(Cover) LG BlueBAND R BHS-200 User Guide Project No.
(Page 0) Contents LG BHS-200 Overview 2 Getting Started 3 Charging Your Earphone Normal Charging Time Talk Time, Music Play Time and Standby Time Low Battery 4-5 Turning Your Earphone On and Off 6 Pairing Your Earphone 7-8 Using Your Earphone Answering a Call Answering a Call when Listening to Stereo Audio Ending a Call Rejecting a Call Dialling from Your Mobile Handset Voice Dialling from Your Earphone Last Number Redial from Your Earphone Listening to Stereo Audio 9-10 Adjusting the Volume 11
(Page 1) LG BHS-200 Overview 3 5 1 2 4 6 7 8 Fig. 1 1. Volume Key (+) 2. Volume Key (-) 3. Forward Key 4. Backward Key 5. 6. 7. 8.
(Page 2) Wearing Your LG BHS-200 Earphone Fig.
Page 3 Charging Your Earphone Fig. 4 The Earphone comes with a built-in rechargeable battery. Prior to using the headset, it is recommendable to charge the battery fully for the first time.
Page 5 Charging Your Earphone Connect the charger to an AC wall outlet and the charger plug to the headset’s charging socket (fig.4). The LED will be red while charging. IMPORTANT Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained. Normal Charging Time Charging the battery fully is normally within 3 hours. When the battery is fully charged, the LED will turn blue and remains on.
Page 6 Turning Your Earphone On and Off Turning On the Earphone Press and hold the MFB for 2 seconds until you hear a short beep. flash blue. The LED will IMPORTANT Press the MFB again each time you turn on the headset to reactivate pairing so that the connection between the headset and the mobile handset is resumed. For pairing, please refer to “Pairing Your Earphone” on page 7-8. Turning Off the Earphone Press and hold the MFB for 3 seconds until you hear a long beep. The LED flash stops.
Page 7 Pairing Your Earphone Up to 1 meter Prior to using your Earphone for the first time, you must pair it with a Bluetooth-enabled mobile handset or Music Player (The “Device”). The information on the next page describes pairing instruction for typical Bluetooth-enabled mobile handset or music player. Earphone pairing procedure is subject to different models of mobile handsets and music player.
Page 8 Pairing Your Earphone 1. Place the Earphone and the device where they are easily viewable by no more than 1 meter apart. 2. Ensure the earphone is OFF. 3. Press and hold the MFB until the earphone Status Indicator alternately flashes blue and red. 4. Activate your mobile handset’s Bluetooth function by referring to your mobile handset user guide for details. 5.
Page 9 Using Your Earphone Answering a Call When there is an incoming call, you will hear ringing through the earphone. Press the MFB to accept the call or answer the call via your mobile handset in the normal way. Answering a Call when Listening to Stereo Audio Press the MFB once to answer the call and when finished, press the MFB once to resume stereo audio. If the other party you are speaking to ends the call, stereo audio will automatically resume without having to pressing the MFB.
Page 10 Using Your Earphone Voice Dialing from Your Earphone If your mobile handset is equipped with a voice dialling function, simply press the MFB on your headset and when you hear a beep, say the voice tag. IMPORTANT Please make sure to record voice tag into the mobile handset first before using voice dialling function. Last Number Redialling from Your Headset Press the MFB on your headset twice. IMPORTANT The above functions are only applicable to mobile handsets with Bluetooth Handsfree Profile.
Page 11 Adjusting the Volume Press the Volume Key repeatedly until you reach the desired volume level. Resetting / Removing the Pairing You may want to reset the headset to its original settings. This also clears all current pairings. 1. Ensure the headset is OFF. 2. Press and hold the Volume Key 20 seconds until the Status Indicator alternately flashes blue and red rapidly. 3. Release the Volume Key. 4. Press and hold the Volume Key again until you hear 2 beeps. 5.
Page 12 Remote Control Function (AVRCP) Play / Pause 1. Press once for start music playing 2. Press once again for pause the music playing Volume Control By pressing the “+” to increase the audio volume. By pressing the “-“ to decrease the audio volume. Total audio level is 12. Forward By scrolling the panel upward to skip next chapter or forward selecting the chapter. Backward By scrolling the panel downward to repeat last chapter or backward selecting the chapter.
Page 13 Care and Maintenance Earphone Consider turning your earphone off before placing it in your pocket or bag. If the MFB is accidentally depressed, your mobile handset may place an unintended call. Do not expose the earphone to liquid, moisture or humidity as it is not waterproof. Do not use abrasive cleaning solvents to clean the earphone. Do not expose the earphone to extremely high or low temperatures. Do not dispose of the earphone in a fire as it will result in explosion.
Page 14 Built-in Battery Do not attempt to replace the earphone’s battery yourself as it is in-built and is not changeable. Charge the battery in accordance with the instruction supplied with this user guide. Only use the manufacturer supplied charger when charging the earphone. Charger Only use the manufacturer supplied charger when charging the earphone. Do not disassemble the charger as it may expose you to dangerous voltages of other risks.
Page 15 Safety Information Check local laws regarding use of a mobile handset and earphone while driving. If you use the earphone while driving, ensure your attention and focus remains on your responsibility of driving safely. Never allow children to play with the earphone – small parts may be a choking hazard. Observe all signs that require an electrical device or RF radio product to be switched off in designated areas.
Page 16 Troubleshooting If you are unable to connect your earphone and mobile handset, please try the following: Ensure your earphone is turned off and is properly charged. Ensure the earphone is paired with your mobile handset. Ensure your mobile handset’s Bluetooth feature is activated. Please refer to your mobile handset user guide for specific instruction.
Page 17 Declaration of Conformity (DOC) We, i.Tech Dynamic Ltd., declare that the following product: Product Name: LG BHS-200 Model No.: C51-A05133-XX Is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Article 3.1a, 3.1.b and 3.2. and the product is manufactured in accordance with Annex II of the above directive. A copy of the Declaration of Conformity can be found at: http://www.itechdynamic.
Page 18 Product Specifications Bluetooth Specification: Version 1.2 Class 2 Bluetooth Profile Supported: Earphone, Handsfree, A2DP and AVRCP Range of Frequency: 2.4GHz Spectrum Dimensions: ??? mm (L) x ??? mm (W) x ??? mm (H) Nominal Charging Time: Within 3 hours Talk Time*: Up to 7.5 hours Music Play Time*: Up to 7.
(Back Cover) © 2005 Hutchison Harbour Ring Enterprises Limited All rights in this publication are reserved and no part may be reproduced without the prior written permission of the publisher. The contents of this publication are believed to be correct at the time of going to press, but any information, specifications, products or services mentioned may be modified, supplemented or withdrawn without further notice. The Stylized i.