ENGLISH OWNER’S MANUAL LCD MONITOR Please read this manual carefully before operating the your set and retain it for future reference. LCD MONITOR MODEL MODEL NO.: IPS225V IPS235*X IPS235V IPS225*X www.lg.
TABLE OF CONTENTS CONTENTS ENGLISH ENG 3 ASSEMBLING AND PREPARING 3 Unpacking 4 Parts and buttons 6 Setting up the Monitor set 6 - Attaching the Stand Base 6 - Detaching the Stand Base 7 - Mounting on a table 8 - Mounting on a wall 10 USING THE MONITOR SET 10 Connecting to a PC 10 - D-SUB connection 10 - DVI-D connection 10 - HDMI connection 12 CUSTOMIZING SETTINGS 12 Accessing The Main Menus 13 Customizing Settings 13 - Menu Settings 14 - 15 16 16 17 - COLOR -DISPL
ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card D-SUB Cable (This signal cable may be attached to this product before shipping out.) Power Cord DVI-D Cable (This cable is not included in all countries.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator � Lighting On: Turned on Lighting Off: Turned off (Power Button) Button (See p.13) AC-IN/ 电源输入 D-SUB DVI-D HDMI Connection panel (See p.
ASSEMBLING AND PREPARING Button Description Accesses the main menus.(See p.13) OSD LOCKED/ UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. MODE Use this button to enter USER ,MOVE,TEXT, PHOTO,sRGB menus.(See p.
ASSEMBLING AND PREPARING Setting up the Monitor set Detaching the Stand Base and Body ENGLISH ENG Attaching the Stand Base 1 Place the Monitor set with the screen side 1 Place the Monitor set with the screen side down on a flat and cushioned surface. down on a flat and cushioned surface. 2 Turn the screw to the left, and then pull out the CAUTION Stand Base from the Stand Body. Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
ASSEMBLING AND PREPARING Mounting on a table WARNING position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. When you adjust the angle, do not hold the buttom of the Monitor set frame as shown on the following illustration, as may injure your fingers. 10 cm 10 cm 10 cm Do not touch or press the screen when adjusting the angle of the monitor. 2 Connect the Power Cord to a wall outlet.
ASSEMBLING AND PREPARING Using the Kensington security system ENGLISH ENG The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall.
USING THE MONITOR SET IPS225V/IPS235V VESA (A x B) Standard screw Number of screws 100 x 100 M4 4 CAUTION Disconnect the power cord first, and then yy move or install the Monitor set. Otherwise electric shock may occur. If you install the Monitor set on a ceiling or yy slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount yy and contact the local dealer or qualified personnel.
USING THE MONITOR SET USING THE MONITOR SET ENGLISH ENG Connecting to a PC DVI-D connection Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.
USING THE MONITOR SET CAUTION NOTE � When you want to use two PC in our Monitor, please connect the signal cable(D-SUB/ DVI-D/HDMI) respectively in Monitor set. � If you turn the Monitor set on while it is cold, the screen may flicker. This is normal. � Some red, green, or blue spots may appear on the screen. This is normal. Self Image Setting Function Press the power button on the front panel to turn the power on.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG Accessing The Main Menus 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the desired menu item. 3 Change the value of the menu item by pressing the buttons on the front of the Monitor set. ) button. To return to the upper menu or set other menu items, use the up arrow ( 4 Select EXIT to leave the OSD menu. Monitor set Buttons MENU(See p.13) Sets the screen options. DUAL (See p.
CUSTOMIZING SETTINGS 13 Customizing Settings ENG ENGLISH Menu Settings 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available progam settings are described below.
CUSTOMIZING SETTINGS ENGLISH ENG PICTURE 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select PICTURE by pressing the buttons on the front of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below.
CUSTOMIZING SETTINGS 15 ENG ENGLISH COLOR COLOR 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. USER WARM 2 Press the MENU button to display the options in the OSD menu. SIX COLOR 3 Select COLOR by pressing the buttons on the front of the 2.2 Monitor set and set the options. COLOR RESET NO 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.
CUSTOMIZING SETTINGS ENGLISH ENG DISPLAY 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select DISPLAY by pressing the buttons on the front of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below.
CUSTOMIZING SETTINGS 17 OTHER MONITOR SETUP OSD menu. WIDE ORIGINAL RATIO 2 Press the MENU button to display the options in the OSD menu. 3 Select OTHERS by pressing the buttons on the front of the ENGLISH 1 Press any button on the front of the Monitor set to display the SUPER ENEYGY SAVING SUPER ENERGY SAVING Monitor set and set the options. 4 Select EXIT to leave the OSD menu. ON To return to the upper menu or set other menu items, use the up arrow ( ) button.
CUSTOMIZING SETTINGS ENGLISH MODE Setting 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MODE button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. MODE T USER MOVIE TEXT sRGB PHOTO sRGB EXIT The available picture settings are described below.
CUSTOMIZING SETTINGS 19 DUAL PACKAGE Setting ENGLISH * Before using below functions, please install DUAL PACKAGE programme. * Only for D-SUB/DVI-D input. 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. DUAL PACKAGE DUAL MONITOR 1 2 2 Press the DUAL button to display the options in the DUAL WEB OSD menu. 3 Set the options by pressing the buttons on the front of the Monitor set. 1 2 4 Select EXIT to leave the OSD menu.
TROUBLESHOOTING ENGLISH TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? Press the Power button. Adjust the brightness and the contrast.
TROUBLESHOOTING 21 CAUTION Display image is incorrect The screen color is mono or abnormal. Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Make sure the video card is properly inserted in the slot. Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. The screen blinks. Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
SPECIFICATIONS ENGLISH SPECIFICATIONS IPS225V Display Screen Type Sync Input Pixel Pitch Horizontal Frequency Vertical Frequency Video Input Input Form Signal Input Resolution Input Form Max Plug & Play Power Consumption Power Input Dimensions (Width x Height x Depth) 54.5 cm (22 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 54.5 cm 0.247 mm x 0.247 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Separate Sync.
SPECIFICATIONS 23 ENGLISH SPECIFICATIONS IPS235V Display Screen Type Sync Input Pixel Pitch Horizontal Frequency Vertical Frequency Video Input Input Form Signal Input Resolution Input Form Max Plug & Play Power Consumption Power Input Dimensions (Width x Height x Depth) 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58.4 cm 0.265 mm x 0.265 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Separate Sync.
SPECIFICATIONS Preset Modes (Resolution) ENGLISH Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.123 75 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
