Order Number : GETEC-C1-12-281 FCC Part 15 subpart B Test Report Number : GETEC-E3-12-096 Page 1 / 1 APPENDIX G : USER’S MANUAL EUT Type: LED LCD Monitor FCC ID.
ENGLISH OWNER’S MANUAL IPS LED MONITOR Please read this manual carefully before operating your set and retain it for future reference. IPS LED MONITOR MODEL IPS237W www.lg.
2 TABLE OF CONTENTS CONTENTS ENGLISH ENG 3 LICENSES 34 CUSTOMIZING SETTINGS 35 Customizing Settings - Menu Settings 4 KEY FEATURES 35 36 - PICTURE 4 ADVANCED FEATURES OF LG IP- 37 - COLOR S237W WITH LG SmartShare 38 - DISPLAY 39 - OTHERS 40 Wi-Fi Setting 41 FUNC.
LICENSES 3 LICENSES HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ENG ENGLISH Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
4 KEY FEATURES KEY FEATURES ENGLISH ENG ADVANCED FEATURES OF LG IPS237W WITH LG SmartShare With the LG SmartShare for LG IPS237W, the user environment of the monitor becomes smart. /PU $ POOFD UFE LG_Monitor_C54A 2233 You can enjoy conten ts from smart devices directly on your monito r screen through SmartS hare feature . Please execute Miracast, WiDi, DLNA function of your devices that you would like to connect to your monitor.
ASSEMBLING AND PREPARING 5 ASSEMBLING AND PREPARING ENG ENGLISH Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. or CD(Owner's Manual) / Card D-SUB Cable (This cable is not included in all countries.) MHL Cable (This cable is not included in all countries.
6 ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator y Lighting On: Turned on y Lighting Off: Turned off (Power Button) Button (See p.34) Connection panel (See p.
ASSEMBLING AND PREPARING Setting up the Monitor set 7 3 Secure the monitor and the Stand Body with the 2 screws. ENG ENGLISH Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 Attach the Stand Body to the monitor.
8 ASSEMBLING AND PREPARING ENGLISH ENG Detaching the Stand Base Mounting on a table 1 Place the monitor with the screen side down on 1 Lift and tilt the Monitor set into its upright a flat and cushioned surface. position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Turn the screw to the left, and then pull out the 10 cm Stand Base from the Stand Body. 10 cm 10 cm 10 cm 2 Connect the AC-DC Adapter and Power Cord to a wall outlet.
ASSEMBLING AND PREPARING 3 Press (Power) button on the bottom switch panel to turn the power on. 9 Using the cable holder ENG ENGLISH CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.
10 ASSEMBLING AND PREPARING WARNING Using the Kensington security system ENGLISH ENG When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com .
USING THE MONITOR SET 11 USING THE MONITOR SET LG SmartShare is a LG Electronics' unique software that allows users to share media files (video, picture, music, etc.) of a device connected to a network and use various functions. LG SmartShare for LG IPS237W supports the following three wireless connection methods: Wireless Display (Wi-Di) LG SmartShare allows a user to wirelessly connect a computer with the Wi-Di technology to the monitor and transmit a high quality image.
12 USING THE MONITOR SET Digital Living Network Alliance (DLNA) ENGLISH ENG LG SmartShare allows a user to connect a device with the DLNA technology and the monitor to the same network and display its media contents (picture, video, music, etc.) on the monitor.
USING THE MONITOR SET 13 Supported Files for LG SmartShare Video Codec Maximum supported resolution: 1920 x 1080 at 30p Extension Codec AVI Video H264, MPEG2, MPEG4, DivX3, DivX4, DivX5, XviD Audio AC3, PCM, MP2, MP3 Video H264, DivX4, DivX5, Xvid, MPEG2, MPEG4, VC-1 (WMV9) Audio AAC, AC3, MP2, PCM, MP3 Video H264, MPEG4, XviD Audio AC3, MP3, HE-AAC Video H264, MPEG4 Audio MP3 Video MPEG1, MPEG2 Audio MP3, MP2, PCM Video H264, Sorenson Audio AAC, MP3 MKV MP4 MOV MPEG FLV S
14 USING THE MONITOR SET Connecting or Disconnecting Wireless Router ENGLISH ENG The monitor must be connected to a wireless router to use DLNA. NOTE Automatic firmware update is possible only when the monitor is connected to a wireless router that is y connected to the Internet. The network connection may not be working properly depending on Internet Service Provider (ISP). y The wireless network may be affected by the interference from a device that uses 2.
USING THE MONITOR SET 15 3 When the Settings screen appears, select the [AP (Access Point) Search] and press the [Select] button. ENG ENGLISH SELECT EXIT Connect to your wireless network. You can enjoy the content from other devices easily through DLNA. Settings Miracast Device Search AP (Access Point) Search SELECT EXIT 4 When wireless routers are searched and displayed, select a wireless router to use and press the [Connect] button.
16 USING THE MONITOR SET 5 For a secured wireless router, the following screen appears asking to enter your password. ENGLISH ENG Enter the correct password and then move to the [OK] button by using the direction key. Press the [Select] button. Wir Wireless : AP Name 001 Ent Enter security key of network. Forgot your password? Contact your AP manufacturer. Forg Password: 4&-&$5 6 The wireless router connection is processed as shown below.
USING THE MONITOR SET 17 7 When the connection is successfully established, its status is displayed at the top right corner of the home screen. ENG ENGLISH AP Name 001 AP Name 001 LG_Monitor_C54A 2233 You can enjoy contents from smart devices directly on your monitor screen through SmartShare feature. Please execute Miracast, WiDi, DLNA function of your devices that you would like to connect to your monitor.
18 USING THE MONITOR SET Disconnecting Wireless Router ENGLISH ENG Follow the steps below to disconnect a wireless router. 1 On the SmartShare home screen, press the [Wi-Fi] button. /PU $POOFDUFE LG_Monitor_C54A 2233 You can enjoy contents from smart devices directly on your monitor screen through SmartShare feature. Please execute Miracast, WiDi, DLNA function of your devices that you would like to connect to your monitor.
USING THE MONITOR SET 19 3 Select the currently connected wireless router and then press the [Disconnect] button. y The connected wireless router appears to be the first on the [AP (Access Point) Search] screen. y When the connected wireless router is selected, the [Select] button is changed to the [Disconnect] button.
20 USING THE MONITOR SET Keyboard and Mouse Connection ENGLISH ENG LG IPS237W allows you to connect a keyboard and a mouse to the monitor through its USB ports on the back. When a computer is connected to the monitor, the keyboard and mouse of the computer are used. When the monitor is connected to a device via Wi-Di or Miracast (Wi-Fi screen share), the keyboard and mouse of the connected devices (smartphone or other devices) are used.
USING THE MONITOR SET WIRED CONNECTION HDMI connection Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations. D-SUB connection Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.
22 USING THE MONITOR SET Smartphone (MHL) Connection ENGLISH ENG Mobile High-definition Link (MHL) is an interface that allows you to play video and audio from your smartphone on the monitor by connecting the monitor and your smartphone. Connect the smartphone to the HDMI2/MHL terminal of the monitor using the supplied MHL signal cable and switch the input by pressing the input button of the monitor.
USING THE MONITOR SET CAUTION NOTE When you want to use two PC in our Monitor, y please connect the signal cable(D-SUB/ HDMI) respectively in Monitor set. If you turn the Monitor set on while it is cold, y the screen may flicker. This is normal. Some red, green, or blue spots may appear y on the screen. This is normal. Self Image Setting Function Press the power button on the bottom panel to turn the power on.
24 USING THE MONITOR SET WIRELESS CONNECTION ENGLISH ENG Check the followings before using the wireless connection. NOTE The "Switch Input Signal to Wireless Connection" function When the monitor is used in wired y connection (D-SUB, HDMI, MHL) or in energy saving mode, the monitor is wirelessly connected if it is connected via Wi-Di/Miracast or a content file plays via DLNA.
USING THE MONITOR SET 25 3 Turn on the wireless LAN from the computer. Wi-Di does not require the wireless router connection. For optimized performance, it is y recommended to connect the computer to a wireless router. 4 Pressing the Windows [Start] button and select [All Programs] > [Intel Corporation] > [Intel(R) WiDi] > [Intel WiDi]. 5 When the license agreement screen is displayed, read it and then press the Accept button.
26 USING THE MONITOR SET 8 When the [Rename adapter] window is displayed on the computer, rename the adapter and then press the [Continue] button. ENGLISH ENG Properties ? Help Rename adapter Enter a simple name that best describes your adapter. LG_Monitor_C54A For example: “Living Room” or “Bedroom”. The name is limited to 18 characters, consisting of the letters A through Z, numbers and punctuation marks except for “-”.
USING THE MONITOR SET 27 12 When the Intel WiDi properties window appears, press the [Resize TV picture] button. properties Behavior Adapter Adapter name: LG_Monitor_C54A Network address: 192.168.16.4 Adapter ID: C54A Adapter manufacturer: LG_Electronics Adapter model: TIGA Adapter hardware version: 2.1.1.0 Adapter firmware version: 2.1.0.0 Firmware is up to date. Automatically connect to this adapter Register your LG_Electronics TIGA adapter for support and updates.
28 USING THE MONITOR SET Miracast Connection ENGLISH ENG Miracast allows you to directly connect the monitor to a smartphone as well as various devices that support Miracast. NOTE Miracast may be used in different ways depending on device manufacturer or OS. y A device connected through Miracast cannot use a Wi-Fi network while the monitor is used.
USING THE MONITOR SET 29 Connecting from Monitor (power button) of the monitor and press the [Wi-Fi] button to go to the SmartShare home screen. 2 When the monitor name and ID are all displayed on the SmartShare home screen, press the [Wi-Fi] button. /PU $POOFDUFE LG_Monitor_C54A 2233 You can enjoy contents from smart devices directly on your monitor screen through SmartShare feature. Please execute Miracast, WiDi, DLNA function of your devices that you would like to connect to your monitor.
30 USING THE MONITOR SET 4 Turn on the Miracast in a device to connect. ENGLISH ENG NOTE As the menu names for Miracast may be different depending on the device to connect, refer to its y user guide for more information on how to use Miracast on the device. 5 When the device to connect is displayed, select the device and press the [Connect] button. Choose from Ch f the th list li t off devices d i to t connectt to t the th monitor.
USING THE MONITOR SET 31 7 When the connection is successful, the screen of a device connected to the monitor is displayed. The screen of a device connected to the monitor is displayed on the monitor within 10 seconds. y If the wireless environment is not good, a problem may occur with the screen display or Miracast may be disconnected. Miracast works only in the Copy mode (the same screen).
32 USING THE MONITOR SET Using DLNA ENGLISH ENG If the monitor and a device, such as a computer or a smartphone, that supports DLNA are connected through the same network, the media contents (video, picture, or music, etc.) of the devices can be displayed on the monitor. NOTE To use DLNA, the monitor must be connected to a wireless router. y For optimized performance, it is recommended to use a wireless router that supports 5 Ghz y frequency bandwidth.
USING THE MONITOR SET 33 SOFTWARE UPDATE CAUTION Do not turn off the monitor during the software update. y It may cause the monitor malfunction. NOTE To use the automatic software update function, the monitor must be connected to a wireless y router that has access to the Internet. If a wireless router is not connected, see [BEFORE USING] > [Connecting or Disconnecting y Wireless Router] section to connect a wireless router. ENG ENGLISH The LG IPS237W monitor supports automatic software update.
34 CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select EXIT to leave the OSD menu. Monitor set Buttons Button Description Accesses the main menus.(See p.
CUSTOMIZING SETTINGS 35 Customizing Settings ENG ENGLISH Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 $ % < = buttons. 3 Select the "NEXT MENU" button to enter the more option settings. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
36 CUSTOMIZING SETTINGS PICTURE ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Enter to PICTURE $ = $ 4 $ % < = buttons. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 37 COLOR ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select COLOR $ < $ 4 Enter to COLOR $ = $ 5 $ % < = buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
38 CUSTOMIZING SETTINGS DISPLAY ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select DISPLAY $ < $ 4 Enter to DISPLAY $ = $ 5 $ % < = buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 39 OTHERS ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select OTHERS $ < $ 4 Enter to OTHERS $ = $ 5 $ % < = buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
40 CUSTOMIZING SETTINGS Wi-Fi Setting ENGLISH ENG 1 Press the Wi-Fi button at the bottom of the screen to make the Wi-Fi OSD appear. 2 For more information, please See p.14 3 Select EXIT to leave the OSD menu. /PU $POOFDUFE LG_Monitor_C54A 2233 You can enjoy contents from smart devices directly on your monitor screen through SmartShare feature. Please execute Miracast, WiDi, DLNA function of your devices that you would like to connect to your monitor.
CUSTOMIZING SETTINGS 41 FUNC. Setting ENG ENGLISH VOLUME 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select VOLUME $ < $ 3 Enter to VOLUME $ = $ 4 $ % < = buttons. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. FUNC.
42 CUSTOMIZING SETTINGS SUPER ENERGY SAVING ENGLISH ENG 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select SUPER ENERGY SAVING $ < button. 3 Enter to SUPER ENERGY SAVING $ = button. 4 $ % < =$ 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
TROUBLESHOOTING 43 TROUBLESHOOTING No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator Red? Is the power indicator flickering? Do you see an "OUT OF RANGE" message on the screen? Do you see a "NO SIGNAL" message on the screen? y Check and see if the power cord is connected properly to the power outlet. y Press the Power button. y Adjust the brightness and the contrast.
44 TROUBLESHOOTING CAUTION ENGLISH ENG Check and see if the frequency or the resolution were y changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the y screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
WIFI 45 Product specifications may be changed without prior notice due to upgrade of product functions. Standard IEEE802.11a/b/g/n Frequency Range 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz Modulation CCK / OFDM / MIMO 802.11a: 11 dBm 802.11b: 15 dBm 802.11g: 13 dBm 802.11n - 2.4GHz: 13 dBm 802.11n - 5GHz: 13 dBm Output Power (Typical) 802.11a/g: 54 Mbps 802.11b: 11 Mbps 802.11n: 300 Mbps Data rate 2400 to 2483.5 MHz: -2.5dBi 5150 to 5250 MHz: -2.2dBi 5725 to 5850 MHz: -2.
46 SPECIFICATIONS SPECIFICATIONS ENGLISH ENG Display Screen Type 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 58.4 cm Sync Input Pixel Pitch Horizontal Frequency Vertical Frequency 0.265 mm x 0.265 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB) 56Hz to 61Hz(HDMI) Separate Sync.
SPECIFICATIONS 47 Preset Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.
48 PROPER POSTURE PROPER POSTURE ENGLISH ENG Proper posture for using the Monitor set. Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor set to avoid it reflecting light.
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com .
Regulatory Information cont. FCC Compliance Statement respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements.
Regulatory Information cont. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal.
Regulatory Information cont. • exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available.
Regulatory Information cont. operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG.
Regulatory Information cont. Italiano respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, económicos y medioambientales. Informazioni per la tutela dell’ambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente più pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale.
Regulatory Information cont. especificamente o conceito de favorável ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, não há cádmio em nossos monitores. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. Informações relacionadas à reciclagem Este monitor pode conter peças que podem representar riscos ao ambiente.
Regulatory Information cont. ÕÂÓ·ıÓ‰ËÏÓ ÛÚËÎËÁËÓ‚‡Ú¸ ÏÓÌËÚÓ ÔÓÒΠËÒÔÓθÁÓ‚‡Ìˡ. KÓÔÓ‡ˆËˇ LGE Ô‡·‡Ú˚‚‡ÂÚ ‚Ò ·‡ÍÓ‚‡ÌÌ˚ ÏÓÌËÚÓ˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚. œÓ ‚ÒÂÏÛ ÏËÛ ‰ÂÈÒÚ‚Û˛Ú ÒËÒÚÂÏ˚ ÛÚËÎËÁ‡ˆËË ÓÚıÓ‰Ó‚ Ë ‚ÓÁ‚‡Ú‡ ËÒÔÓθÁÓ‚‡ÌÌÓÈ ÔÓ‰Û͈ËË. ÃÌÓ„Ë ÍÓÏÔÓÌÂÌÚ˚ ·Û‰ÛÚ ‚ÚÓ˘ÌÓ ËÒÔÓθÁÓ‚‡Ì˚ Ë ÛÚËÎËÁËÓ‚‡Ì˚, ‚ ÚÓ ‚ÂÏˇ Í‡Í ‚‰Ì˚ ‚¢ÂÒÚ‚‡ Ë ÚˇÊÂÎ˚ ÏÂÚ‡ÎÎ˚ ·Û‰ÛÚ Ó·‡·ÓÚ‡Ì˚ Ò ÔÓÏÓ˘¸˛ ˝ÍÓÎӄ˘ÂÒÍË ÔËÂÏÎÂÏÓ„Ó ÏÂÚÓ‰‡.
Regulatory Information cont. WEEE un bidone della spazzatura barrato da una croce significa che il prodotto è coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorità locali. 3.
Regulatory Information cont. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger på miljøet og menneskelig sundhed. 4.
Regulatory Information cont.
Regulatory Information cont.
