLUME button.
Precautions Do not drop the device. Do not modify, repair, or disassemble. Do not expose directly to water, alcohol, benzene, etc. for cleaning. Do not expose directly to flammables. Do not place or keep the device near flammables. Keep the device away from humidity and dust. Declaration of confirmation FCC NOTICE TO USERS : This device complies with part 15 of the FCC rules.
Additional information 2. Potentially explosive atmosphere Turn off your electronic device when in any area with a potentially explosive atmosphere. Although this is uncommon, your electronic device could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. 3.
Limited warranty Subject to the conditions of this Limited Warranty, LG Electronics warrants this product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. Should your product need warranty service, please return it to the dealer from whom it was purchased or contact your local LG Electronics contact centre to get further information.