Order Number : GETEC-C1-10-210 FCC Part 15 subpart B Test Report Number : GETEC-E3-10-108 Page 1 / 1 APPENDIX G : USER’S MANUAL EUT Type: Digital Signage Display FCC ID.
nd Draft HP LD4201, LD4210 and LD4710 Digital Signage Displays User Guide
2nd Draft © 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft®, Windows®, Windows® XP, and Windows Vista® are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
2nd Draft About this guide This guide provides information on setting up the display, installing drivers, using the On-Screen Display menu, troubleshooting, and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.
2nd Draft iv About this guide ENWW
Draft Table of contents 1 Product features ............................................................................................................................................. 1 HP Digital Signage models ................................................................................................................... 1 Accessories .......................................................................................................................................... 2 Optional accessories ......
2nd Draft Downloading from the Web ............................................................................................... 28 Using the auto-adjustment function (RGB INPUT source only) ......................................................... 29 Using the On-Screen Display menu ................................................................................................... 30 Using the remote control to adjust the OSD ......................................................................
2nd Draft Display and group management ........................................................................................................ 60 Making a group .................................................................................................................. 60 Adding a display to group .................................................................................................. 60 Viewing group information ..............................................................................
2nd Draft Auto Off ............................................................................................................. 66 Power On Delay ................................................................................................ 66 Energy Saving ................................................................................................... 67 Factory Reset .................................................................................................... 67 Scheduling ...................
2nd Draft Appendix B Technical specifications ............................................................................................................ 85 HP Digital Signage Display ................................................................................................................ 85 HP LD4201 and HP LD4210 dimensions ........................................................................................... 88 HP LD4710 dimensions ............................................................
2nd Draft 29. Fan Fault check (Command : d w ) ............................................................................ 114 30. Elapsed time return (Command : d l) ......................................................................... 114 31. Temperature value (Command : d n) ......................................................................... 115 32. Lamp fault Check (Command : d p) ........................................................................... 115 33. Auto volume (Command : d u) .
2nd Draft Japanese power cord requirements ................................................................................ 134 Product environmental notices ......................................................................................................... 134 Materials disposal ............................................................................................................ 134 Disposal of waste equipment by users in private households in the European Union .... 134 Chemical substances ..
2nd Draft xii ENWW
2nd Draft 1 Product features HP Digital Signage models The HP LCD digital signage displays have a wide aspect active matrix thin-film transistor (TFT) panel. The displays features include the following: ENWW ł HP LD4201 model, 106.7 cm (42-inch diagonal) widescreen viewable area display with 1920 x 1080 native resolution ł HP LD4210 model, 106.7 cm (42-inch diagonal) widescreen viewable area display with 1920 x 1080 native resolution ł HP LD4710 model, 119.
2nd Draft Accessories ł Software and documentation CD ł Remote control ł Power cable ł DisplayPort cable ł HDMI cable ł RGB (VGA) cable Optional accessories Optional accessories (purchased separately) might vary depending on the model.
2nd Draft 2 Safety and maintenance guidelines Important safety information A power cord is included with the display. If another cord is used, use only a power source and connection appropriate for this display. For information on the correct power cord set to use with the display, refer to the Power cord set requirements on page 134. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature.
2nd Draft Maintenance guidelines To enhance the performance and extend the life of the display: ł Do not open the display cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the display is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider.
2nd Draft Cleaning the display 1. Turn off the display and unplug the power cord from the back of the unit. 2. Dust the display by wiping the screen and the cabinet with a soft, clean antistatic cloth. 3. For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol. CAUTION: Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen surface. Never spray the cleaner directly on the screen surface. It might seep behind the bezel and damage the electronics.
2nd Draft 6 Chapter 2 Safety and maintenance guidelines ENWW
2nd Draft 3 Setting up the display To set up the display, ensure that the power is turned off to the display, media player/computer system, and other attached devices, and then follow the instructions below. Installing the stand (sold separately) 1. [Author note:]Update this stand section to show differences between the 42 and 47 models. David N. as the screw measurements as 42” =33mm (1 5/16”) and 47”=17mm (5/8 “) with a washer, but Brian D. has LGE guide that says 42”=30mm and 47”=10mm.
2nd Draft 2. Place a soft cloth on the table and place the display with the screen facing downward. Connect the stand as shown in the following figure. Figure 3-2 Sliding the stand onto the display 3. Use the screws to secure the stand on the rear side of the product as shown in the figure.
2nd Draft Connecting the speakers (sold separately) 1. Mount the speakers onto the display. Figure 3-4 Mounting the speakers 2. Use the four Taptite D3 x 12 mm (0.47 in) screws to secure the speakers to the display.
2nd Draft 3. After installing the speakers, use the cable holders and cable ties (available on select models) to organize the speaker cables.
2nd Draft 4. After installing the speakers, connect the input terminal with a proper color match. Figure 3-8 Connecting to the input terminal Rotating to the portrait position When installing the display in the portrait position, rotate it clockwise based on its front. The display can be rotated in only one direction. NOTE: The display cannot be rotated if it is installed on the stand.
2nd Draft Using the remote control Inserting the batteries (sold separately) 1. Slide off the battery cover. 2. Insert the batteries with correct polarity (+/-). 3. Close the battery cover. NOTE: To prevent environmental pollution, dispose of used batteries in accordance with your local recycling guidelines.
2nd Draft Identifying remote control buttons Figure 3-11 Remote control buttons[Author note:]Graphic is being updated — component 4 and 16 are not supported and component 20 is now USB instead of S.Menu 1 2 14 SAVING .
2nd Draft Component Function 10 OK Accepts a selection or displays the current mode 11 BACK Navigates one step back in an interactive application 12 ID ON or OFF Enables the display lock 13 USB menu control buttons Use with the HP Media Sign Player option lists in the USB menu 14 ENERGY SAVING Adjusts the Energy Saving mode 15 INPUT Opens the Input Source menu options (RGB, HDMI/DVI, and DisplayPort) 16 Not supported 17 ARC Selects the Aspect Ratio converter mode 18 BRIGHTNESS Adj
Draft Identifying display components Figure 3-12 Display components[Author note:]Update graphic —need new front and back component graphics with callouts. 6 7 1 2 3 4 5 Component Function 1 Toggles between video inputs: SOURCE ł HDMI/DVI - Digital signal ł RGB - 15-pin D-Sub analog signal ł DisplayPort 2 MENU Opens or closes the OSD (On-Screen Display) menu screen. 3 OSD select/adjust buttons Selects an OSD menu icon or adjusts the settings in the OSD screen.
2nd Draft Figure 3-13 Display ports 1 2 3 4 5 6 7 8 Component Function 1 AC-IN power AC-IN connects the AC power cord to the display. 2 RS-232-C (Control) serial ports RS-232-C (Control) serial ports connect to RS-232 devices 3 HDMI/DVI, RGB IN, and RGB OUT HDMI supports High Definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals. DVI input is supported with an HDMI to DVI signal cable (not included).
2nd Draft VESA mounting support and security slot VESA FDMI (Video Electronics Standards Association Flat Display Mounting Interface) wall mounting—This product supports a VESA FDMI-compliant mounting device. The mounting devices can be purchased separately from HP. Security cable provision—To help prevent theft, a security cable provision is available on the rear of the display. The cable and lock required to connect to the display are available separately and can be purchased from HP.
2nd Draft Connecting to external devices 1. Be sure that the display, media player/computer, and all attached devices are turned off. 2. Connect the signal input cable. For additional information, see one of the following signal input cable sections: Connecting RGB on page 20 ł 3.
Draft 5. Turn on power to the display by pressing the power button. Figure 3-17 Power button[Author note:]Update graphic-Needs a new graphic of front of display. 6. Turn on the media player/computer. 7. Select an input signal. Press the INPUT button on the remote control to open the Input List, select the appropriate input signal (RGB, HDMI/DVI, DP), and then press the OK button to save your change.
2nd Draft Connecting RGB 1. For analog operation, connect the D-Sub signal cable to the RGB IN (1) connector on the rear of the display and the other end to the connector (2) on the media player/computer. NOTE: If connecting to a Mac media player/computer, use the standard Mac adapter (3)—not included. Figure 3-18 Connecting the D-Sub signal cable 2 1 3 2.
2nd Draft Press the INPUT button on the remote control, select the DP input signal, and then press the OK button to save. Or, press the SOURCE button on the back of the display, select the DP input signal from the Input List, and then press the AUTO/SET button to save. Connecting HDMI (480p/576p/720p/1080i/1080p) HDMI supports High Definition Input and HDCP. Some devices require HDCP in order to display HD signals. 1.
2nd Draft ł Connect the HDMI to HDMI signal cable (not included) to the HDMI/DVI (1) connector on the rear of the display and the other end to the HDMI connector (2) on the media player/ computer. Figure 3-22 Connecting the HDMI to HDMI signal cable[Author note:]Create graphic for HDMI to HDMI? 2. Select an input signal. Press the INPUT button on the remote control, select the HDMI/DVI input signal, and then press the OK button to save.
2nd Draft on the connected media player/computer to assign an IP address to the monitor, change monitor settings, and set up HP Media Sign Player options, play lists, and On/Off schedule times. 1. Connect the LAN cable (not included) using one of the following connections: ł Computer Direct Connection—Connect the LAN cable to the LAN port on the display and to the LAN port on the media player/computer (1). ł Router—Connect the LAN cable to the LAN port on the display and to a LAN port on the router (2).
2nd Draft Connecting daisy chain displays Multiple monitors (up to 25) can be connected in a daisy chain (connect several monitors together in tile mode) to a computer using DisplayPort IN/OUT or with the combination of RGB IN/OUT and RS-232-C IN/OUT ports on the display. To connect displays in a daisy chain, the displays must all be connected with the same input/output source (DisplayPort IN/OUT or RGB IN/OUT and RS-232-C IN/OUT) as shown in the figures below.
2nd Draft Figure 3-27 Daisy chain connection—DisplayPort for video input signal and RS-232-C for display command and control[Author note:]Create graphic for daisy chain DisplayPort and RS-232–C? ENWW Connecting daisy chain displays 25
2nd Draft 26 Chapter 3 Setting up the display ENWW
2nd Draft 4 Operating the display Software and utilities HP displays are Plug-and-Play with Windows® XP, Windows Vista®, and Windows 7 operating systems, so you do not need to download the .INF file or the .ICM file for these operating systems. The most current versions of the following software and utilities can be downloaded from the following HP website for use with the displays as needed: www.xxxx.com. ł Auto-adjustment Pattern Utility—optimizes the display.
2nd Draft Installing the .INF and .ICM files You can install the .INF and .ICM files from the CD or download them from the HP displays support website. Installing from the CD To install the .INF and .ICM files on the media player/computer from the CD: 1. Insert the CD in the media player/computer CD-ROM drive. The CD menu appears. 2. View the Display Driver Readme file. 3. Select Install display driver software. 4. Follow the on-screen instructions. 5.
2nd Draft Using the auto-adjustment function (RGB INPUT source only) You can optimize the screen performance by using the AUTO/SET button on the display (AUTO button on the remote control) and the Auto-adjustment Pattern Utility software on the CD provided. NOTE: Do not use this procedure if the display is set to use a DisplayPort or HDMI/DVI input source.
2nd Draft Using the On-Screen Display menu The display settings can be adjusted from the On-Screen Display (OSD) menu.
2nd Draft OSD menu selections The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. Icon Main menu Submenu Description PICTURE Aspect Ratio Selects from the following screen image sizes: Energy Saving ENWW ł 16:9—widescreen mode. ł 1:1—the picture format is 1:1 aspect ratio. ł Just Scan—allows you to enjoy the transmitted data fully without any images cut off. (This menu is activated only in 720p and 1080i in Component mode.
2nd Draft Icon Main menu Submenu Description Picture Mode Select from the following screen presets: ł Standard—the most general and natural screen display status. ł Vivid—select to display with a sharp image. ł Cinema—lowers brightness by one level. ł Sport—displays with a soft image. ł Game—to enjoy dynamic image when playing a game. ł Expert 1 and Expert 2—allows user-defined settings: Ń Backlight—controls the brightness of the screen, adjust the brightness of the LCD panel.
2nd Draft Icon Main menu Submenu Description Advanced Control Select from the following screen color adjustment settings: ł Ń Cool—slightly purplish white. Ń Medium—slightly bluish white. Ń Warm—slightly reddish white. ł Dynamic Contrast—optimizes the contrast automatically according to the brightness of the reflection. ł Dynamic Color—adjusts the color of the reflection automatically to reproduce natural colurs as close as possible.
Draft Icon Main menu Submenu Description Expert 1 and Expert 2 Select from the following settings: ł Dynamic Contrast—optimizes the contrast automatically according to the brightness of the reflection. ł Noise Reduction—removes the noise up to the point where it does not damage the original picture. ł Gamma—set your own gamma value. On the display, high gamma values display whitish images and low gamma values display high contrast images.
2nd Draft Icon Main menu Submenu Description Clear Voice II Differentiates the human sound range from other sounds, which helps to make the human voices easier to hear. To use this feature, select On; to turn off the feature, select Off. Balance Balances sound between the left and right speakers. Sound Mode Automatically selects the best sound tone quality, depending on the video type that you are currently watching, from the following options: ł Standard—most commanding and natural audio.
2nd Draft Icon Main menu Submenu Description Key Lock Sets up the display so that it can only be used with the remote control. This feature can prevent unauthorized viewing. TILE Set ID Use to assign a unique Set ID NO (name assignment) to each product when several products are connected for display. ISM Method Image Sticking Minimalization Method—avoids allowing a fixed or burn-in image to remain on the screen for a long period of time.
2nd Draft Icon Main menu USB Submenu Description V Size Adjusts the vertical size of the screen taking into account the size of the bezel. H Position Moves the screen position horizontally. V Position Moves the screen position vertically. Reset Resets the Tile Mode configuration. Photo List View photo files on a USB storage device. Music List Play music files on a USB storage device. Movie List Play movie files on a USB storage device. Lock System Sets the password function to On or Off.
2nd Draft Clock The Clock menu allows you to reset the clock manually if the current time is incorrect. 1. Press the MENU button, and then use the down arrow or up arrow button to select the TIME menu. 2. Press the right arrow button, and then use the down arrow or up arrow button to select the Clock menu. 3. Press the right arrow button, and then use the down arrow or up arrow button to set the hour (00h–23h). 4.
2nd Draft 3. Press the right arrow button, and then use the down arrow or up arrow button to set the hour (00h–23h). 4. Press the right arrow button, and then use the down arrow or up arrow button to set the minutes (00–59 min). NOTE: In the event of a power interruption (disconnection or power failure), the Sleep Timer clock must be reset. Auto Off To set the display to switch to the off mode automatically after 10 minutes if Auto Off is active and there is no input signal: 1.
2nd Draft Using ISM Method A frozen or still picture from a media player/computer/Video game that appears on the screen for a prolonged period of time could result in a ghost image remaining even when you change the image. To avoid a fixed or burn-in image to remain on the screen for a long period of time: 1. Press the MENU button, and then use the down arrow or up arrow button to select the OPTION menu. 2.
2nd Draft 5 Using the HP Media Sign Player [Author note:]The content for this section came from pages 34–37 of the 1st Draft of this User Guide- per Brian Dodge. When you connect a USB storage device, the MY MEDIA menu appears with the options Photo List, Music List, or Movie List. NOTE: The MY MEDIA menu will not be displayed while the OSD is active, including the Menu, EPG, or Schedule list. CAUTION: Back up important files on the USB storage device before using with the display.
2nd Draft 42 ł Data in a USB storage device cannot be aligned. Up to 128 English characters can be recognized as a file name. ł If the USB is connected in Standby Mode, the USB device might be detected when the display is turned on. ł The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory. Any device with more than the recommended capacity might not work properly.
Draft Using Photo List Use Photo List to view photo files on a USB storage device. Information about using Photo List PHOTO (*.JPEG) supporting file ł ł Baseline—15360 x 8640 ł Progressive—1024 x 768 ł You can view JPEG files only; non-supported files are displayed in the form of a bitmap.
2nd Draft Using Music List Use Music List to play music files on a USB storage device. NOTE: If you do not select any button for a while, the play information box will float as a screen saver. Press the OK button to stop the screen saver. Information about using Music List MUSIC (*.MP3) supporting file—Purchased music files (*.MP3) might contain copyright ł restrictions; playback of these files might not be supported. ł Damaged or corrupted music does not play but displays 00:00 in playtime.
2nd Draft Using Movie List Use Movie List to play movie files on a USB storage device. Information about using Movie List MOVIE (*.avi) supporting file ł ł Video format—MPEG1, MPEG2, MPEG4 (does not support Microsoft MPEG 4-V2, V3) ł Audio format—Mpeg, Mp3, PCM, Dolby Digital ł Sampling frequency—within 32k to 48 khz ł Bit rate—32k to 320 kbps ł Subtitle format—*.smi/ *.srt/ *.sub (MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.
Draft Table 5-1 Using the remote control for movies Reverse and Fast Forward buttons When the movie is in play mode, press the Reverse button repeatedly to increase the reverse speed (x2) (x4) (x8) (x16) (x32) . Press the Fast Forward button repeatedly to increase the forward speed (x2) (x4) (x8) (x16) (x32).
Draft 6 Installing HP Network Sign Manager NOTE: The HP Network Sign Manager is available only for the HP LD4210 and HP LD4710 Digital Signage Displays. HP Network Sign Manager is a digital signage solution that consists of the signage display and management software that supports a network connection to a commercial display and combines the conventional USB playback feature to allow users to easily and simply enjoy media content at any time they want.
2nd Draft Signage display The signage display has a built-in Ethernet network interface card to play different media files simultaneously from different displays connected to the Internet or the local network and to control the settings for each display separately.
2nd Draft System requirements CPU P1.
Draft Features 50 ł Integrated Control of LAN and Serial Communications—Ensures to easily manage the display connected to the local network and serial communications. ł Wide Area Network (WAN) Control—Efficiently controls the displays even at remote sites through WAN such as Internet. ł Automatic Search for displays on the Same Network—Automatically searches, adds, and manages displays connected to the same network such as HP Network Sign Manager.
Draft Environment setup The HP Network Sign Manager environment setup refers to connecting your signage display and the HP Network Sign Manager program to the network. There are three networking methods supported for the HP Network Sign Manager network setup: ł Local Area Network (LAN) ł Wide Area Network (WAN) ł RS-232 Serial Communication Connecting a display via LAN or WAN You can connect the display to the network directly or indirectly via a router, hub, or switch.
2nd Draft Connecting a display via RS-232-C serial port Directly connect the display to the media player/computer where HP Network Sign Manager is installed using an RS-232-C cable (sold separately). To connect more than one display to the media player/computer, connect the first monitor to the media player/computer with an RS-232-C cable, and then connect the rest of the displays with an RS-232-C cable. Would this “Connecting ...
2nd Draft HP Network Sign Manager installation Install HP Network Sign Manager on the media player/computer to be connected with the display and to the network. HP Network Sign Manager installed on your media player/computer allows you to control the display options and playback schedule. Installing HP Network Sign Manager 1. Insert the HP Software and Documentation CD, that comes with the display, into the CD-ROM. The HP Network Sign Manager Installation screen appears. 2.
Draft Quick overview HP Network Sign Manager is a network-based integrated solution management program supporting various features, including digital signage display control, image/video playback, and remote control. Home screen [Author note:]Need screen shot of Home screen A Toolbar Provides functions commonly used in HP Network Sign Manager such as networked display search/connection and communication configuration. B Monitor Register Window Adds and manages networked displays.
2nd Draft Control tab Table 6-2 The control tabs control the settings of the selected display.[Author note:]Do you want a single graphic with callouts or individual graphics in the left column of the table? Information displays information on the hardware, network, status, and failures of the display. Control is used to control the power, input, volume, and OSD display settings of the display. A/V is used to change the sound and video settings of the display.
2nd Draft Log-in The Log-in dialog appears when HP Network Sign Manager starts. You must log in to use HP Network Sign Manager. Enter your ID and password in the Log-in dialog, and then click OK. Then, you are returned to the main window of HP Network Sign Manager. NOTE: The ID and password are case-sensitive. The default ID and password for HP Network Sign Manager are “Administrator” and “0000” respectively. You can change the password.
2nd Draft Connection settings HP Network Sign Manager supports both Ethernet and serial communications to connect to the display. The following sections describe how to configure communication in HP Network Sign Manager. Ethernet communication settings 1. Click Setting on the toolbar of HP Network Sign Manager. The Setting dialog appears. 2. Select Network under Communication Select, and then click OK. 3. Click Yes to confirm and save the settings. The program exits upon confirmation.
2nd Draft Display registration HP Network Sign Manager allows you to add and manage multiple monitors with both Ethernet and serial communications. Registering a networked display The following describes how to add a monitor with Ethernet communication. 1. Click Search on the toolbar. The Signage Monitor Search dialog appears. 2. Specify a Search Method in the Signage Monitor Search dialog.
2nd Draft Registering a display via serial communication No extra search for displays is required when they are connected via serial communication using HP Network Sign Manager. All displays connected via serial communication are displayed in the Add Monitor pane. A display connected via serial communication must have an ID assigned. HP Network Sign Manager uses this ID to communicate with the display connected to the computer using the serial cable.
2nd Draft Display and group management HP Network Sign Manager supports to group and manage the monitors added in the Add Monitor pane. [Author note:]This sentence is confusing; what should it say? Making a group The following describes how to create a monitor group: 1. Right-click the group in the Add Monitor pane. The shortcut menu appears. 2. Click Make Group. The Make Group dialog appears. 3. Enter a group name in the Make Group dialog, and then click Set.
Draft G FAN Displays the fan settings of the monitors included in the selected group. H LAMP Displays the lamp settings of the monitors included in the selected group. I Temp Displays the temperature settings of the monitors included in the selected group. Deleting a group You can delete a monitor and group added in the Add Monitor pane. The following sections describe how to delete a monitor and group. Deleting a group 1. Right-click a group to delete. The shortcut menu appears. 2.
2nd Draft Display configuration HP Network Sign Manager can remotely control the connected monitors and changes their settings. Viewing information You can see details of the display configuration in the Information tab. Display The Display section shows the basic information on the selected display. Item Description Model Name Name Serial Number Serial number Monitor SW Version Software version LAN SW Version Software version of LAN.
2nd Draft Diagnosis The Diagnosis section shows display activities and failures. Item Description FAN Fan status Lamp Lamp status Power Power status. Temperature (inside) Temperature inside the display Controlling a display The Control tab allows you to control the selected display. Power You can turn the display on or off with a mouse-click under Power. The color of the button changes depending on the display status.
2nd Draft Screen Mute Screen Mute is used to turn on or off the screen. Set to Mute On to play the sound only (no image/ video on the screen). Volume Mute Volume Mute is used to turn on or off the sound. Set to Mute On to play the image/video only on the screen without sound. OSD Select OSD Select is used to turn on or off the OSD (on-screen display) of the display. Set to OSD Select Off to not have the OSD appear on the screen.
2nd Draft Sharpness Sharpness is used to adjust the position of the slider between 0 and 100 to set the sharpness of the screen. Color Temperature (White Balance) Color Temperature (White Balance) is used to change the color temperature of the screen. You can choose one from Normal (6500K), Cool (9300K), and Warm (5000K). Auto Config Auto Config is used to automatically configure the screen settings.
2nd Draft There are four ISM methods available in the display: Image Sticking Method Description Normal Does not use the ISM method. White Wash Refreshes the screen into white to remove the ghost image. Orbiter Moves the screen up/down/left/right every 2 minutes to remove the ghost image. Inversion Inverts the current screen color to remove the ghost image. Power indicator Power Indicator is used to enable or disable the power indicator of the display.
2nd Draft Energy Saving Energy Saving is used to change the energy-saving mode. Factory Reset Factory Reset is used to reset the display to the factory default settings. Be careful with this option because all settings will be reset. Scheduling The Schedule tab allows you to schedule the power on and off of the display. Clock Clock is used to set the current time of the display. ł Select hour/minute/day, and then click Set to complete the time setting.
2nd Draft Saving and loading display configuration All display settings set in HP Network Sign Manager can be saved as a file. You can import the saved settings later when necessary. Saving display configuration The following describes how to save the current display settings: 1. Right-click a display for which the settings are to be saved. 2. Click Save Configuration from the shortcut menu. The Save As... dialog appears. 3. Enter a file name, and then click Save.
2nd Draft Tile Mode The Tile mode allows you to connect more than one display and play a single media file simultaneously from these connected displays. Creating a tile mode 1. Select the Tile tab. The Tile Mode Wizard appears as shown below. 2. To create a new tile mode, select Create Tile Mode. To modify a previous tile mode, select Adjust Tile Mode. 3. Select the number of columns and rows to create for the tile mode. 4. Select a display group to apply the tile matrix, and then click Set.
2nd Draft Schedule and Playback contents (USB) This function allows you to set the playback schedule of HP Network Sign Manager. All files to play should be saved in a separate USB device and then connected to the USB port on the display. The playback schedule can be set to weekday, weekend, day of week, or daily. Scheduling the playback of files Set the playback schedule of HP Network Sign Manager.
2nd Draft Repetition option Description Mon Plays the file for the specified time period on Monday. Tue Plays the file for the specified time period on Tuesday. Wed Plays the file for the specified time period on Wednesday. Thu Plays the file for the specified time period on Thursday. Fri Plays the file for the specified time period on Friday. Sat Plays the file for the specified time period on Saturday. ł Apply—Saves the playback schedule.
2nd Draft 4. Select the file(s) to schedule the playback, and then click Add Schedule List. The files are now added to Schedule List. Use Select All and Clear All to easily select and deselect the files. 5. Change the playback order of the files in Schedule List using Up and Down. 6. Set the playback schedule option. 7. Set the playback start and end times between 00:00 and 23:59. NOTE: You do not have to set the playback duration if Repeat Set is set to Always. 8.
2nd Draft 6. Use Up, Down, Delete, and Delete All to set the playback order or delete the file(s). NOTE: Up to 31 characters are allowed for the file name. Up to 80 files are added to the file list. 7. Select an option in the Repeat Set drop-down list to set the playback repetition pattern. 8. Set the playback start and end times between 00:00 and 23:59. NOTE: You do not have to set the playback duration if Repeat Set is set to Always. 9. Click Export. The .
2nd Draft Toolbar The toolbar has a collection of useful functions. Search Search searches the display(s) connected to the network and adds them. NOTE: Displays connected to serial communication will not be detected. Setting Setting allows you to set a communication method to connect to the signage display. You can select either Ethernet (Network) or RS-232 serial communication depending on your environment. NOTE: Ethernet Network To use Ethernet (network) communication: 1.
2nd Draft The following describes how to reconnect a specified monitor to the network. 1. Select a display or display group to reconnect. 2. Click Connect. NOTE: This function does not support a display connected with serial communication. Refresh Refresh is used to refresh the information in the selected control tab. For example, select the Information tab, and then click Refresh. The information for the selected display or display group is updated.
2nd Draft Alarm Alarm is used to automatically send an alert email to the administrator if an error is detected during self-diagnosis. This function is activated when: ł The network connection is not normal (except for serial communication). ł An error in the fan, lamp, or temperature is detected during self-diagnosis. ł The ID or password is changed. Before using this function, you need to configure the SMTP email settings. The following describes how to configure the SMTP email: 1.
2nd Draft NOTE: The default ID and password of HP Network Sign Manager are Administrator and 0000 respectively. 4. Click Change to apply changes. You should use the changed ID and password the next time that you log into HP Network Sign Manager. NOTE: If you forgot the ID or password, you should reinstall the HP Network Sign Manager program to reset the administrator account. Help Help displays information about the HP Network Sign Manager program.
2nd Draft Log history All events that occurs in HP Network Sign Manager, including button operations, network connection history, and display failures, are automatically saved in a log file. Log data Item Description Date The date when the event is generated. Time The time when the event is generated. IP Address The IP address of the display from which the event is generated. Operation The operation when the event is generated.
2nd Draft Upgrade HP Network Sign Manager supports firmware upgrades for the display. The following describes how to upgrade the display firmware in HP Network Sign Manager: ENWW 1. Under Add Monitor, click a display for which the firmware is to be upgraded. 2. Click the Upgrade tab. 3. In the Upgrade Item drop-down list, select the device to upgrade. ł Ethernet—Firmware for the Ethernet network card installed in the display ł Monitor—Firmware for the display 4.
2nd Draft 80 Chapter 6 Installing HP Network Sign Manager ENWW
2nd Draft A Troubleshooting Solving common problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible cause Solution No image is displayed. Power cord is not connected. Be sure the power cord is properly connected to the outlet. ł Verify that the outlet has power to it. ł Check that the fuse or breaker has not tripped or burned out. See if the power switch is turned on. Might need service.
2nd Draft Problem Possible cause Solution Unknown Product message appears when the display is connected. Display driver is not installed. Install the display driver, which is provided with the display or download from the HP website www.hp.com. Key Lock On message appears when pressing the Menu button. Key Lock function is turned on. The control locking function prevents unintentional OSD setting changes.
2nd Draft Problem Possible cause Solution Black spots appear on the screen. Black spots are characteristics of the LCD panel. Several pixels (red, green, white, or black color) might appear on the screen, which can be attributable to the unique characteristics of the LCD panel. It is not a malfunction of the LCD. The power is suddenly turned off. Sleep timer setting is turned on, or power is interrupted. Check that the sleep timer is set. Check the power control settings.
2nd Draft 84 Appendix A Troubleshooting ENWW
Draft B Technical specifications NOTE: All performance specifications are provided by the component manufacturers. Performance specifications represent the highest specification of all HP's component manufacturers' typical level specifications for performance and actual performance might vary either higher or lower. HP Digital Signage Display Table B-1 Specifications HP LD4201 HP LD4210 HP LD4710 Size 106.73 cm (42 in) 106.73 cm (42 in) 119.
2nd Draft Table B-1 Specifications (continued) Power consumption Resolution— maximum HP LD4201 HP LD4210 HP LD4710 On mode 220 W Typical 220 W Typical 270 W Typical Sleep mode 1 W (RGB) / 2 W (HDMI/ DVI) 1 W (RGB) / 2 W (HDMI/ DVI) 1 W (RGB) / 2 W (HDMI/ DVI) (if LAN OFF is selected) (if LAN OFF is selected) RGB 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz HDMI/DVI 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 1920 x 10800 @ 60 Hz (if supported by OS or video card type
2nd Draft Table B-1 Specifications (continued) Audio (select models) ENWW HP LD4201 HP LD4210 HP LD4710 RMS audio output 10 W + 10 W (R + L) 10 W + 10 W (R + L) 10 W + 10 W (R + L) Input sensitivity 0.7 Vrms 0.7 Vrms 0.
2nd Draft HP LD4201 and HP LD4210 dimensions Figure B-1 HP LD4201 and HP LD4210—Front and side view 121 mm (4.76 in) 67.4 mm (2.65 in) 933.2 mm (36.74 in) 16.9 mm (.66 in) 69.6 mm (2.74in) 75.2 mm (2.96 in) 16.9 mm (.66 in) 559.8 mm (22.03 in) 526 mm (20.7 in) 16.9 mm (.66 in) 967 mm (38 in) 123.7 mm (4.87 in) 620.5 mm (24.43 in) 64.5 mm (2.54 in) 70.41 mm 258.61 mm (2.77 in) (10.18 in) Figure B-2 HP LD4201 and HP LD4210—Back view 855.1 mm (33.66 in) 400 mm (15.75 in) 113.9 mm (4.
2nd Draft HP LD4710 dimensions Figure B-3 HP LD4710—Front and side view 94.3 mm (3.71 in) 1043.7 mm (41.09 in) 72.9 mm (2.87 in) 17.9 mm (.70 in) 1079.5 mm (42.5 in) 122.9 mm (4.84 in) 129.2 mm (5.09 in) 86.9 mm (3.42 in) 73.1 mm (2.88 in) 17.9 mm (.70 in) 624.6 mm (24.59 in) 17.9 mm (.70 in) 588.7 mm (23.18 in) 111 mm (4.37 in) 114.4 mm (4.50 in) 298.3 mm (11.74 in) Figure B-4 HP LD4710—Back view 962 mm (37.87 in) 800 mm (31.50 in) 400 mm (15.75 in) 332 mm (13.07 in) 146.3 mm (5.
Draft Recognizing preset display resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This display automatically recognizes these preset modes and they will appear properly sized and centered on the screen. Preset display modes Table B-2 Factory preset display modes Preset Pixel format Horizontal frequency (kHz) Vertical Frequency (Hz) 1 640 x 350 31.469 70.8 2 720 x 400 31.468 70.8 *3 640 x 480 31.469 59.94 4 640 x 480 37.
2nd Draft HDMI/DVI (DTV) DisplayPort 576p o o 720p o o 1080i o o 1080p o o NOTE: DTV/PC selection on HDMI/DVI inputs is available for media player/computer resolutions— 640 x 480/60 Hz, 1280 x 720/60 Hz, 1920 x 1080/60 Hz and DTV resolutions—480p, 720p, 1080p.
2nd Draft 92 Appendix B Technical specifications ENWW
2nd Draft C Command reference Use this method to connect several displays to a single media player/computer. You can control several displays at a time by connecting them to a single media player/computer. Connecting the cable Connect the RS-232-C cable as shown in the following illustration. The RS-232-C protocol is used for communication between the media player/computer and the display. You can turn the display on/off, select an input source or adjust the OSD menu from the media player/computer.
2nd Draft CTS 7-Wire configurations 3-Wire configurations (Standard RS-232-C cable) (Not Standard) 8 7 RTS CTS 8 8 D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 (Female) (Female) (Female) (Female) RTS Communication parameter ł Baud Rate—9600 baud Rate (UART) ł Data Length—8 bit ł Parity Bit—None ł Stop Bit—1 bit ł Flow Control—None ł Communication Code—ASCII code ł Use a crossed (reverse) cable Command reference list 94 COMMAND1 COMMAND2 DATA1 01. Power k a 00H–01H 02.
2nd Draft COMMAND1 COMMAND2 DATA1 DATA2 DATA3 16. Abnormal State k z FFH 17. ISM Mode j p 01H–08H 18. Auto Configuration j u 01H 19. Key m c Key Code 20. Tile Mode d d 00H–55H 21. Tile H Position d e 00H–14H 22. Tile V Position d f 00H–14H 23. Tile H Size d g 00H–64H 24. Tile V Size d h 00H–64H 25. Tile ID Set d i 00H–19H 26. Natural Mode (In Tile Mode) d j 00H–01H 27. Picture Mode (PSM) d x 00H–06H 28. Sound Mode d y 01H–05H 29.
2nd Draft COMMAND1 COMMAND2 DATA1 44. Reset f k 00H–02H 45. Power Saving f l 00H–03H 46. Power Indicator f o 00H–01H 47. Serial No. f y FFH 48. S/W Verison f z FFH 49. Input Select x b 60H–C0H DATA2 DATA3 Transmission/Receiving Protocol Transmission [Command1][Command2][][Set ID][][Data][Cr] [Command 1] First command (k, j, m, d, f, x) [Command 2] Second command (a to u) [Set ID] Set up the Set ID number of product. range : 01H to 63H.
2nd Draft [Command2][][Set ID][][NG][Data][x] *If there is error, it returns NG 01. Power (Command : a) To control Power On/Off of the Set. Transmission [k][a][][Set ID][][Data][Cr] [Data] 0 : Power Off 1 : Power On Acknowledgement [a][][Set ID][][OK][Data][x] To show the status of Power On/Off. Transmission [k][a][][Set ID][][FF][Cr] Acknowledgement [a][][Set ID][][OK][Data][x] [Data] 0 : Power Off 1 : Power On 02.
Draft [k][b][][Set ID][][Data][Cr] [Data] 7 : RGB (PC) 8 : HDMI (DTV) 9 : HDMI (PC) A: Display port (DTV) B: Display port (PC) Acknowledgement [b][][Set ID][][OK][Data][x] [Data] 7 : RGB (PC) 8 : HDMI (DTV) 9 : HDMI (PC) A: Display port (DTV) B: Display port (PC) 03. Aspect Ratio (Command : c) (Main picture format) To adjust the screen format. You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the Screen menu.
2nd Draft [Data] 1 : Normal Screen (4:3) 2 : Wide Screen (16:9) 4 : Zoom (HDMI-PC, Display Port-PC) 6 : Original 7 : 14:9 (HDMI-PC, Display Port-PC) 9 : Just Scan (HD-DTV) *When the RGB, HDMI/DVI-PC, DisplayPort-PC mode (1:1) 10 to 1F : Cinema Zoom 1 to 16 (HD-DTV) Acknowledgement [c][][Set ID][][OK][Data][x] 04. Screen Mute (Command : d) To select screen mute on/off.
2nd Draft [Data] 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On) Acknowledgement [e][][Set ID][][OK][Data][x] [Data] 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On) 06. Volume Control (Command : f) To adjust Volume.
2nd Draft Real data mapping 0 : Step 0 : A : Step 10 : F : Step 15 10 : Step 16 : 64 : Step 100 07. Contrast (Command : g) To adjust screen contrast. You can also adjust the contrast in the Picture menu. Transmission [k][g][][Set ID][][Data][Cr] [Data] Min : 00H to Max : 64H Acknowledgement [g][][Set ID][][OK][Data][x] Real data mapping 0 : Step 0 : A : Step 10 : F : Step 15 10 : Step 16 : 64 : Step 100 08. Brightness (Command : h) To adjust screen brightness.
2nd Draft Transmission [k][h][][Set ID][][Data][Cr] [Data] Min : 00H to Max : 64H Refer to “Real data mapping” as shown below. Acknowledgement [h][][Set ID][][OK][Data][x] Real data mapping 0 : Step 0 : A : Step 10 : F : Step 15 10 : Step 16 : 64 : Step 100 09. Color (Command : i) (Video Timing only) To adjust the screen color. You can also adjust the color in the Picture menu.
2nd Draft Real data mapping 0 : Step 0 : A : Step 10 : F : Step 15 10 : Step 16 : 64 : Step 100 Acknowledgement [i][][Set ID][][OK][Data][x] [Data] Min : 00H to Max : 64H (Hexadecimal code) 10. Tint (Command : j) (Video Timing only) To adjust the screen tint. You can also adjust the tint in the Picture menu.
2nd Draft Real data mapping 0 : Step 0 : A : Step 10 : F : Step 15 10 : Step 16 : 64 : Step 100 Acknowledgement [j][][Set ID][][OK][Data][x] [Data] Red: 00H to Green: 64H Tint real data mapping 0 : Step 0 to Red : 64 : Step 100 to Green 11. Sharpness (Command : k) (Video Timing only) To adjust the screen Sharpness. You can also adjust the sharpness in the Picture menu.
2nd Draft Real data mapping 0 : Step 0 : A : Step 10 : F : Step 15 10 : Step 16 : 64 : Step 100 Acknowledgement [k][][Set ID][][OK][Data][x] [Data] Min : 00H to Max : 64H 12. OSD Select (Command : l) To control OSD on/off to the set.
2nd Draft 13. Remote Lock /Key Lock (Command : m) To control Remote Lock on/off to the set. This function, when controlling RS-232C, locks the remote control and the local keys. Transmission [k][m][][Set ID][][Data][Cr] [Data] 0 : Off 1 : On Acknowledgement [m][][Set ID][][OK][Data][x] [Data] 0 : Off 1 : On 14. Balance (Command : t) To adjust the sound balance.
2nd Draft [Data] Min : 00H to Max : 64H 00H : Step 0 to L50 64H : Step 100 to R50 Balance : L50 to R50 15. Color Temperature (Command : u) To adjust the screen color temperature. Transmission [k][u][][Set ID][][Data][Cr] [Data] 0 : Medium 1 : Cool 2 : Warm Acknowledgement [u][][Set ID][][OK][Data][x] [Data] 0 : Medium 1 : Cool 2 : Warm 16. Abnormal state (Command : z) Abnormal State : Used to Read the power off status when Stand-by mode.
2nd Draft [z][][Set ID][][OK][Data][x] [Data] 0 : Normal (Power on and signal exist) 1 : No signal (Power on) 2 : Turn the display off by remote control 3 : Turn the display off by sleep time function 4 : Turn the display off by RS-232-C function 8 : Turn the display off by off time function 9 : Turn the display off by auto off function 17. ISM mode (Command : j p) Used to select the afterimage preventing function.
Draft [Data] 1 : To set Acknowledgement [u][][Set ID][][OK][Data][x] 19. Key (Command : m c) To send IR remote key code. Transmission [m][c][][Set ID][][Data][Cr] Data Key code : Refer to the IR Codes Table on page 128 section. Acknowledgement [c][][Set ID][][OK][Data][x] 20. Tile Mode (Command : d d) Change a Tile Mode. Transmission [d][d][][Set ID][][Data][x] [Data] Description 00 or 11 Tile mode is off. 12 1 x 2 mode (column x row) 13 1 x 3 mode 14 1 x 4 mode ... ...
2nd Draft [d][][00][][OK/NG][Data][x] 21. Tile H Position (Command : d e) To set the Horizontal position. Transmission [d][e][][Set ID][][Data][x] [Data] Min : 00H to Max : 14H 00H : Step -10 (Left) 14H : Step 10 (Right) Acknowledgement [e][][Set ID][][OK/NG][Data][x] 22. Tile V Position (Command : d f) To set the Vertical position. Transmission [d][f][][Set ID][][Data][x] [Data] Min : 00H to Max : 14H 00H : Step -10 (Left) 14H : Step 10 (Right) Acknowledgement [f][][Set ID][][OK/NG][Data][x] 23.
2nd Draft Transmission [d][g][][Set ID][][Data][x] [Data] Min : 00H to Max : 64H Real data mapping 0 : Step 0 : A : Step 10 : F : Step 15 10 : Step 16 : 64 : Step 100 Acknowledgement [g][][Set ID][][OK/NG][Data][x] 24. Tile V Size (Command : d h) To set the Vertical size.
2nd Draft Real data mapping 0 : Step 0 : A : Step 10 : F : Step 15 10 : Step 16 : 64 : Step 100 Acknowledgement [h][][Set ID][][OK/NG][Data][x] 25. Tile ID Set (Command : d i) To assign the Tile ID for Tiling function. Transmission [d][i][][Set ID][][Data][x] [Data] Min : 00H to Max : 19H (Hexadecimal code) Acknowledgement [i][][Set ID][][OK/NG][Data][x] 26. Natural Mode (In Tile Mode) (Command : d j) To assign the Title Natural mode for Tiling function.
2nd Draft [Data] 0 : Natural Off 1 : Natural On ff : Read Status Acknowledgement [j][][Set ID][][OK/NG][Data][x] 27. Picture Mode (Command : d x) To adjust the picture mode. Transmission [d][x][][Set ID][][Data][x] Data Structure Data (Hex) MODE 00 Vivid 01 Standard 02 Cinema 03 Sport 04 Game 05 Expert 1 06 Expert 2 Acknowledgement [x][][Set ID][][OK/NG][Data][x] 28. Sound Mode (Command : d y ) To adjust the Sound mode.
2nd Draft Data Structure Data (Hex) MODE 01 Standard 02 Music 03 Cinema 04 Sport 05 Game Acknowledgement [y][][Set ID][][OK/NG][Data][x] 29. Fan Fault check (Command : d w ) To check the Fan fault of the TV. Transmission [d][w][][Set ID][][Data][x] [Data] Data is always FF (in Hex) Data ff: Read Status Acknowledgement [w][][Set ID][][OK/NG][Data][x] [Data] * Data is the status value of the Fan fault. 0: Fan fault 1: Fan OK 2: N/A (Not Avaliable) 30.
2nd Draft Transmission [d][l][][Set ID][][Data][x] [Data] Data is always FF (in Hex) Acknowledgement [l][][Set ID][][OK/NG][Data][x] [Data] The data means used hours. (Hexadecimal code) 31. Temperature value (Command : d n) To read the inside temperature value. Transmission [d][n][][Set ID][][Data][x] [Data] Data is always FF (in Hex) Acknowledgement [n][][Set ID][][OK/NG][Data][x] [Data] The data is 1 byte long in Hexadecimal. 32. Lamp fault Check (Command : d p) To check lamp fault.
2nd Draft [Data] Data is always FF (in Hex) Acknowledgement [p][][Set ID][][OK/NG][Data][x] [Data] 0 : Lamp Fault 1 : Lamp OK 2 : N/A(DPM/Power Off) 33. Auto volume (Command : d u) Automatically adjust the volume level. Transmission [d][u][][Set ID][][Data][x] [Data] 0 : Off 1 : On Acknowledgement [u][][Set ID][][OK/NG][Data][x] 34. Speaker (Command : d v) Turn the speaker on or off.
2nd Draft [v][][Set ID][][OK/NG][Data][x] 35. Time (Command : f a) Set the current time. Transmission [f][a][][Set ID][][Data1][][Data2][][Data3][Cr] [Data1] 0 : Monday 1 : Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday [Data2] 0H to 17H (Hours) [Data3] 00H to 3BH (Minutes) Acknowledgement [a][][Set ID][][OK/NG][Data1][Data2][Data3][x] *When reading data, FFH is inputted for [Data1], [Data2] and [Data3]. In other cases, all are treated as NG. 36.
2nd Draft [Data1] 1. 2. 3.
2nd Draft Transmission [f][e][][Set ID][][Data1][][Data2][][Data3][Cr] [Data1] 1. 2. 3.
2nd Draft [e][][Set ID][][OK][Data1][Data2][Data3][x] 38. Scheduling Input select (Command : f u) (Main Picture Input) To select input source for TV depending on day. Transmission [f][u][][Set ID][][Data1][][Data2][Cr] 1.
2nd Draft 39. Sleep Time (Command : f f) Set Sleep Time. Transmission [f][f][][Set ID][][Data][Cr] [Data] 0 : Off 1 : 10 2 : 20 3 : 30 4 : 60 5 : 90 6 : 120 7 : 180 8 : 240 Acknowledgement [f][][Set ID][][OK/NG][Data][x] 40. Auto Sleep (Command : f g) Set Auto Sleep.
2nd Draft 41. Power On Delay (Command : f h) Set the schedule delay when the power is turned on (Unit: second). Transmission [f][h][][Set ID][][Data][Cr] [Data] 00H to 64H (Data value) Real data mapping 0 : Step 0 : A : Step 10 : F : Step 15 10 : Step 16 : 64 : Step 100 Acknowledgement [h][][Set ID][][OK/NG][Data][x] 42. Language (Command : f i) Set the OSD language.
Draft [Data] 0 : English 1 : French 2 : German 3 : Spanish 4 : Italian 5 : Portuguese 6 : Chinese 7 : Japanese 8 : Korean 9 : Russian Acknowledgement [i][][Set ID][][OK/NG][Data][x] 43. DPM Select (Command : f j) Set the DPM (Display Power Management) function. Transmission [f][j][][Set ID][][Data][Cr] [Data] 0 : Off 1 : On Acknowledgement [j][][Set ID][][OK/NG][Data][x] 44. Reset (Command : f k) Execute the Picture, Screen and Factory Reset functions.
Draft [Data] 0 : Picture Reset 1 : Screen Reset 2 : Factory Reset Acknowledgement [k][][Set ID][][OK/NG][Data][x] 45. Power saving(Command : f I) To set the Power saving mode. Transmission [f][I][][Set ID][][Data][Cr] [Data] 0 : Off 1: (static level 1) 2: (static level 2) 3: (static level 3) Acknowledgement [I][][Set ID][][OK/NG][Data][x] 46.
2nd Draft [o][][Set ID][][OK/NG][Data][x] 47. Serial no. Check (Command : f y) To read the serial numbers Transmission [f][y][][Set ID][][Data][Cr] [Data] Data FF (to read the serial numbers) Acknowledgement [y][][Set ID][][OK/NG][Data1]to[Data13][x] [Data] The data format is ASCII Code. 48. S/W Version (Command : f z) Check the software version. Transmission [f][z][][Set ID][][Data][Cr] [Data] FFH : Read Acknowledgement [z][][Set ID][][OK/NG][Data][x] 49.
2nd Draft [x][b][][Set ID][][Data][Cr] [Data] 60H : RGB (PC) 90H : HDMI/DVI (DTV) A0H : HDMI/DVI (PC) B0H: Display port(HD-DVD) C0H: Display port(PC) Acknowledgement [b][][Set ID][][OK][Data][x] [Data] 60H : RGB (PC) 90H : HDMI/DVI (DTV) A0H : HDMI/DVI (PC) B0H: Display port(HD-DVD) C0H: Display port(PC) IR codes Use this method to connect your wired remote control port on the display. Remote Control IR Code Output waveform 126 ł Single pulse, modulated with 37.
2nd Draft Configuration of frame ł 1st frame ł Repeat frame Lead code Repeat code Bit description ł Bit “0” 0.56 ms 1.12 ms ł Bit “1” 0.56 ms 2.24 ms Frame interval: Tf The waveform is transmitted as long as a key is depressed.
2nd Draft IR Codes Table 128 Code (Hex ) Function Note 40 Up arrow R/C Button 41 Down arrow R/C Button 06 Right arrow R/C Button 07 Left arrow R/C Button 08 POWER ON/OFF R/C Button C4 MONITOR ON R/C Button (Discrete IR Code) C5 MONITOR OFF R/C Button (Discrete IR Code) 09 MUTE R/C Button 95 Energy Saving R/C Button 0B INPUT R/C Button 43 MENU R/C Button 5B EXIT R/C Button 4D PSM R/C Button 44 OK R/C Button 10 Number Key 0 R/C Button 11 Number Key 1
2nd Draft ENWW Code (Hex ) Function Note 99 AUTO CONFIG R/C Button 72 ID ON (Red Color) R/C Button (Discrete IR Code) 71 ID OFF (Green Color) R/C Button 63 (Yellow Color) R/C Button 61 (Blue Color) R/C Button 7B TILE R/C Button B0 Play R/C Button B1 Stop R/C Button BA Pause II R/C Button 8F Reverse R/C Button 8E Fast forward R/C Button D5 RGB PC Discrete IR Code (Input RGB PC Selection) C6 HDMI/DVI Discrete IR Code (Input HDMI/DVI Selection) 76 ARC (4:3
2nd Draft 130 Appendix C Command reference ENWW
2nd Draft D Agency regulatory notices Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
2nd Draft Declaration of Conformity for products marked with the FCC logo (United States only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. For questions regarding the product, contact: Hewlett Packard Company P. O.
Draft CE compliance of this product is valid if powered with the correct CE-marked AC adapter provided by HP. Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family and available (in English only) either within the product documentation or at the following web site: www.hp.eu/certificates (type the product number in the search field).
2nd Draft Power cord set requirements The display power supply is provided with Automatic Line Switching (ALS). This feature allows the display to operate on input voltages between 100–120V or 200–240V. The power cord set (flexible cord or wall plug) received with the display meets the requirements for use in the country where you purchased the equipment. If you need to obtain a power cord for a different country, you should purchase a power cord that is approved for use in that country.
2nd Draft health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact the local city office, the household waste disposal service or the shop where you purchased the product. Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and Council).
2nd Draft 11363-2006 11363-2006 Turkey EEE regulation In Conformity with the EEE Regulation EEE Yönetmeli ine Uygundur 136 Appendix D Agency regulatory notices ENWW
Regulatory Information cont. FCC Compliance Statement respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements.
Regulatory Information cont. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal.
Regulatory Information cont. • exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available.
Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG.
Regulatory Information cont. Italiano respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, económicos y medioambientales. Informazioni per la tutela dell’ambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente più pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale.
Regulatory Information cont. especificamente o conceito de favorável ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, não há cádmio em nossos monitores. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. Informações relacionadas à reciclagem Este monitor pode conter peças que podem representar riscos ao ambiente.
Regulatory Information cont. ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒΠËÒÔÓθÁÓ‚‡Ìˡ. KÓÔÓ‡ˆËˇ LGE Ô‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚ ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ ‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡ ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚ ·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ ‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚ ·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.
Regulatory Information cont. WEEE un bidone della spazzatura barrato da una croce significa che il prodotto è coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorità locali. 3.
Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger på miljøet og menneskelig sundhed. 4.
Regulatory Information cont.
Regulatory Information cont.
