User's Manual

17
ENGLISH
CUSTOMIZING SETTINGS
OTHER
The available picture settings are described below.
Menu Description
Press the , buttons to reset
immediately.
To choose the language in which the control names are displayed.
LANGUAGE
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
Restore all factory default settings except "LANGUAGE."
FACTORY
RESET
POWER
INDICATOR
Use this function to set the power indicator on the front side of the monitor to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
deteriorate due
ORIGINAL RATIO
SUPER ENEYGY SAVING
WIDE
ORIGINAL RATIO
WIDE
Switch to full screen mode according to input image signal.
ORIGINAL
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor
set ratio (16:9).
SUPER ENEYGY
SAVING
Sets the SUPER ENERGY SAVING function.
EXIT
OK
ON OFF RESET
TOTAL POWER REDUCTION: 20 W
TOTAL CO2 REDUCTION: 16 g
SUPER
SAVING
: 5 W/h
LED
SAVING
: 12 W/h
SUPER ENERGY SAVING
ON
Enables SUPER ENERGY SAVING you can save energy with this energy-efficient
OFF Disables SUPER ENERGY SAVING.
RESET
Resets the values of total energy consumption reduction and CO2 emission reduction
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
SAVING DATA(W/h)
584 mm (23 inch)
SUPER SAVING 5 W/h
LED SAVING 12 W/h
545 mm (22 inch)
4 W/h
15 W/h
Saving Data depends on the Panel. So,those values should be different from each panel and panel
vendor.
LG calculated these values by using “broadcast video signal”.
LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel.
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
function.
NOTE
estimates.
function.
1
Press any button on the front of the Monitor set to display the
MONITOR SETUP OSD menu.
2
Press the MENU button to display the options in the OSD menu.
3
Select OTHERS by pressing the buttons on the front of the
Monitor set and set the options.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, use the
up arrow (
) button.