OWNER’S MANUAL DLP PROJECTOR Please read this manual carefully before operating your set and retain it for future reference. HX300G HX301G www.lge.
DLP PROJECTOR Warning This is a class B product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. This projector complies with EMC Directive and R&TTE Directive.
Contents Contents Safety Instructions ....................................................... 4 Names of parts Main Body ..........................................................................................7 Control Panel .....................................................................................7 Connecting Part .............................................................................. 8 Remote Control ..............................................................................
Safety Instructions Safety Instructions Please take note of the safety instructions to prevent any potential accident or misuse of the projector. ᰶ Safety Instructions are given in two forms as detailed below. WARNING : The violation of this instruction may cause serious injuries and even death. NOTES : The violation of this instruction may cause injuries or damage to the projector. ᰶ After reading this manual, keep it in the place that you can access easily.
Safety Instructions Power WARNING Never touch the power plug with a wet hand. Do not plug-in too many items into one power outlet. Prevent dust from collecting on the power plug pins or outlet. This may cause an electric shock hazard! It may result in overheating of the outlet and create a fire hazard! This may cause a fire hazard! Power NOTES Hold the plug firmly when unplugging. If you pull the cord, it may be damaged.
Safety Instructions Using WARNING If the projector is in a room that experiences a gas leak, do not touch the projector. Always open the lens door or remove the lens cap when the projector lamp is on. It can cause a fire or a burn by a spark. Using NOTES Do not place heavy objects on top of projector. Take care not to impact the lens particularly when moving the projector. Do not touch the lens of the projector. It is delicate and easily damaged.
Names of parts Names of parts Main Body * The projector is manufactured using high-precision technology. You may, however, see on the Projector screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the manufacturing process and does not always indicate a malfunction. Exhaustion Direction# High heat is generated, so do not get near the exhaustion direction during the use.
Names of parts Connecting Part Headphone port USB VIDEO IN IR (Remote control sensor) * Do not block the IR port for normal operation of remote control. AUDIO IN Kensington Security System Connector (Refer to page 13) HDMI RGB IN DC IN *When using HDMI/USB connector, if the size of the jack connecting to the connector is too big, they may not be connected. Please use standard size jack.
Names of parts Remote Control INPUT Button POWER Button MUTE Button VOLUME +, - Button OK USB Button BLANK Button PAGE ġ/Ģ Button RATIO Button AUTO Button MENU Button Q.MENU Button , ġ/Ģ/˘/˚ Button MARK Button USB control Buttons BACK Button STILL Button (Functions as the STILL button in any mode other than DivX.) KEYSTONE ᯜ,ᯝ Button Installing Batteries CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED WITH AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Names of parts Accessories Remote Control AAA Battery Owner’s manual CD Owner’s manual Power Cord Computer Cable AC-DC Adapter RGB to Component Cable Portable bag Polishing Cloth ƒ ƒ ƒ Use a remote control up to 6 meters distance and 30° (left/right) within the receiving unit scope. We recommend you to use the remote control under 3 m distance and 30° (left/right) when the cables are connected in the back outputs.
Installing and Composition Installing and Composition Installation Precautions Provide proper ventilation for this projector. • The projector is equipped with ventilation holes(intake) on • Do not place the projector on a carpet, rug or other similar surface. It may prevent a adequate ventilation of the prothe bottom and ventilation holes(exhaust) on the front. Do jector bottom. This product should be mounted to a wall not block or place anything near these holes. Internal heat or ceiling only.
Installing and Composition Basic Operation of the Projector 1. Place the projector on a sturdy and horizontal surface with the PC or AV source. 2. Place the projector with the desired distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3. Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the screen image will be crooked.
Installing and Composition How to install the projector using the tripod * You can install this projector using a tripod for the camera. You can assemble the projector instead of the camera on camera tripod. * When stabilizing the tripod, we recommend using the locking bolt of the standard size 4.5 mm or less.The maximum size allowed for the locking bolt is 6.5 mm.(If it is longer than the maximum allowed size, it may damage the projector.
Installing and Composition Turning on the Projector 1. Make sure the power cord is connected correctly. 2. Press the POWER button on the top cover or the POWER button on the remote control. (The light on the control panel will be turned on.) • Press the INPUT button on the remote control to select the input signal you want.
Connection Connection Connecting to a Desktop PC * You can connect the projector to a computer with VGA, SVGA, XGA, SXGA output. * Refer to page 41 for resolutions the projector supports. < How to connect > 1. Connect the RGB IN of the projector and the computer output port with a computer cable. 2. Connect the AUDIO IN of the projector and the computer audio output port with an audio cable. * You may have to change the resolution that your PC exports to one supported by the projector.
Connection Connecting to a DVD Player * Depending on the equipment, the component output jacks (Y, PB, PR) of the DVD Player may be labeled as Y, Pb, Pr/Y, B-Y, R-Y/Y, Cb, Cr. < How to connect a HDMI source > HDMI Cable 1. Connect the HDMI IN of the projector and the HDMI output port of the DVD Player with an HDMI cable. 2. Set the DVD Player's resolution to one of the following: 480p(576p)/720p/1080i/1080p mode. < How to connect a Component source > Audio Cable 1.
Function Function * The On-Screen Display (OSD) in this manual may be slightly different from your projector. * This operating guide explains operation of RGB(PC) mode mainly. PICTURE Menu Options Picture mode * Use the Picture mode function to set the projector for the best picture appearance. Picture Mode 1. Press the Q.MENU button on the remote control. 2. Press the ˘, ˚ buttons to move to Picture mode. Standard 3. Press the ġ Ģ button to toggle through the preset picture settings.
Function Advanced Control Function < When Picture Mode is Vivid/Standard/Cinema/Sport/ Game > 1. Press the MENU button. Then, move to PICTURE with the ġ, Ģ, ˘, ˚ buttons and press the OK button. 2. Press the ġ, Ģ buttons to move to Advanced Control and press the OK button. 3. Move to a desired item with the ġ, Ģ buttons.
Function - This function enables Expert 1/2. ᰶThis is the function to adjust the overall color of the screen to the feeling you want. a. Method : 2 Points - Pattern: Inner, Outer - Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjustment range is -50 ~ +50. b. Method : 20 Points IRE - Pattern: Inner, Outer - IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 5, 10, 15 - 95, 100. You can adjust Red, Green or Blue according to each setting.
Function SCREEN Menu Options To Change PJT Mode * This function turns the projected image upside down or flips horizontal. PJT Mode 1. Press the Q.MENU button on the remote control. 2. Press the ˘, ˚ buttons to move to PJT Mode. Front 3. Press the ġ, Ģ button to select a desired item. • • • • • Select Rear when projecting from the back of the transparent screen purchased separately. Select Ceiling when installing the product on the ceiling.
Function Auto Configure Function * This function assures you of getting the best video quality by automatically adjusting the horizontal size and synchronization of the image. * Auto Tracking function works in RGB PC input only. Press the AUTO button of the remote control. • If you execute screen adjustment for a video from PC graphic signal, optimal state may not be found. Execute the Auto Configure function for a still image. • You can use this function through the MENU button.
Function AUDIO Menu Options What is FM Wireless Audio? (HX300G only) FM Wireless Audio is a function to send out audio signals from the projector using FM frequency (88.5 MHz ~ 95.5 MHz). The frequency of Projector and FM receiver should be same in order to output the sound from FM receiver normally. The signal can be received by using FM receiver within 3 m of distance. Audio Signal 88.5 MHz ~95.
Function Installing Instructions (HX300G only) • If used in a medical institution, it may cause an error for medical equipments. Please do not use in a medical establishment. • Please maintain the distance between the projector and FM receiver within 3 m. • The sound from FM receiver may not come out in the desired quality if the distance is more than 3 m. • Please adjust the location of FM receiver and its antenna and install them to where it shows a good condition of receiving reception.
Function To listen through the FM receiver speaker (HX300G only) 1. Press the MENU button. Then, move to AUDIO with the ġ, Ģ, ˘, ˚ buttons and press the OK button. AUDIO ᰰMove ᰷OK FM Wireless Audio : Off • Frequency 88.5 MHz Volume 50 Balance 0 L Treble 0 2. Press the ġ, Ģ buttons to move to FM Wireless Audio and press the OK button. R 3. Press the ġ, Ģ buttons to move to On and press the OK button. 4. Press the ġ, Ģ buttons to move to Frequency and press the OK button. 5.
Function Adjusting Speaker Balance * Adjust the left/right sound of speaker to suit your taste and room situations. 1. Press the MENU button. Then, move to AUDIO with the ġ, Ģ, ˘, ˚ buttons and press the OK button. 2. Press the ġ, Ģ buttons to move to Balance and press the OK button. AUDIO ᰰMove ᰷OK FM Wireless Audio : Off • Frequency 88.5 MHz Volume 50 Balance 0 L Treble 0 R 3. Press the ˘, ˚ buttons to adjusting audio balance and press the OK button.
Function TIME Menu Options Sleep time Function Sleep Timer * The sleep timer turns the projector off at the preset time. 1. Press the Q.MENU button on the remote control. Off 2. Press the ˘, ˚ buttons to move to Sleep Timer. 3. Press the ġ, Ģ buttons to select a desired preset time. ᯧ ᯧ Off 240 Min. ᯓ ᯓ ᯧ ᯧ 10 Min. 180 Min. ᯓ ᯓ ᯧ ᯧ 20 Min. 120 Min. ᯓ ᯓ ᯧ 30 Min. ᯓ ᯧ 60 Min. ᯓ ᯧ 90 Min. ᯓ • You can use this function through the MENU button.
Function OPTION Menu Options Selecting Language 1. Press the MENU button. Then, move to OPTION with the ġ, Ģ, ˘, ˚ buttons and press the OK button. 2. Press the ġ, Ģ buttons to move to Menu Language and press the OK button. 3. Move to a desired item with the ġ, Ģ, ˘, ˚ buttons and then press the OK button.
